WAGO 2002-1294 2mm separator for 2001-1200 series.

• Colour: Orange
• Height: 33.4mm
• Length: 2mm
• Manufacturer's part 2002-1294

DIN rail-mounting through terminal block with spring cage from WAGO, suitable for Ex e II applications. CAGE CLAMP® connection allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, this terminal blocks is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Colour: grey
• 3 conductors
• Current rating 24A
• Wire gauge 14AWG
• Maximum conductor size 4mm²
• Size 33 x 5.2 x 59.5mm
• TOPJOB® S family
• Manufacturer's part 2002-1301

The WAGO DIN Rail Terminal Block, Spring Cage Blue 5.2mm 24A is a 3-conductor through terminal block suitable for exe applications. This earth-wire terminal enables a simple plugging of one-wired and flexible conductors equipped with crimped wire-end sleeves.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1304
• CAGE CLAMP®S Connection
• Blue colour
• 33 x 5.2 x 59.5mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage Green-Yellow 5.2mm 24A is a 3-conductor through terminal block suitable for exe applications. This earth-wire terminal enables a simple plugging of one-wired and flexible conductors equipped with crimped wire-end sleeves.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1307
• CAGE CLAMP®S Connection
• Green-yellow colour
• 33 x 5.2 x 59.5mm (H x W x D)

Triple deck marker carrier from WAGO, suitable for use with DIN rail connectors from the 2002 series.

• Colour: Grey
• Manufacturer's part 2002-131

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit II is a 3-conductor diode terminal block with diode 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1311/1000-410
• CAGE CLAMP®S Connection
• 33 x 5.2 x 59.5mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit II is a 3-conductor LED terminal block with red LED DC 24V.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1321/1000-413
• CAGE CLAMP®S Connection
• 33 x 5.2 x 59.5mm (H x W x D)

This orange end and intermediate plate from WAGO is 0.8mm thick and suitable for use with 3-wire TOPJOB S rail-mounted terminal blocks.

• Orange colour
• Height 28.4mm
• Depth 59.5mm
• Manufacturer's part 2002-1392

DIN rail-mounting through terminal block with spring cage from WAGO, suitable for Ex e II applications. CAGE CLAMP® connection allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, this terminal blocks is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Colour: grey
• 4 conductors
• Current rating 24A
• Wire gauge 14AWG
• Maximum conductor size 4mm²
• Size 33 x 5.2 x 70mm
• TOPJOB® S family
• Manufacturer's part 2002-1401

DIN rail-mounting through terminal block with spring cage from WAGO, suitable for Ex e II applications. CAGE CLAMP® connection allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, this terminal blocks is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Colour: blue
• 4 conductors
• Current rating 24A
• Wire gauge 14AWG
• Maximum conductor size 4mm²
• Size 33 x 5.2 x 70mm
• TOPJOB® S family
• Manufacturer's part 2002-1404

DIN rail-mounting through terminal block with spring cage from WAGO, suitable for Ex e II applications. CAGE CLAMP® connection allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, this terminal blocks is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Colour: green/yellow
• 4 conductors
• Current rating 24A
• Wire gauge 14AWG
• Maximum conductor size 4mm²
• Size 33 x 5.2 x 70mm
• TOPJOB® S family
• Manufacturer's part 2002-1407

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit II is a 4-conductor diode terminal block with diode 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1411/1000-410
• CAGE CLAMP®S Connection
• 33 x 5.2 x 70mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit I is a 4-conductor diode terminal block with diode 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1411/1000-411
• CAGE CLAMP®S Connection
• 33 x 5.2 x 70mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit I is a 4-conductor LED terminal block with red LED DC 24V.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1421/1000-434
• CAGE CLAMP®S Connection
• 33 x 5.2 x 70mm (H x W x D)

WAGO 2002-1441 double potential, DIN rail mount terminal block, colour - grey. For wire sizes mm² 4. Pack size 100.

• Function: L
• AWG max.: 12
• AWG min.: 22
• Colour: Grey
• Connection (components): Pull spring
• Connector type (category): Continuity
• Content: 100 pc(s)
• Dimensions, height: 32.9mm
• Dimensions, length: 5.2mm
• Dimensions, width: 5.2mm
• Manufacturer part No.: 2002-1441
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 1
• Nominal current: 24 A
• Nominal voltage: 800 V
• Number of pins: 4
• Pins per row: 4
• Rated surge voltage: 8 kV
• Type (manufacturer type): 2002-1441
• Weight: 7.807g

WAGO 2002-1491 0.8mm end and intermediate plate for 2001-1400 series, colour - grey. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, height: 32.9mm
• Dimensions, length: 0.8mm
• Manufacturer part No.: 2002-1491
• Type (manufacturer type): 2002-1491
• Weight: 1.63g

This orange end and intermediate plate from WAGO is 0.8mm thick and suitable for use with 4-wire TOPJOB S rail-mounted terminal blocks.

• Orange colour
• Height 28.4mm
• Depth 70mm
• Manufacturer's part 2002-1492

The WAGO Rail Terminal Block, Spring Cage 5.2mm 16A Grey is a 2-conductor through terminal block with testing facility and the same profile (contours) as the 2-conductor disconnect terminal block, with movable knife.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1601
• With testability
• Cutter holder orange
• CAGE CLAMP®S Connection
• Front entry wiring
• TOPJOB®S

The WAGO Rail Terminal Block, Spring Cage 5.2mm 16A Blue is a 2-conductor through terminal block with testing facility and the same profile (contours) as the 2-conductor disconnect terminal block, with movable knife.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1604
• With testability
• Cutter holder orange
• CAGE CLAMP®S Connection
• Front entry wiring
• TOPJOB®S

WAGO 2002-161 5mm marker carrier for jumper slots 2002 series, colour - grey. Pack size 1.

• Colour: Grey
• Content: 1 pc(s)
• Manufacturer part No.: 2002-161
• Type (manufacturer type): 2002-161

A 2-conductor fuse disconnect terminal block with pivoting fuse holder from the WAGO TOP JOB® family, suitable for 5 x 20mm miniature fuses.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Without blown fuse indication
• Grey colour
• Front-entry wiring
• Height 57.2mm
• Depth 66.1mm
• Width 5.2mm
• Manufacturer's part 2002-1611

A 2-conductor carrier terminal block from the WAGO TOP JOB® family, suitable for modules and plugs.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Grey colour
• Front-entry wiring
• Height 32.9mm
• Depth 66.1mm
• Width 5.2mm
• Manufacturer's part 2002-1661

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm 16A Grey is a 2-conductor isolating and test terminal with testing facility disconnect blade support.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-1671
• With testability
• Cutter holder orange
• CAGE CLAMP®S Connection
• Front entry wiring

A 2-conductor fuse terminal block with test option from the WAGO TOP JOB® family, suitable for flat blade-style fuses according to DIN 72581-3F.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Grey colour
• Front-entry wiring
• Height 32.9mm
• Depth 66.1mm
• Width 5.2mm
• Manufacturer's part 2002-1681

This orange end and intermediate plate from WAGO is 1mm thick and suitable for use with 2-conductor TOPJOB S fuse blocks.

• Orange colour
• Height 30.4mm
• Depth 66.1mm
• Manufacturer's part 2002-1692

WAGO 2002-171 0.25-0.5mm² insulation stop for 2002 series, colour - light grey. Pack size 200.

• Colour: Light grey
• Content: 200 pc(s)
• Manufacturer part No.: 2002-171
• Type (manufacturer type): 2002-171
• Weight: 0.626g

WAGO 2002-172 0.75-1mm² insulation stop for 2002 series, colour - dark grey. Pack size 200.

• Colour: Dark grey
• Content: 200 pc(s)
• Manufacturer part No.: 2002-172
• Type (manufacturer type): 2002-172
• Weight: 0.6g

The WAGO DIN Rail Through Terminal Block, Spring Cage 5.2mm 16A Grey is a 4-conductor through terminal block with testing facility. Contour comparison with 4-conductor-disconnect terminal. With moving cutting knife.The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° allowing easier installation in smaller spaces.

• 2002-1801
• Grey colour
• CAGE CLAMP®S Connection
• 33 x 5.2 x 87.5mm (H x W x D)
• Front-entry wiring

The WAGO DIN Rail Through Terminal Block, Spring Cage 5.2mm 16A Orange is a 4-conductor through terminal block with testing facility. Contour comparison with 4-conductor-disconnect terminal. With moving cutting knife.The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° allowing easier installation in smaller spaces.

• 2002-1802
• Orange colour
• CAGE CLAMP®S Connection
• 33 x 5.2 x 87.5mm (H x W x D)
• Front-entry wiring

A 4-conductor fuse disconnect terminal block with pivoting fuse holder from the WAGO TOP JOB® family, suitable for 5 x 20mm miniature fuses.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Without blown fuse indication
• Grey colour
• Front-entry wiring
• Height 57.2mm
• Depth 87.5mm
• Width 6.2mm
• Manufacturer's part 2002-1811

A 4-conductor carrier terminal block from the WAGO TOP JOB® family.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Grey colour
• Front-entry wiring
• Height 32.9mm
• Depth 87.5mm
• Width 5.2mm
• Manufacturer's part 2002-1861

The WAGO DIN Rail Disconnecting Terminal Block, Spring Cage 5.2mm 16A Grey is a 4-conductor isolating and test terminal with testing facility.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° allowing easier installation in smaller spaces.

• 2002-1871
• Grey colour
• CAGE CLAMP®S Connection
• 33 x 5.2 x 87.5mm (H x W x D)
• Front-entry wiring

A 4-conductor disconnect terminal block with testing facility from the WAGO TOP JOB® family.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Orange colour
• Front-entry wiring
• Height 32.9mm
• Depth 87.5mm
• Width 5.2mm
• Manufacturer's part 2002-1872

A 4-conductor disconnect terminal block from the WAGO TOP JOB® family.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Blue colour
• Front-entry wiring
• Height 32.9mm
• Depth 87.5mm
• Width 5.2mm
• Manufacturer's part 2002-1874

A 4-conductor fuse terminal block with test option from the WAGO TOP JOB® family, suitable for flat blade-style fuses according to DIN 72581-3F.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Grey colour
• Front-entry wiring
• Height 32.9mm
• Depth 87.5mm
• Width 5.2mm
• Manufacturer's part 2002-1881

WAGO 2002-191 lockout cap for 2002 series, colour - grey. Pack size 25.

• Colour: Grey
• Content: 25 pc(s)
• Manufacturer part No.: 2002-191
• Type (manufacturer type): 2002-191
• Weight: 0.08g

WAGO 2002-192 lockout cap for 2002 series, colour - orange. Pack size 25.

• Colour: Orange
• Content: 25 pc(s)
• Manufacturer part No.: 2002-192
• Type (manufacturer type): 2002-192
• Weight: 0.08g

WAGO 2002-1981 Test Point Blade Fuse 2 conductor, DIN rail mount terminal block, colour - grey. For wire sizes AWG 22-12. Pack size 50.

• AWG max.: 12
• AWG min.: 22
• Colour: Grey
• Connection (components): Pull spring
• Connector type (category): Fuse Terminal
• Content: 50 pc(s)
• Dimensions, height: 32.9mm
• Dimensions, length: 5.2mm
• Dimensions, width: 5.2mm
• Manufacturer part No.: 2002-1981
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 1
• Nominal current: 10 A
• Nominal voltage: 400 V
• Number of pins: 2
• Pins per row: 2
• Rated surge voltage: 6 kV
• Type (manufacturer type): 2002-1981
• Weight: 7.936g

WAGO 2002-1981/1000-413 Test Point Circuit 1 Blade Fuse LED 24V 2 conductor, DIN rail mount terminal block, colour - grey. For wire sizes AWG 22-12. Pack size 50.

• AWG max.: 12
• AWG min.: 22
• Colour: Grey
• Connection (components): Pull spring
• Connector features: + red LED
• Connector type (category): Fuse Terminal
• Content: 50 pc(s)
• Dimensions, height: 32.9mm
• Dimensions, length: 5.2mm
• Dimensions, width: 5.2mm
• Manufacturer part No.: 2002-1981/1000-413
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 1
• Nominal current: 10 A
• Nominal voltage: 400 V
• Number of pins: 2
• Pins per row: 2
• Rated surge voltage: 6 kV
• Type (manufacturer type): 2002-1981/1000-413
• Weight: 9.517g

WAGO 2002-1981/1000-429 Test Point Circuit 1 Blade Fuse LED 12V 2 conductor, DIN rail mount terminal block, colour - grey. For wire sizes AWG 22-12. Pack size 50.

• AWG max.: 12
• AWG min.: 22
• Colour: Grey
• Connection (components): Pull spring
• Connector features: + red LED
• Connector type (category): Fuse Terminal
• Content: 50 pc(s)
• Dimensions, height: 32.9mm
• Dimensions, length: 5.2mm
• Dimensions, width: 5.2mm
• Manufacturer part No.: 2002-1981/1000-429
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 1
• Nominal current: 10 A
• Nominal voltage: 400 V
• Number of pins: 2
• Pins per row: 2
• Rated surge voltage: 6 kV
• Type (manufacturer type): 2002-1981/1000-429
• Weight: 9.527g

WAGO 2002-1981/1000-434 Test Point Circuit 2 Blade Fuse LED 24V 2 conductor, DIN rail mount terminal block, colour - grey. For wire sizes AWG 22-12. Pack size 50.

• AWG max.: 12
• AWG min.: 22
• Colour: Grey
• Connection (components): Pull spring
• Connector features: + red LED
• Connector type (category): Fuse Terminal
• Content: 50 pc(s)
• Dimensions, height: 32.9mm
• Dimensions, length: 5.2mm
• Dimensions, width: 5.2mm
• Manufacturer part No.: 2002-1981/1000-434
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 1
• Nominal current: 10 A
• Nominal voltage: 400 V
• Number of pins: 2
• Pins per row: 2
• Rated surge voltage: 6 kV
• Type (manufacturer type): 2002-1981/1000-434
• Weight: 9.517g

WAGO 2002-1981/1000-435 Test Point Circuit 2 Blade Fuse LED 48V 2 conductor, DIN rail mount terminal block, colour - grey. For wire sizes AWG 22-12. Pack size 50.

• AWG max.: 12
• AWG min.: 22
• Colour: Grey
• Connection (components): Pull spring
• Connector features: + red LED
• Connector type (category): Fuse Terminal
• Content: 50 pc(s)
• Dimensions, height: 32.9mm
• Dimensions, length: 5.2mm
• Dimensions, width: 5.2mm
• Manufacturer part No.: 2002-1981/1000-435
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 1
• Nominal current: 10 A
• Nominal voltage: 400 V
• Number of pins: 2
• Pins per row: 2
• Rated surge voltage: 6 kV
• Type (manufacturer type): 2002-1981/1000-435
• Weight: 9.517g

This grey end and intermediate plate from WAGO is 1mm thick and suitable for use with terminal blocks from the 2002 series.

• Grey colour
• Height 32.9mm
• Depth 72.9mm
• Manufacturer's part 2002-1991

This double deck through/through L/L terminal block from WAGO, without marker carrier, is suitable for Ex e II applications. It uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Grey colour
• Height 51.7mm
• Depth 69.7mm
• Width 5.2mm
• Manufacturer's part 2002-2201

The WAGO DIN Rail Terminal Block, Multi-Level L/N 5.2mm 24A Grey is a double deck terminal block, through/through L/N without marker carrier housing. Suitable for exe Applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-2203
• Grey colour
• CAGE CLAMP®S Connection
• 52 x 5.2 x 70mm (H x W x D)

The WAGO DIN Rail Terminal Block, Multi-Level N/N 5.2mm 24A Blue is a double deck terminal block, through/through N/N without marker carrier housing. Suitable for exe Applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-2204
• Blue colour
• CAGE CLAMP®S Connection
• 52 x 5.2 x 70mm (H x W x D)

The WAGO Din Rail Terminal Block, Multi Level 5.2mm, Green-Yellow is a double deck terminal block, 4-conductor ground PE without marker carrier. Internal commoning suitable for exe applications.

• 2002-2207
• Green-Yellow colour
• CAGE CLAMP®S Connection
• 52 x 5.2 x 70mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit I is a double deck diode terminal block with diode 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-2211/1000-410
• CAGE CLAMP®S Connection
• 52 x 5.2 x 70mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit II is a double deck diode terminal block with 2 diodes 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-2213/1000-488
• CAGE CLAMP®S Connection
• 52 x 5.2 x 70mm (H x W x D)

A double deck terminal block with 2 diodes from the WAGO TOP JOB® family.

• Grey colour
• Height 52mm
• Depth 70mm
• Width 5.2mm
• Wire size AWG 22 to 12
• Manufacturer's part 2002-2214/1000-489