The WAGO DIN Rail Termnal Block 36A Grey is a multi-level installation terminal with N-disconnect slide kink L/L/PE. Connection of both solid and flexible conductors with wire-end sleeve via direct connection technique. Through identical bus bar position, the compatibility is guaranteed with the previous installation clamps.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2005-7645
• Grey
• CAGE CLAMP® connection
• 42 x 6.2 x 124mm (H x W x D)

The WAGO DIN Rail Termnal Block 36A Grey is a multi-level installation terminal with N-disconnect slide kink N/L/PE. Connection of both solid and flexible conductors with wire-end sleeve via direct connection technique. Through identical bus bar position, the compatibility is guaranteed with the previous installation clamps.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2005-7646
• Grey
• CAGE CLAMP® connection
• 42 x 6.2 x 124mm (H x W x D)

The WAGO Cover Plate is an end and intermediate plate with 1mm thickness, suitable for Series 2005 (TOPJOBS).

• 2005-7692
• 41.65 x 1 x 123.9mm (H x W x D)
• Orange colour

Protective high voltage warning marker from WAGO suitable for terminal blocks from the 2006 series.

• Suitable for 5 terminal blocks
• Colour: Yellow
• Manufacturer's part 2006-115

The WAGO DIN Rail Terminal Block, Spring Cage 7.5mm 41A Grey is a 2-conductor through terminal block suitable for exe applications. The Series 2006 enables a simple plugging of one-wired and flexible conductors equipped with crimped wire-end sleeves.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Grey colour
• CAGE CLAMP®S Connection
• Dimensions (H x W x D) 33 x 7.5 x 57.5mm
• Manufacturer's part 2006-1201

A 2-conductor through terminal block from the WAGO 2006 series, suitable for Ex i and EX e II applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Blue colour
• Front-entry wiring
• Wire size 20 to 8 AWG
• Height 32.9mm
• Depth 57.5mm
• Width 7.5mm
• Manufacturer's part 2006-1204

The WAGO DIN Rail Terminal Block, Spring Cage 7.5mm 41A Green-Yellow is a 2-conductor through terminal block suitable for exe applications. The Series 2006 enables a simple plugging of one-wired and flexible conductors equipped with crimped wire-end sleeves.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Green/yellow colour
• CAGE CLAMP®S Connection
• Dimensions (H x W x D) 33 x 7.5 x 57.5mm
• Manufacturer's part 2006-1207

Orange 1mm end and intermediate plate from WAGO suitable for use with the 2006-1200 series.

• Height 32.9mm
• Depth 57.5mm
• Manufacturer's part 2006-1292

The WAGO DIN Rail Terminal Block, Spring Cage 7.5mm 41A Grey is a 3-conductor through terminal block suitable for exe applications. The Series 2006 enables a simple plugging of one-wired and flexible conductors equipped with crimped wire-end sleeves.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Grey colour
• CAGE CLAMP®S Connection
• Dimensions (H x W x D) 33 x 7.5 x 57.5mm
• Manufacturer's part 2006-1301

A 3-conductor through terminal block from the WAGO 2006 series, suitable for Ex i and EX e II applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Blue colour
• Front-entry wiring
• Wire size 20 to 8 AWG
• Height 32.9mm
• Depth 73.5mm
• Width 7.5mm
• Manufacturer's part 2006-1304

The WAGO DIN Rail Terminal Block, Spring Cage 7.5mm 41A Green-Yellow is a 3-conductor through terminal block suitable for exe applications. The Series 2006 enables a simple plugging of one-wired and flexible conductors equipped with crimped wire-end sleeves.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Green/yellow colour
• CAGE CLAMP®S Connection
• Dimensions (H x W x D) 33 x 7.5 x 57.5mm
• Manufacturer's part 2006-1307

Orange 1mm end and intermediate plate from WAGO suitable for use with the 2006-1300 series.

• Height 32.9mm
• Depth 73.5mm
• Manufacturer's part 2006-1392

A 2-conductor fused disconnect terminal block from the WAGO 2006 series with pivoting fuse holder for miniature metric fuses.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Fuse size 5 x 20mm
• Without blown fuse indication
• Grey colour
• Front-entry wiring
• Height 59mm
• Depth 96.3mm
• Width 7.5mm
• Manufacturer's part 2006-1611

A 2-conductor fused disconnect terminal block from the WAGO 2006 series with pivoting fuse holder for miniature metric fuses.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Fuse size 5 x 30mm
• Without blown fuse indication
• Grey colour
• Front-entry wiring
• Height 59mm
• Depth 96.3mm
• Width 7.5mm
• Manufacturer's part 2006-1621

The WAGO DIN Rail Terminal Block, Spring Cage 7.5mm 10A Grey is a 2-conductor fused disconnect terminal block with pivoting fuse holder for miniature fuses, ¼" x 1¼", without blown fuse indication.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2006-1631
• Grey colour
• CAGE CLAMP®S Connection
• 59 x 7.5 x 96.3mm (H x W x D)
• Front-entry wiring

A 2-conductor carrier terminal block from the WAGO 2006 series.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Function: L
• Wire size 20 to 8 AWG
• Grey colour
• Front-entry wiring
• Height 32.9mm
• Depth 96.3mm
• Width 7.5mm
• Nominal current: 30A
• Nominal voltage: 800V
• Manufacturer's part 2006-1661

The WAGO DIN Rail Disconnecting Terminal Block, Spring Cage 7.5mm 30A Grey is a 2-conductor disconnect terminal block with testing facility. Cutting knife holder orange.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2006-1671
• Grey colour
• CAGE CLAMP®S Connection
• 37 x 7.5 x 96.3mm (H x W x D)
• Front-entry wiring

A 24V ground conductor disconnect terminal block with testing facility from the WAGO 2006 series.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Wire size 20 to 8 AWG
• Grey colour
• Orange disconnect link
• Front-entry wiring
• Height 36.8mm
• Depth 96.3mm
• Width 15mm
• Nominal current: 30A
• Nominal voltage: 500V
• Manufacturer's part 2006-1671/1000-848

The WAGO DIN Rail Terminal Block, Spring Cage 15mm 230V AC/DC is a ground conductor disconnect terminal block with testing facility. Cutter holder orange, grey.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2006-1671/1000-851
• Grey colour
• CAGE CLAMP®S Connection
• 37 x 15 x 96.3mm (H x W x D)
• Front-entry wiring

A 2-conductor fused terminal block with testing facility from the WAGO 2006 series suitable for mini automotive blade-style fuses.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Without blown fuse indication
• Wire size 20 to 8 AWG
• Grey colour
• Front-entry wiring
• Height 32.9mm
• Depth 96.3mm
• Width 7.5mm
• Nominal current: 25A
• Nominal voltage: 500V
• Manufacturer's part 2006-1681

A 24V 2-conductor fuse terminal block with test option from WAGO suitable for mini-automotive blade-style fuses.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Blown fuse indication by LED
• Current rating 25A
• Colour: grey
• Number of connection points 2
• Number of potentials 2
• Height above DIN-35 rail 32.9mm
• Width 7.5mm
• Depth 96.3mm
• Manufacturer's part 2006-1681/1000-413

A 12V 2-conductor fuse terminal block with test option from WAGO suitable for mini-automotive blade-style fuses.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Blown fuse indication by LED
• Current rating 25A
• Colour: grey
• Number of connection points 2
• Number of potentials 2
• Height above DIN-35 rail 32.9mm
• Width 7.5mm
• Depth 96.3mm
• Manufacturer's part 2006-1681/1000-429

A 2-conductor 24V fuse terminal block with test option from WAGO suitable for mini-automotive blade-style fuses.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Blown fuse indication by LED
• Current rating 25A
• Colour: grey
• Number of connection points 2
• Number of potentials 2
• Height above DIN-35 rail 32.9mm
• Width 7.5mm
• Depth 96.3mm
• Manufacturer's part 2006-1681/1000-434

A 12V 2-conductor fuse terminal block with test option from WAGO suitable for mini-automotive blade-style fuses.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Blown fuse indication by LED
• Current rating 25A
• Colour: grey
• Number of connection points 2
• Number of potentials 2
• Height above DIN-35 rail 32.9mm
• Width 7.5mm
• Depth 96.3mm
• Manufacturer's part 2006-1681/1000-449

Orange 1mm end and intermediate plate from WAGO suitable for use with the 2006 series.

• Height 30.4mm
• Depth 96.3mm
• Manufacturer's part 2006-1692

WAGO 2006-191 lockout cap for 2006 series, colour - grey. For wire sizes. Pack size 1.

• Additional product details: VERSCHLUSSKAPPE F. LEITEREINF. Grey
• Content: 1 pc(s)
• Manufacturer part No.: 2006-191
• Type (manufacturer type): VERSCHLUSSKAPPE F. LEITEREINF. GREY

WAGO 2006-401 30A disconnect plug for carrier terminal blocks for 2006 series, colour - orange. For wire sizes. Pack size 1.

• Additional product details: Breaker Plug for Base Terminal N
• Content: 1 pc(s)
• Manufacturer part No.: 2006-401
• Type (manufacturer type): Breaker Plug for Base Terminal N

Insulated push-in type jumper bar with 2 ways from WAGO, suitable for use with TOP JOB® connectors from the 2006 series.

The WAGO 3-Way Fanning Strip Bridge for Series 2006 is a push-in type jumper bar that is insulated - 5-pole, nominal current 41A.

• 2006-403
• Light Grey
• 18.9 x 4.1 x 35.28mm (H x W x D)

Insulated push-in type jumper bar with 4 ways from WAGO, suitable for use with TOP JOB® connectors from the 2006 series.

The WAGO 5-Way Fanning Strip Bridge for Series 2006 is a push-in type jumper bar that is insulated - 5-pole, nominal current 41A.

• 2006-405
• Light Grey
• 18.9 x 4.1 x 35.28mm (H x W x D)

Insulated push-in type jumper bar with 2 ways (1 to 5) from WAGO, suitable for use with TOP JOB® connectors from the 2006 series.

WAGO 2006-499 32A insulated step down jumper for 2006 series, colour - light grey. For wire sizes. Pack size 50.

• Colour: Light grey
• Content: 50 pc(s)
• Manufacturer part No.: 2006-499
• Type (manufacturer type): 2006-499
• Weight: 1.608g

WAGO 2006-511 1-pole, DIN rail mount connector, colour - grey. For wire sizes AWG 20-10. Pack size 50.

• AWG max.: 10
• AWG min.: 20
• Colour: Grey
• Connection (components): Pull spring
• Connector type (category): Punch-down block
• Content: 50 pc(s)
• Dimensions, height: 46mm
• Dimensions, length: 7.5mm
• Dimensions, width: 7.5mm
• Manufacturer part No.: 2006-511
• Max. cross section (flexible): 6mm²
• Max. cross section (inflexible): 4mm²
• Min. cross section (flexible): 0.5mm²
• Min. cross section (unflexible): 0.5mm²
• No. of rows: 1
• Nominal current: 32 A
• Nominal voltage: 500 V
• Number of pins: 1
• Pins per row: 1
• Rated surge voltage: 6 kV
• Type (manufacturer type): 2006-511
• Weight: 4.325g

WAGO 2006-549 Modular TOPJOB®S Connector 7.5mm spacer module for 2004/2006/2010/2016 series, colour - grey. For wire sizes. Pack size 50.

• Colour: Grey
• Content: 50 pc(s)
• Dimensions, length: 7.5mm
• Dimensions, width: 7.5mm
• Manufacturer part No.: 2006-549
• Max. cross section (flexible): 6mm²
• Max. cross section (inflexible): 4mm²
• Min. cross section (flexible): 0.5mm²
• Min. cross section (unflexible): 0.5mm²
• Nominal current: 32 A
• Type (manufacturer type): 2006-549
• Weight: 1.83g

Orange 1mm end and intermediate plate from WAGO suitable for use with 2002/2006/2016-7100 series.

• Height 38mm
• Depth 60mm
• Manufacturer's part 2006-7192

WAGO 2006-7300 snap-in lockout for 2002/2006/2016-7100 series, colour - orange. For wire sizes. Pack size 100.

• Colour: Orange
• Content: 100 pc(s)
• Manufacturer part No.: 2006-7300
• Type (manufacturer type): 2006-7300
• Weight: 0.65g

WAGO 2006-8401 disconnect plug for carrier terminal blocks, colour - orange. For wire sizes. Pack size 1.

• Additional product details: TOPJOB S TRENNST. F. BASISKL. ORANGE
• Colour: Orange
• Content: 1 pc(s)
• Manufacturer part No.: 2006-8401
• Type (manufacturer type): TOPJOB S TRENNST. F. BASISKL. ORANGE

WAGO 2006-8601 Test Point 2 conductor Through, DIN rail mount terminal block, colour - grey. For wire sizes AWG 20-8. Pack size 1.

• Function: L
• AWG max.: 10
• AWG min.: 20
• Additional product details: TOPJOB S 2-L-Continuity Terminal Grey
• Colour: Grey
• Connection (components): Pull spring
• Connector features: + test option
• Connector type (category): Continuity
• Content: 1 pc(s)
• Dimensions, width: 8mm
• Manufacturer part No.: 2006-8601
• Max. cross section (flexible): 6mm²
• Max. cross section (inflexible): 10mm²
• Min. cross section (flexible): 0.5mm²
• Min. cross section (unflexible): 0.5mm²
• No. of rows: 1
• Nominal current: 30 A
• Number of pins: 2
• Pins per row: 2
• Type (manufacturer type): TOPJOB S 2-L-Continuity Terminal GREY

WAGO 2006-8661 Test Point 2 conductor Through, DIN rail mount terminal block, colour - grey. For wire sizes AWG 20-8. Pack size 1.

• Function: L
• AWG max.: 10
• AWG min.: 20
• Additional product details: TOPJOB S 2-L-Base Terminal Grey
• Colour: Grey
• Connection (components): Pull spring
• Connector features: + test option
• Connector type (category): Base Terminal
• Content: 1 pc(s)
• Dimensions, width: 8mm
• Manufacturer part No.: 2006-8661
• Max. cross section (flexible): 6mm²
• Max. cross section (inflexible): 10mm²
• Min. cross section (flexible): 0.5mm²
• Min. cross section (unflexible): 0.5mm²
• No. of rows: 1
• Nominal current: 30 A
• Number of pins: 2
• Pins per row: 2
• Type (manufacturer type): TOPJOB S 2-L-Base Terminal GREY

A 2-conductor disconnect terminal block with testing facility from the WAGO 2006 series.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal blocks and have a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Function: L
• Wire size 20 to 8 AWG
• Grey colour
• Front-entry wiring
• Height 33mm
• Depth 106.9mm
• Width 15mm
• Nominal current: 30A
• Nominal voltage: 1000V
• Manufacturer's part 2006-8671

Orange 2mm end plate from WAGO suitable for use with fuse terminal blocks from the 2006 series.

• Height 59mm
• Depth 95.8mm
• Manufacturer's part 2006-992

Insulated adjacent jumper for switching lever with 2 ways from WAGO.

• Colour: orange
• Nominal current 30A
• Manufacturer's part 2007-8442

WAGO 2007-8444 4-way 30A insulated adjacent jumper for switch lever for 2006 series, colour - orange. For wire sizes. Pack size 1.

• Additional product details: TOPJOB S Jumper 4-F. ORANGE
• Colour: Orange
• Content: 1 pc(s)
• Manufacturer part No.: 2007-8444
• Type (manufacturer type): TOPJOB S Jumper 4-F. ORANGE

WAGO 2007-8446 6-way 30A insulated adjacent jumper for switch lever for 2006 series, colour - orange. For wire sizes. Pack size 1.

• Additional product details: TOPJOB S Jumper 6-F. ORANGE
• Colour: Orange
• Content: 1 pc(s)
• Manufacturer part No.: 2007-8446
• Type (manufacturer type): TOPJOB S Jumper 6-F. ORANGE

Test Point 2-conductor through disconnect DIN rail mount terminal block from WAGO.

• Function: L
• AWG max.: 10
• AWG min.: 20
• Colour: Grey
• Connection (components): Pull spring
• Connector features: + test option
• Connector type: N Terminal
• Width: 8mm
• Max. cross section (flexible): 6mm²
• Max. cross section (inflexible): 10mm²
• Min. cross section (flexible): 0.5mm²
• Min. cross section (unflexible): 0.5mm²
• No. of rows: 1
• Nominal current: 30A
• Pins per row: 2
• Manufacturer's part 2007-8821

WAGO 2007-8894 2mm end and separator plate for 2006 series disconnect terminal blocks.

• Colour: Orange
• Manufacturer's part 2007-8894

WAGO 2007-8899 2mm lockout for 2006 series.

• Colour: Yellow
• Manufacturer's part 2007-8899

WAGO 2009-100 1m labelling strips.

• Colour: White
• Length: 1m
• Manufacturer's part: 2009-100

Adaptor from the WAGO 2009 series for 4mm Ø test plugs and for testing TOBJOB®S rail-mounted terminal blocks.

• Grey colour
• Height 48.6mm
• Width 10.15mm
• Depth 7.2mm
• Manufacturer's part 2009-174