The WAGO 2-Way Jumper Link for Through Clamps Series 2000 is a push-in type jumper bar that is insulated - 2-pole, nominal current 14A.

• 2000-402
• Light Grey
• 19 x 5.87 x 4.1mm (H x W x D)

The WAGO 3-Way Jumper Link for Through Clamps Series 2000 is a push-in type jumper bar that is insulated - 3-pole, nominal current 14A.

• 2000-403
• Light Grey
• 19 x 9.39 x 4.1mm (H x W x D)

The WAGO 4-Way Jumper Link for Through Clamps Series 2000 is a push-in type jumper bar that is insulated - 4-pole, nominal current 14A.

• 2000-404
• Light Grey
• 19 x 12.91 x 4.1mm (H x W x D)

The WAGO 6-Way Jumper Link for Through Clamps Series 2000 is a push-in type jumper bar that is insulated - 6-pole, nominal current 14A.

• 2000-406
• Light Grey
• 19 x 19 x 4.1mm (H x W x D)

The WAGO 7-Way Jumper Link for Through Clamps Series 2000 is a push-in type jumper bar that is insulated - 7-pole, nominal current 14A.

• 2000-407
• Light Grey
• 19 x 23.47 x 4.1mm (H x W x D)

The WAGO 8-Way Jumper Link for Through Clamps Series 2000 is a push-in type jumper bar that is insulated - 8-pole, nominal current 14A.

• 2000-408
• Light Grey
• 19 x 26.99 x 4.1mm (H x W x D)

The WAGO 9-Way Jumper Link for Through Clamps Series 2000 is a push-in type jumper bar that is insulated - 9-pole, nominal current 14A.

• 2000-409
• Light Grey
• 19 x 30.51 x 4.1mm (H x W x D)

The WAGO 10-Way Jumper Link for Through Clamps Series 2000 is a push-in type jumper bar that is insulated - 10-pole, nominal current 14A.

• 2000-410
• Light Grey
• 19 x 34.03 x 4.1mm (H x W x D)

The WAGO Jumper Link 1-3 for Through Terminals Series 2000 is a push-in type jumper bar that is insulated - nominal current 14A.

• 2000-433
• Light Grey
• 19 x 9.39 x 4.1mm (H x W x D)

The WAGO Jumper Link 1-4 for Through Terminals Series 2000 is a push-in type jumper bar that is insulated - nominal current 14A.

• 2000-434
• Light Grey
• 19 x 12.91 x 4.1mm (H x W x D)

The WAGO Jumper Link 1-5 for Through Terminals Series 2000 is a push-in type jumper bar that is insulated - nominal current 14A.

• 2000-435
• Light Grey
• 19 x 16.43 x 4.1mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 4.2mm Grey Circuit II is a 4-conductor LED terminal block with red LED DC 24V.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2001-1421/1000-413
• CAGE CLAMP®S Connection
• 33 x 4.2 x 70mm (H x W x D)

Protective high voltage warning marker from WAGO for use with double deck terminal blocks from the TOPJOBS® S family.

• Colour: Yellow
• Manufacturer's part: 2001-115

This DIN rail through terminal blocks from WAGO has 2 conductors and is suitable for Ex e II applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Grey colour
• Current rating 18A
• Wire gauge 16AWG
• Max. conductor size 2.5mm²
• Size 33 x 4.2 x 48.5mm
• Manufacturer's part 2001-1201

This DIN rail through terminal blocks from WAGO has 2 conductors and is suitable for Ex e II applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Blue colour
• Current rating 18A
• Wire gauge 16AWG
• Max. conductor size 2.5mm²
• Size 33 x 4.2 x 48.5mm
• Manufacturer's part 2001-1204

This DIN rail through terminal blocks from WAGO has 2 conductors and is suitable for Ex e II applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Green/yellow colour
• Current rating 18A
• Wire gauge 16AWG
• Max. conductor size 2.5mm²
• Size 33 x 4.2 x 48.5mm
• Manufacturer's part 2001-1207

The WAGO DIN Rail Terminal Block, Spring Cage 4.2mm Grey Circuit II is a 2-conductor diode terminal block with diode 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2001-1211/1000-410
• CAGE CLAMP®S Connection
• 33 x 4.2 x 48.5mm (H x W x D)

This spring cage 2-conductor diode terminal block with diode 1N4007 from WAGO uses the CAGE CLAMP®S connection technique which allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Colour: grey
• Size 33 x 4.2 x 48.5mm
• Current rating 0.5A
• Voltage rating 250V
• Vertical body style
• Manufacturer's part 2001-1211/1000-411

The WAGO DIN Rail Terminal Block, Spring Cage 4.2mm 18A Grey is a 3-conductor through terminal block suitable for exe applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2001-1301
• Grey colour
• CAGE CLAMP®S Connection
• 33 x 4.2 x 59.5mm

This DIN rail through terminal blocks from WAGO has 3 conductors and is suitable for Ex e II applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Blue colour
• Current rating 18A
• Wire gauge 16AWG
• Max. conductor size 2.5mm²
• Size 33 x 4.2 x 59.5mm
• Manufacturer's part 2001-1304

The WAGO DIN Rail Terminal Block, Spring Cage 4.2mm 18A Green-Yellow a 3-conductor through terminal block suitable for exe applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2001-1307
• Green-yellow colour
• CAGE CLAMP®S Connection
• 33 x 4.2 x 59.5mm

The WAGO DIN Rail Terminal Block, Spring Cage 4.2mm Grey Circuit II is a 3-conductor diode terminal block with diode 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2001-1311/1000-410
• CAGE CLAMP®S Connection
• 33 x 4.2 x 59.5mm (H x W x D)

This spring cage 3-conductor diode terminal block with diode 1N4007 from WAGO uses the CAGE CLAMP®S connection technique which allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Colour: grey
• Size 33 x 4.2 x 59.5mm
• Current rating 0.5A
• Voltage rating 250V
• Vertical body style
• Manufacturer's part 2001-1311/1000-411

The WAGO DIN Rail Terminal Block, Spring Cage 4.2mm Grey Circuit I is a 3-conductor diode terminal block with red LED DC 24V.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2001-1321/1000-413
• CAGE CLAMP®S Connection
• 33 x 4.2 x 59.5mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 4.2mm 18A Grey is a 4-conductor through terminal block suitable for exe applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2001-1401
• Grey colour
• CAGE CLAMP®S Connection
• 33 x 4.2 x 70mm

The WAGO DIN Rail Terminal Block, Spring Cage 4.2mm 18A Blue is a 4-conductor through terminal block suitable for exe applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2001-1404
• Blue colour
• CAGE CLAMP®S Connection
• 33 x 4.2 x 70mm

The WAGO DIN Rail Terminal Block, Spring Cage 4.2mm 18A Green-Yellow is a 4-conductor through terminal block suitable for exe applications. The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2001-1407
• Green-yellow colour
• CAGE CLAMP®S Connection
• 33 x 4.2 x 70mm

The WAGO DIN Rail Terminal Block, Spring Cage 4.2mm Grey Circuit II is a 4-conductor diode terminal block with diode 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2001-1411/1000-410
• CAGE CLAMP®S Connection
• 33 x 4.2 x 70mm (H x W x D)

This spring cage 4-conductor diode terminal block with diode 1N4007 from WAGO uses the CAGE CLAMP®S connection technique which allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Colour: grey
• Size 33 x 4.2 x 70mm
• Current rating 0.5A
• Voltage rating 250V
• Vertical body style
• Manufacturer's part 2001-1411/1000-411

WAGO 2001-1441 double potential, DIN rail mount terminal block, colour - grey. Pack size 100.

• Function: L
• AWG max.: 14
• AWG min.: 22
• Colour: Grey
• Connection (components): Pull spring
• Connector type (category): Continuity
• Content: 100 pc(s)
• Dimensions, height: 32.9mm
• Dimensions, length: 4.2mm
• Dimensions, width: 4.2mm
• Manufacturer part No.: 2001-1441
• Max. cross section (flexible): 2.5mm²
• Max. cross section (inflexible): 1.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 1
• Nominal current: 18 A
• Nominal voltage: 800 V
• Number of pins: 4
• Pins per row: 4
• Rated surge voltage: 8 kV
• Type (manufacturer type): 2001-1441
• Weight: 6.143g

WAGO 2001-171 0.25 - 0.5mm² 5 insulation stop 2001 series, colour - light grey. Pack size 200.

• Colour: Light grey
• Content: 200 pc(s)
• Manufacturer part No.: 2001-171
• Type (manufacturer type): 2001-171
• Weight: 0.56g

Push-in type insulated jumper bar from WAGO, suitable for use with through terminals from the 2001 Series.

• 2-way version
• Light grey colour
• Current rating 18A
• TOPJOB® S family
• Size 18.9 x 4.1 x 7.2mm
• Manufacturer's part 2001-402

Push-in type insulated jumper bar from WAGO, suitable for use with through terminals from the 2001 Series.

• 3-way version
• Light grey colour
• Current rating 18A
• TOPJOB® S family
• Size 18.9 x 4.1 x 11.24mm
• Manufacturer's part 2001-403

Push-in type insulated jumper bar from WAGO, suitable for use with through terminals from the 2001 Series.

• 4-way version
• Light grey colour
• Current rating 18A
• TOPJOB® S family
• Size 18.9 x 4.1 x 15.46mm
• Manufacturer's part 2001-404

Push-in type insulated jumper bar from WAGO, suitable for use with through terminals from the 2001 Series.

• 5-way version
• Light grey colour
• Current rating 18A
• TOPJOB® S family
• Size 18.9 x 4.1 x 19.68mm
• Manufacturer's part 2001-405

WAGO 2001-433 2-way 1-3 insulated push-in jumper bar 2001 series, colour - light grey. Pack size 200.

• Colour: Light grey
• Content: 200 pc(s)
• Dimensions, height: 19mm
• Dimensions, length: 11.2mm
• Manufacturer part No.: 2001-433
• Type (manufacturer type): 2001-433
• Weight: 0.857g

WAGO 2001-434 2-way 1-4 insulated push-in jumper bar 2001 series, colour - light grey. Pack size 200.

• Colour: Light grey
• Content: 200 pc(s)
• Dimensions, height: 19mm
• Dimensions, length: 15.5mm
• Manufacturer part No.: 2001-434
• Type (manufacturer type): 2001-434
• Weight: 1.048g

WAGO 2001-440 2-way 1-10 insulated push-in jumper bar 2001 series, colour - light grey. Pack size 100.

• Colour: Light grey
• Content: 100 pc(s)
• Dimensions, height: 19mm
• Dimensions, length: 40.8mm
• Manufacturer part No.: 2001-440
• Type (manufacturer type): 2001-440
• Weight: 2.209g

WAGO 2001-511 modular TOPJOB®s connector for Double potential 2001 series, colour - grey. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, length: 4.2mm
• Manufacturer part No.: 2001-511
• Type (manufacturer type): 2001-511
• Weight: 3.032g

WAGO 2001-549 spacer module for double potential 2001 series, colour - grey. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, length: 4.2mm
• Manufacturer part No.: 2001-549
• Type (manufacturer type): 2001-549
• Weight: 1.06g

WAGO 2001-554 4-pole 4.2mm, DIN rail mount connector strip, colour - grey. For wire sizes AWG 22-14. Pack size 25.

• AWG max.: 14
• AWG min.: 22
• Colour: Grey
• Connection (components): Pull spring
• Connector type (category): Punch-down block
• Content: 25 pc(s)
• Dimensions, length: 16.8mm
• Dimensions, width: 4.2mm
• Manufacturer part No.: 2001-554
• Max. cross section (flexible): 2.5mm²
• Max. cross section (inflexible): 1.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 4
• Nominal current: 18 A
• Nominal voltage: 500 V
• Number of pins: 4
• Pins per row: 1
• Rated surge voltage: 6 kV
• Type (manufacturer type): 2001-554
• Weight: 8.608g

WAGO 2001-557 7-pole 4.2mm, DIN rail mount connector strip, colour - grey. For wire sizes AWG 22-14. Pack size 10.

• AWG max.: 14
• AWG min.: 22
• Colour: Grey
• Connection (components): Pull spring
• Connector type (category): Punch-down block
• Content: 10 pc(s)
• Dimensions, length: 29.4mm
• Dimensions, width: 4.2mm
• Manufacturer part No.: 2001-557
• Max. cross section (flexible): 2.5mm²
• Max. cross section (inflexible): 1.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 7
• Nominal current: 18 A
• Nominal voltage: 500 V
• Number of pins: 7
• Pins per row: 1
• Rated surge voltage: 6 kV
• Type (manufacturer type): 2001-557
• Weight: 15.064g

High voltage warning markers from WAGO, suitable for use with DIN rail connectors from the 2002 series.

• Colour: Yellow with black markings
• Capacity: 5 terminal blocks
• Manufacturer's part 2002-115

WAGO 2002-116 multi-purpose operating tool for 2002 series component plugs, colour -. Pack size 5.

• Content: 5 pc(s)
• Manufacturer part No.: 2002-116
• Type (manufacturer type): 2002-116
• Weight: 1.09g

DIN rail-mounting through terminal block with spring cage from WAGO, suitable for Ex e II applications. CAGE CLAMP® connection allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, this terminal blocks is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Colour: grey
• 2 conductors
• Current rating 24A
• Wire gauge 14AWG
• Maximum conductor size 4mm²
• Size 33 x 5.2 x 48.5mm
• TOPJOB® S family
• Manufacturer's part 2002-1201

DIN rail-mounting through terminal block with spring cage from WAGO, suitable for Ex e II applications. CAGE CLAMP® connection allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, this terminal blocks is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Colour: blue
• 2 conductors
• Current rating 24A
• Wire gauge 14AWG
• Maximum conductor size 4mm²
• Size 33 x 5.2 x 48.5mm
• TOPJOB® S family
• Manufacturer's part 2002-1204

The WAGO DIN Rail Terminal Block, Spring Cage Green-Yellow 5.2mm 24A is a 2-conductor through terminal block suitable for exe applications. This earth-wire terminal enables a simple plugging of one-wired and flexible conductors equipped with crimped wire-end sleeves.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1207
• CAGE CLAMP®S Connection
• Green-yellow colour
• 33 x 5.2 x 48.5mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit II is a 2-conductor diode terminal block with diode 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1211/1000-410
• CAGE CLAMP®S Connection
• 33 x 5.2 x 48.5mm (H x W x D)

A 2-conductor diode terminal block from the WAGO TOP JOB® family with diode 1N4007.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Height 32.9mm
• Depth 48.5mm
• Width 5.2mm
• Manufacturer's part 2002-1211/1000-411

This orange end and intermediate plate from WAGO is 0.8mm thick and suitable for use with 3-wire TOPJOB S rail-mounted terminal blocks.

• Orange colour
• Height 28.4mm
• Depth 48.5mm
• Manufacturer's part 2002-1292