This multiple interface module from CamdenBoss has 3 IDC dual row headers with 20, 24 and 26 ways and screw terminals and is suitable for 35mm DIN rail mounting.

• Long ejector latches for strain relief sockets
• 45° terminals for easy access
• Voltage rating 50V DC
• Current rating 100mA
• Dimensions (H x W x L) 56 x 83 x 80mm
• Option for 32mm (G) rail mounting
• Available with optional wall mounting plates
• Manufacturer's part CIM/202426W-IDCS

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

This interface module from CamdenBoss provides a quick, compact means of connecting two RJ45 cables.

• Includes 2 RJ45 (8P8C) shielded sockets
• Connected pin to pin (1 to 1, 2 to 2 etc)
• 35mm DIN rail mounting
• Option for 32mm (G) rail mounting
• Reverse tab sockets for ease of cable release
• Available with optional wall mounting plates
• Voltage rating 50V DC
• Current rating 500mA
• Size (H x W x L) 42 x 83 x 23mm
• Manufacturer's part CIM/RJ45

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

An insulated jumper bar designed as a shorting link for CTS terminal in DIN rail applications.

• 2.5mm pitch
• 10-Way

An insulated jumper bar designed as a shorting link for CTS terminal in DIN rail applications.

• 16mm pitch
• 10-Way

An insulated jumper bar designed as a shorting link for CTS terminal in DIN rail applications.

• 25mm pitch
• 10-Way

An insulated jumper bar designed as a shorting link for CTS terminal in DIN rail applications.

• 35mm pitch
• 10-Way

A grey 4mm double decker terminal for Top Hat and G-Rail mounting DIN rail units.

This terminal is the ideal solution for high density wiring applications.

• Double density wiring
• Interconnection / shorting at both levels
• K type ID markers can be fitted at both levels
• Fits both TS32 and TS35 profile rails
• Polyamide construction
• UR, CSA, VDE certified
• Colour: grey

An end plate for 4mm knife disconnect terminals. Used to cover the live parts of the last terminal block in a DIN rail mounting unit, making the assembly finger safe.

• Designed for CTS terminals

A grey 25mm terminal for Top Hat and G-Rail mounting DIN rail units.

• Fits both TS32 and TS35 profiles
• Polyamide construction
• UR, CSA, VDE certified
• Colour:grey

A grey 50mm terminal for Top Hat and G-Rail mounting DIN rail units.

• Fits both TS32 and TS35 profiles
• Polyamide construction
• UR, CSA, VDE certified
• Colour: grey

An end plate for 6 to 10mm terminals. Used to cover the live parts of the last terminal block in a DIN rail mounting unit, making the assembly finger safe.

• Designed for CTS terminals

An end plate for 25mm terminals. Used to cover the live parts of the last terminal block in a DIN rail mounting unit, making the assembly finger safe.

• Designed for CTS terminals

A partition plate that serves to identify and segregate DIN rail terminal block groups. Can be used to electrically isolate adjacent cross connection sets. The partition plate also maintains the required creepage and clearance values in the assembly.

• For 6 to 10mm terminals
• Designed for CTS terminals

A partition plate that serves to identify and segregate DIN rail terminal block groups. Can be used to electrically isolate adjacent cross connection sets. The partition plate also maintains the required creepage and clearance values in the assembly.

• For 25mm terminals
• Designed for CTS terminals

An end plate for 4mm double decker terminals. Used to cover the live parts of the last terminal block in a DIN rail mounting unit, making the assembly finger safe.

• Designed for CTS terminals

An end plate for 2.5 to 4mm terminals. Used to cover the live parts of the last terminal block in a DIN rail mounting unit, making the assembly finger safe.

• Designed for CTS terminals

A yellow/green 10mm earth terminal for Top Hat and G-Rail mounting DIN rail units.

• Colour: Green/yellow
• Clamps to DIN rail
• Tin-plated brass foot for low contact resistance
• Vibration-proof grounding (tighten central screw)
• High-torque clamping yokes
• UR, CSA, VDE certified

A yellow/green 6mm earth terminal for Top Hat and G-Rail mounting DIN rail units

• Colour: Green/yellow
• Clamps to DIN rail
• Tin-plated brass foot for low contact resistance
• Vibration-proof grounding (tighten central screw)
• High-torque clamping yokes
• UR, CSA, VDE certified

A grey 2.5mm terminal for Top Hat and G-Rail mounting DIN rail units

• Fits both TS32 and TS35 profiles
• Polyamide construction
• UR, CSA, VDE certified
• Colour:grey

A grey 6mm terminal for Top Hat and G-Rail mounting DIN rail units

• Fits both TS32 and TS35 profiles
• Polyamide construction
• UR, CSA, VDE certified
• Colour:grey

Din Rail terminal block from Phoenix Contact, screw connection, 15.2mm width.

• Yellow and green colour
• Length 55mm
• Connection cross-section 0.75-35mm²

The Phoenix Contact Installation Terminal Block 24A is a high quality feed-through terminal ideal for mounting on 15 and 35mm top-hat rails. Designed to be space saving thanks to compact design and mounting option on a 15mm DIN rail, while the fixed bridges and test sockets can be used on both levels.

• Clear arrangement thanks to marking of all terminal points
• Easy potential distribution thanks to standardized plug-in bridges
• MBKKB 2,5

A 4-tier DIN rail mounting terminal block which can be used with initiators and actuators.

The upper level contains the feed-through connections for the signal cable which can be labelled. The PE connection is located in the lower level. The two middle terminal points supply potential to the initiator.

• Width: 6.2mm
• Colour: Grey
• AWG (min.): 24
• Length: 62.5mm
• AWG max.: 14
• Height: 77.5mm
• Compatible with transit terminals screw connection
• Max. cross section (inflexible): 4mm²
• Nominal voltage 250V
• Min. cross section (flexible) 0.2mm²
• Nominal current 24A
• Min. cross section (unflexible) 0.2mm²
• Max. stripping length 8mm
• Max. cross section (flexible) 2.5mm²
• Phoenix contact part No. 2718015
• Phoenix contact type VIOK 1,5

The Phoenix Contact DIN Rail Terminal Block 20mm (W) is a high quality feed-through terminal designed with a reliable cable connection, ensured by three-point centering of the conductor in the prismatic sleeve base. Low contact resistance of the contact surface due to ribbing. Screw locking by means of spring-loaded elements in the clamping part.

• Grey colour
• Closed housing
• Screw connection
• Mounting type: NS 35/15, NS 32
• UKH 50

The Phoenix Contact Tension-Spring Terminal with Earth Conductor 0.2-16mm² ST 10-PE is a ground modular terminal block with spring-cage connection.

• Green-yellow

The Phoenix Contact DIN Rail Terminal Block 5.2mm (W) Green-Yellow is a feed-through terminal block with screw connection.

• Mounting type: NS 35/7.5, NS 35/15

The Phoenix Contact DIN Rail Terminal Block 10.2mm Width, Green-Yellow is a feed-through terminal block with screw connection.

• Mounting type: NS 35/7.5, NS 35/15

Knife disconnect Din Rail 16A screw terminal block from Phoenix Contact.

• Screw connection with test socket screws
• Cross section 0.2mm² - 4mm² (AWG: 24 - 12)
• Nominal current 16A
• Nominal voltage 400V
• Length 46mm, width 5.2mm
• Colour grey
• Assembly NS 35/7.5, NS 35/15, NS 32

End plate from Schneider Electric suitable for use with single level terminal blocks.

• Thickness: 2.2mm
• Range: Linergy
• Suitable for cable cross-section 2.5 to 10mm²
• Colour: grey
• Manufacturer's part NSYTRAC22

A grey, DIN rail mounting 2.5mm² feed-through terminal from Schneider Electric's Linergy TR range.

• Nominal cable cross section: 2.5mm²
• Colour: grey
• Terminal block type: feed-through
• Mounting mode: clip-on
• Terminal block level: 1
• Length: 47.7mm
• Schneider Electric type NSYTRV22

A green/yellow, DIN rail mounting 2.5mm² feed-through terminal from Schneider Electric's Linergy TR range.

• Nominal cable cross section: 2.5mm²
• Colour: green/yellow
• Terminal block type: feed-through
• Mounting mode: clip-on
• Terminal block level: 1
• Length: 47.7mm
• Schneider Electric type NSYTRV22PE

A grey, DIN rail mounting 6mm² feed-through terminal from Schneider Electric's Linergy TR range.

• Nominal cable cross section: 6mm²
• Colour: grey
• Terminal block type: feed-through
• Mounting mode: clip-on
• Terminal block level: 1
• Length: 47.7mm
• Schneider Electric type NSYTRV62

The WAGO DIN Rail Terminal Block, Spring Cage Blue 3.5mm 13.5A is a 2-conductor through terminal suitable for exe applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

The WAGO DIN Rail Terminal Block, Spring Cage Green/Yellow 3.5mm 13.5A is a 2-conductor through terminal suitable for exe applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in.

With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Green/yellow colour
• Wire gauge 16AWG
• Max. conductor size 1.5mm²
• Height 33mm
• Width 3.5mm
• Depth 48.5mm
• Manufacturer's part 2000-1207

Pivoting double-decker marker carrier from WAGO suitable for use with DIN Rail connectors.

• Colour: grey
• Manufacturer's part 2000-121

An end or intermediate plate for WAGO 2000-1201 to 2000-1212 terminals.

• Colour: orange
• Height: 48.5mm
• Thickness: 0.7mm
• Length: 33mm
• WAGO type 2000-1292

The WAGO DIN Rail Terminal Block, Spring Cage Grey 3.5mm 13.5A is a 3-conductor through terminal suitable for exe applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in.

With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Grey colour
• Rated current 13A
• Wire gauge 16AWG
• Max. conductor size 1.5mm²
• Height 33mm
• Width 3.5mm
• Depth 58.2mm
• Manufacturer's part 2000-1301

This DIN Rail terminal block with spring cage from WAGO has 3 through terminals suitable for Ex i applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be simply pushed in.

With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks. They have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Blue colour
• Rated current 13.5A
• Wire gauge 16AWG
• Max. conductor size 1.5mm²
• Height 33mm
• Width 3.5mm
• Depth 58.2mm
• Manufacturer's part 2000-1304

The WAGO DIN Rail Terminal Block, Spring Cage Green-Yellow 3.5mm 13.5A is a 3-conductor through terminal suitable for exe applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Green/yellow colour
• Wire gauge 16AWG
• Max. conductor size 1.5mm²
• Height 33mm
• Width 3.5mm
• Depth 58.2mm
• Manufacturer's part 2000-1307

An end or intermediate plate for WAGO 2000-1301 to 2000-1312 terminals.

• Colour: orange
• Height: 58.2mm
• Thickness: 0.7mm
• Length: 33mm
• WAGO type 2000-1392

This DIN Rail terminal block with spring cage from WAGO has 4 through terminals suitable for Ex i applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be simply pushed in.

With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks. They have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

This DIN Rail terminal block with spring cage from WAGO has 4 through terminals suitable for Ex i applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be simply pushed in.

With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks. They have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

An end or intermediate plate for WAGO 2000-1401 to 2000-1412 terminals.

• Orange colour
• 33 x 0.7 x 67.9mm (H x W x D)
• WAGO type 2000-1492

The WAGO DIN Rail Terminal Block, Spring Cage 3.5mm L/L Grey is a TOPJOBS double level terminal without label slot.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

Double-deck through/through terminal blocks from the WAGO TOPJOB® 2000 series, suitable for DIN Rail mounting.

• Colour: grey
• Suitable for AWG 16 to 24
• Current rating: 13.5A
• Number of ways: 4
• Manufacturer's part 2000-2202

Double-deck through/through terminal block from the WAGO TOPJOB® 2000 series, suitable for DIN Rail mounting.

• Colour: blue
• Suitable for AWG 16 to 24
• Current rating: 13.5A
• Number of ways: 4
• Manufacturer's part 2000-2204

The WAGO DIN Rail Terminal Block, Spring Cage 3.5mm L/L Grey is a TOPJOBS double-level terminal with label holder.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2000-2231
• Grey colour
• CAGE CLAMP®S Connection
• 62 x 3.5 x 70mm (H x W x D)
• Through/Through L/L with marker carrier

The WAGO DIN Rail Terminal Block, Spring Cage 3.5mm N/N Blue is a TOPJOBS double-level terminal with label holder.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2000-2234
• Blue colour
• CAGE CLAMP®S Connection
• 62 x 3.5 x 70mm (H x W x D)
• Through/Through N/N with marker carrier

The WAGO DIN Rail Terminal Block, Spring Cage 3.5mm P/E Green-Yellow is a TOPJOBS 4-conductor double-level terminal without label holder, internally bridged, with violet printed conductor entry.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2000-2237
• Green-yellow colour
• CAGE CLAMP®S Connection
• 62 x 3.5 x 70mm (H x W x D)
• Ground P/E with marker carrier

An end or intermediate plate for WAGO 2000 series terminals.

• Colour: orange
• Height: 51.7mm
• Length: 0.7mm
• Weight: 2.06g
• WAGO type 2000-2292