Testing tap from the WAGO 2000 series for tool-free connection of individual test leads between 0.08 and 2.5mm².

• Grey colour
• Height 48.3mm
• Width 19.3mm
• Depth 8mm
• Manufacturer's part 2009-182

Snap-on group marker carrier from WAGO suitable for use with TOPJOB® terminal blocks.

• Colour: grey
• Width: 5mm
• Manufacturer's part 2009-191

Snap-on group marker carrier from WAGO suitable for use with TOPJOB® terminal blocks.

• Colour: grey
• Width: 10mm
• Manufacturer's part 2009-192

Snap-on group marker carrier from WAGO suitable for use with TOPJOB® terminal blocks.

• Colour: grey
• Width: 15mm
• Manufacturer's part 2009-193

Snap-on group marker carrier from WAGO suitable for use with TOPJOB® jumper slots.

• Colour: grey
• Width: 10mm
• Manufacturer's part 2009-196

Busbar carrier from the WAGO 2009 series, for DIN 35 rail

• Colour: blue
• Height: 42.5mm
• Depth 96mm
• Width: 1.5mm
• Manufacturer's part 2009-304

The WAGO Bus Bar Carrier Blue (for 35mm rail) can replace an end bracket, with detachable snap-on fixing for DIN 35 rail 7.5mm/0.295in thick.

• 2009-305
• With end bracket function and breakaway separating plate
• 42.5 x 7.5 x 96mm (H x W x D)
• Blue colour

Operating tool with 2.5 and 3.5mm blades from WAGO, suitable for TOPJOB® terminal blocks.

• Manufacturer's part 2009-309

Operating tool with 3.5 and 5.5mm blades from WAGO, suitable for TOPJOB® terminal blocks.

• Manufacturer's part 2009-310

WAGO 2009-412 16A 1.5 x 60mm insulated push-in jumper wire for multi-level installation terminal blocks, colour - black. For wire sizes. Pack size 100.

• Colour: Black
• Content: 100 pc(s)
• Manufacturer part No.: 2009-412
• Type (manufacturer type): 2009-412
• Weight: 2.042g

WAGO 2009-414 16A 1.5 x 110mm insulated push-in jumper wire for multi-level installation terminal blocks, colour - black. For wire sizes. Pack size 100.

• Colour: Black
• Content: 100 pc(s)
• Manufacturer part No.: 2009-414
• Type (manufacturer type): 2009-414
• Weight: 2.642g

WAGO 2009-416 16A 1.5 x 250mm insulated push-in jumper wire for multi-level installation terminal blocks, colour - black. For wire sizes. Pack size 100.

• Colour: Black
• Content: 100 pc(s)
• Manufacturer part No.: 2009-416
• Type (manufacturer type): 2009-416
• Weight: 5.6g

WAGO 2010-100 touchproof finger guard for 2010 series, colour - yellow. For wire sizes. Pack size 100.

• Colour: Yellow
• Content: 100 pc(s)
• Manufacturer part No.: 2010-100
• Type (manufacturer type): 2010-100
• Weight: 0.18g

Protective high voltage warning markers from WAGO suitable for use with terminal blocks from the 2010 series.

• Colour: yellow
• Manufacturer's part 2010-115

The WAGO DIN Rail Terminal Block, Spring Cage 10mm 57A Grey is a 2-conductor ground terminal block suitable for exe applications. The protective conductor terminal 2010 made possible by the CAGE CLAMP connector, simple plug from a wire and flexible, provided with crimped ferrules, connectors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2010-1201
• Grey colour
• CAGE CLAMP®S Connection
• 37 x 10 x 68mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 10mm 57A Blue is a 2-conductor ground terminal block suitable for exe applications. The protective conductor terminal 2010 made possible by the CAGE CLAMP connector, simple plug from a wire and flexible, provided with crimped ferrules, connectors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2010-1204
• Blue colour
• CAGE CLAMP®S Connection
• 37 x 10 x 68mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 10mm 57A Green-Yellow is a 2-conductor ground terminal block suitable for exe applications. The protective conductor terminal 2010 made possible by the CAGE CLAMP connector, simple plug from a wire and flexible, provided with crimped ferrules, connectors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2010-1207
• Green-yellow colour
• CAGE CLAMP®S Connection
• 37 x 10 x 68mm (H x W x D)

WAGO 2010-1291 1mm end and intermediate plate for TOPJOB®s 2010-1200 terminal blocks, colour - grey. For wire sizes. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, height: 36.5mm
• Dimensions, length: 1mm
• Manufacturer part No.: 2010-1291
• Type (manufacturer type): 2010-1291
• Weight: 2.36g

End and intermediate plate from the WAGO 2010 series, suitable for TOPJOB® terminal blocks.

• Colour: orange
• Height 33.5mm
• Depth 67.2mm
• Width 1mm
• Manufacturer's part: 2010-1292

The WAGO DIN Rail Terminal Block, Spring Cage 10mm 57A Grey is a 3-conductor through terminal block suitable for exe applications. The protective conductor terminal 2010 made possible by the CAGE CLAMP connector, simple plug from a wire and flexible, provided with crimped ferrules, connectors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2010-1301
• Grey colour
• CAGE CLAMP®S Connection
• 37 x 10 x 89mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 10mm 57A Blue is a 3-conductor through terminal block suitable for exe applications. The protective conductor terminal 2010 made possible by the CAGE CLAMP connector, simple plug from a wire and flexible, provided with crimped ferrules, connectors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2010-1304
• Blue colour
• CAGE CLAMP®S Connection
• 37 x 10 x 89mm (H x W x D)

A 3-conductor ground terminal block from the WAGO 2010 series, suitable for Ex e II applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Green/yellow colour
• Front-entry wiring
• Wire size 20 to 6 AWG
• Height 36.9mm
• Depth 89mm
• Width 10mm
• Manufacturer's part 2010-1307

End and intermediate plate from the WAGO 2010 series, suitable for TOPJOB® terminal blocks.

• Colour: grey
• Height 36.5mm
• Depth 88.6mm
• Width 1mm
• Manufacturer's part: 2010-1391

End and intermediate plate from the WAGO 2010 series, suitable for TOPJOB® terminal blocks.

• Colour: orange
• Height 33.5mm
• Depth 88.6mm
• Width 1mm
• Manufacturer's part: 2010-1392

Insulated push-in 2-way jumper bar from WAGO, suitable for use with the 2010 series of DIN rail connectors.

• Colour: Light grey
• Rated voltage: 800V
• Rated current: 57A
• Width: 17.5mm
• Height: 23mm
• Depth: 4.1mm
• Manufacturer's part 2010-402

Insulated push-in 3-way jumper bar from WAGO, suitable for use with the 2010 series of DIN rail connectors.

• Colour: Light grey
• Rated voltage: 800V
• Rated current: 57A
• Width: 27.5mm
• Height: 23mm
• Depth: 4.1mm
• Manufacturer's part 2010-403

Insulated push-in 4-way jumper bar from WAGO, suitable for use with the 2010 series of DIN rail connectors.

• Colour: Light grey
• Rated voltage: 800V
• Rated current: 57A
• Width: 37.6mm
• Height: 23mm
• Depth: 4.1mm
• Manufacturer's part 2010-404

Insulated push-in 5-way jumper bar from WAGO, suitable for use with the 2010 series of DIN rail connectors.

• Colour: Light grey
• Rated voltage: 800V
• Rated current: 57A
• Width: 47.6mm
• Height: 23mm
• Depth: 4.1mm
• Manufacturer's part 2010-405

WAGO 2010-511 1-pole, DIN rail mount connector, colour - grey. For wire sizes AWG 20-10. Pack size 50.

• AWG max.: 10
• AWG min.: 20
• Colour: Grey
• Connection (components): Pull spring
• Connector type (category): Punch-down block
• Content: 50 pc(s)
• Dimensions, length: 10mm
• Dimensions, width: 10mm
• Manufacturer part No.: 2010-511
• Max. cross section (flexible): 6mm²
• Max. cross section (inflexible): 4mm²
• Min. cross section (flexible): 0.5mm²
• Min. cross section (unflexible): 0.5mm²
• No. of rows: 1
• Nominal current: 32 A
• Nominal voltage: 500 V
• Number of pins: 1
• Pins per row: 1
• Rated surge voltage: 6 kV
• Type (manufacturer type): 2010-511
• Weight: 4.895g

WAGO 2016-100 touchproof finger guard for 2016 series, colour - yellow. For wire sizes. Pack size 100.

• Colour: Yellow
• Content: 100 pc(s)
• Manufacturer part No.: 2016-100
• Type (manufacturer type): 2016-100
• Weight: 0.24g

Protective high voltage warning marker from WAGO, suitable for use with up to 5 terminal blocks from the 2016 series.

• Colour: yellow
• Manufacturer's part 2016-115

The WAGO DIN Rail Terminal Block, Spring Cage 12mm 76A Grey is a 2-conductor through terminal block suitable for exe applications. The direct plug-Series 2016 protects against handling errors and allows simple plug of single-wire and stranded conductors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2016-1201
• Grey colour
• CAGE CLAMP®S Connection
• 37 x 12 x 70mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 12mm 76A Blue is a 2-conductor through terminal block suitable for exe applications. The direct plug-Series 2016 protects against handling errors and allows simple plug of single-wire and stranded conductors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2016-1204
• Blue colour
• CAGE CLAMP®S Connection
• 37 x 12 x 70mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 12mm 76A Green-Yellow is a 2-conductor through terminal block suitable for exe applications. The direct plug-Series 2016 protects against handling errors and allows simple plug of single-wire and stranded conductors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2016-1207
• Green-yellow colour
• CAGE CLAMP®S Connection
• 37 x 12 x 70mm (H x W x D)

End and intermediate plate from WAGO suitable for use with TOP JOB® terminal blocks from the 2016-1200 series.

• Colour: orange
• Manufacturer's part 2016-1292

The WAGO DIN Rail Terminal Block, Spring Cage 12mm 76A Grey is a 3-conductor through terminal block suitable for exe applications. The direct plug-Series 2016 protects against handling errors and allows simple plug of single-wire and stranded conductors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2016-1301
• Grey colour
• CAGE CLAMP®S Connection
• 37 x 12 x 92mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 12mm 76A Blue is a 3-conductor through terminal block suitable for exe applications. The direct plug-Series 2016 protects against handling errors and allows simple plug of single-wire and stranded conductors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2016-1304
• Blue colour
• CAGE CLAMP®S Connection
• 37 x 12 x 92mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 12mm 76A Green-Yellow is a 3-conductor through terminal block suitable for exe applications. The direct plug-Series 2016 protects against handling errors and allows simple plug of single-wire and stranded conductors.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2016-1307
• Green-yellow colour
• CAGE CLAMP®S Connection
• 37 x 12 x 92mm (H x W x D)

End and intermediate plate from WAGO suitable for use with TOP JOB® terminal blocks from the 2016-1300 series.

• Colour: orange
• Manufacturer's part 2016-1392

Insulated 2-way 76A push-in jumper bar from WAGO, suitable for use with the 2016 series of DIN rail connectors.

• Colour: Light grey
• Rated voltage: 800V
• Rated current: 76A
• Width: 21.4mm
• Height: 23mm
• Depth: 4.1mm
• Manufacturer's part 2016-402

Insulated 3-way 76A push-in jumper bar from WAGO, suitable for use with the 2016 series of DIN rail connectors.

• Colour: Light grey
• Rated voltage: 800V
• Rated current: 76A
• Width: 33.4mm
• Height: 23mm
• Depth: 4.1mm
• Manufacturer's part 2016-403

Insulated 4-way 76A push-in jumper bar from WAGO, suitable for use with the 2016 series of DIN rail connectors.

• Colour: Light grey
• Rated voltage: 800V
• Rated current: 76A
• Width: 45.5mm
• Height: 23mm
• Depth: 4.1mm
• Manufacturer's part 2016-404

Insulated 5-way 76A push-in jumper bar from WAGO, suitable for use with the 2016 series of DIN rail connectors.

• Colour: Light grey
• Rated voltage: 800V
• Rated current: 76A
• Width: 57.5mm
• Height: 23mm
• Depth: 4.1mm
• Manufacturer's part 2016-405

WAGO 2016-7111 1 conductor disconnect, DIN rail mount terminal block, colour - grey. For wire sizes AWG 20-4. Pack size 25.

• AWG max.: 4
• AWG min.: 20
• Colour: Grey
• Connection (components): Pull spring
• Connector type (category): PD Terminal
• Content: 25 pc(s)
• Dimensions, height: 38.1mm
• Dimensions, length: 12mm
• Dimensions, width: 12mm
• Manufacturer part No.: 2016-7111
• Max. cross section (flexible): 25mm²
• Max. cross section (inflexible): 16mm²
• Min. cross section (flexible): 0.5mm²
• Min. cross section (unflexible): 0.5mm²
• No. of rows: 1
• Nominal current: 76 A
• Nominal voltage: 250 V
• Number of pins: 1
• Pins per row: 1
• Rated surge voltage: 4 kV
• Type (manufacturer type): 2016-7111
• Weight: 24.932g

A 2-conductor supply terminal block from the WAGO 2016 series, suitable for use with distribution boxes.

• Wire size 20 to 4 AWG
• Colour: grey
• Connection: pull spring
• Height 40.8mm
• Depth 85.7mm
• Width 12mm
• Nominal current: 76A
• Manufacturer's type 2016-7601

A 2-conductor supply terminal block from the WAGO 2016 series, suitable for use with distribution boxes.

• Wire size 20 to 4 AWG
• Colour: blue
• Connection: pull spring
• Height 40.8mm
• Depth 85.7mm
• Width 12mm
• Nominal current: 76A
• Manufacturer's type 2016-7604

A 2-conductor ground supply terminal block from the WAGO 2016 series.

• Function: PE
• Wire size 20 to 4 AWG
• Colour: green/yellow
• Connection: pull spring
• Height 40.8mm
• Depth 85.7mm
• Width 12mm
• Nominal current: 76A
• Manufacturer's type 2016-7607

End and intermediate plate from WAGO suitable for use with TOP JOB® terminal blocks from the 2016-7600 series.

• Colour: orange
• Height 41.7mm
• Depth 84.5mm
• Width 1mm
• Manufacturer's part 2016-7692

WAGO 2016-7711 1 conductor disconnect, DIN rail mount terminal block, colour - grey. For wire sizes AWG 20-4. Pack size 20.

• Function: L
• AWG max.: 4
• AWG min.: 20
• Colour: Grey
• Connection (components): Pull spring
• Connector type (category): PD Terminal
• Content: 20 pc(s)
• Dimensions, height: 40.8mm
• Dimensions, length: 12mm
• Dimensions, width: 12mm
• Manufacturer part No.: 2016-7711
• Max. cross section (flexible): 25mm²
• Max. cross section (inflexible): 16mm²
• Min. cross section (flexible): 0.5mm²
• Min. cross section (unflexible): 0.5mm²
• No. of rows: 1
• Nominal current: 76 A
• Nominal voltage: 250 V
• Number of pins: 1
• Pins per row: 1
• Rated surge voltage: 4 kV
• Type (manufacturer type): 2016-7711
• Weight: 34.106g

A 1 conductor N-disconnect DIN rail mount terminal block from the WAGO 2016 series.

• Function: N
• Wire size 20 to 4 AWG
• Colour: blue
• Connection: pull spring
• Height 40.8mm
• Depth 86mm
• Width 12mm
• Nominal current: 76A
• Nominal voltage: 250V
• Manufacturer's type 2016-7714