WAGO 210-334/762-202 Self-adhesive Marking Strips , for male & female connectors, MCS with 7.62mm pin spacing. Marked "1-16" (100ea.), 48 strips per card. For male & female connectors, mcs with 7.62mm pin spacing. White

• Manufacturers part no. 210-334/762-202
• Colour White
• Content 1pc
• Width 5mm
• Weight 12.3g

WAGO 210-335 Self-adhesive Marking Strips . Marked Plain, 25 strips per card. White

• Manufacturers part no. 210-335
• Colour White
• Content 1pc
• Length 182mm
• Width 9mm
• Weight 12.3g

WAGO 210-345 Self-adhesive Label , for self-marking. White

• Manufacturers part no. 210-345
• Colour White
• Content 1pc
• Weight 12.4g

WAGO 210-504 Steel Carrier Rail , slotted. Complies with EN60715. Galvanized

Colour Galvanized
• Length 2m
• Width 35mm
• Height 7.5mm
• Weight 635g
• Manufacturer's part 210-504

WAGO 210-505 Steel Carrier Rail , unslotted. Complies with EN60715. Galvanized

• Manufacturers part no. 210-505
• Colour Galvanized
• Content 1pc
• Length 2m
• Width 35mm
• Height 7.5mm
• Weight 699g

WAGO 210-508 Steel Carrier Rail , slotted. Complies with EN60717.

• Galvanised
• Content 1pc
• Length 2m
• Width 35mm
• Height 15mm
• Weight 1245g
• Manufacturer's part 210-508

WAGO 210-549 Spare Knurled Nut , for cover.

• Manufacturers part no. 210-549
• Content 100pcs
• Weight 0.657g

WAGO 210-612 Wfb Continuous Marking Strip , for self-marking. E.g., with fiber-tip pen. Transparent

• Manufacturers part no. 210-612
• Colour Transparent
• Content 10pcs
• Length 1m
• Weight 22.09g

This operating tool from WAGO has a partially insulated angled shaft and is suitable for use with the 279, 2020, 2000 and 2001 series.

• Complies with EN60715
• Width 2.5mm
• Weight 7.15g
• Manufacturer's part 210-648

This operating tool from WAGO has a partially insulated angled shaft and is suitable for use with the 260, 261, 262, 264, 270, 280, 281, 869, 870 and 880 series.

• Width 3.5mm
• Weight 10.15g
• Manufacturer's part 210-657

This operating tool from WAGO has a partially insulated shaft. It is particularly suitable for 280 series actuator and sensor terminal blocks and also for series 260, 261, 262, 264, 280, 281, 869, 870, 880, 2002.

• Width 3.5mm
• Weight 10.15g
• Manufacturer's part 210-658

WAGO 210-702 Self-adhesive Marking Strips . Marked Plain. White

• Manufacturers part no. 210-702
• Colour White
• Content 1pc
• Weight 200g

WAGO 210-704 Label Roll . Silver

• Manufacturers part no. 210-704
• Colour Silver
• Content 1pc
• Length 70mm
• Width 100mm
• Weight 665g

WAGO 210-707/000-002 Label Roll . Yellow

• Manufacturers part no. 210-707/000-002
• Colour Yellow
• Content 1pc
• Length 8mm
• Width 20mm
• Weight 160g

WAGO 210-708 Label Roll . White

• Manufacturers part no. 210-708
• Colour White
• Content 1pc
• Length 9.5mm
• Width 25mm
• Weight 195g

WAGO 210-710 Label Roll . White

• Manufacturers part no. 210-710
• Colour White
• Content 1pc
• Length 5mm
• Width 35mm
• Weight 195g

This Type 1 operating tool from WAGO has a partially insulated angled shaft.

• Width 2.5mm
• Weight 27g
• Manufacturer's part 210-719

This Type 2 operating tool from WAGO has a partially insulated angled shaft.

• Width 3.5mm
• Weight 32g
• Manufacturer's part 210-720

This Type 3 operating tool from WAGO has a partially insulated angled shaft.

• Width 5.5mm
• Weight 61.4g
• Manufacturer's part 210-721

This Type 1 operating tool set from WAGO has a partially insulated angled shaft.

• Width 2.5mm
• Weight 110g
• Manufacturer's part 210-722

Contents:

• 1x 2.5 x 0.4 mm blade
• 1x 3.5 x 0.5 mm blade
• 1x 5.5 x 0.8 mm blade

Silver coloured, plain labels for use with thermal transfer printers.

• Label size 44 x 99mm
• Supplied on rolls of 500
• WAGO type 210-804

WAGO 211-110 Marker Card , for plotter. White

• Manufacturers part no. 211-110
• Colour White
• Content 18pcs
• Length 12mm
• Weight 14.7g

WAGO 211-111 Marker Card , for thermal transfer printer. White

• Manufacturers part no. 211-111
• Colour White
• Content 1pc
• Length 12mm
• Weight 520g

WAGO 211-112 Marking Sleeve , for marker card. For wire diameter 1.6 - 3.2mm or 0.25 - 1.5mm².

• Manufacturers part no. 211-112
• Content 2000pcs
• Length 12mm
• Weight 0.24g

WAGO 211-113 Marking Sleeve , for marker card. For wire diameter 2.2 - 4.5mm or 0.5 - 4mm².

• Manufacturers part no. 211-113
• Content 2000pcs
• Length 12mm
• Weight 0.21g

WAGO 211-114 Marking Sleeve , for marker card. For wire diameter 3.7 - 5.9mm or 2.5 - 6mm².

• Manufacturers part no. 211-114
• Content 1000pcs
• Length 12mm
• Weight 0.33g

WAGO 211-115 Marking Sleeve , halogen-free for marker card. For wire diameter 5.5 - 10mm or 10 - 25mm², to be fitted prior to conductor termination.

• Manufacturers part no. 211-115
• Content 1000pcs
• Length 12mm
• Weight 0.33g

WAGO 211-120 Marker Card , halogen-free for plotter. To be fitted prior to conductor termination. White

• Manufacturers part no. 211-120
• Colour White
• Content 30pcs
• Length 23mm
• Weight 10.8g

WAGO 211-121 Marker Card , halogen-free for thermal transfer printer. To be fitted prior to conductor termination. White

• Manufacturers part no. 211-121
• Colour White
• Content 1pc
• Length 23mm
• Weight 520g

WAGO 211-122 Marking Sleeve , halogen-free for marker card. For wire diameter 1.6 - 3.2mm or 0.25 - 1.5mm², to be fitted prior to conductor termination.

• Manufacturers part no. 211-122
• Content 2000pcs
• Length 23mm
• Weight 0.41g

WAGO 211-123 Marking Sleeve , for marker card. For wire diameter 2.2 - 4.5mm or 0.5 - 4mm².

• Manufacturers part no. 211-123
• Content 2000pcs
• Length 23mm
• Weight 0.45g

WAGO 211-124 Marking Sleeve , for marker card. For wire diameter 3.7 - 5.9mm or 2.5 - 6mm².

• Manufacturers part no. 211-124
• Content 1000pcs
• Length 23mm
• Weight 0.61g

WAGO 211-125 Marking Sleeve , halogen-free for marker card. For wire diameter 5.5 - 10mm or 10 - 25mm², to be fitted prior to conductor termination.

• Manufacturers part no. 211-125
• Content 1000pcs
• Length 23mm
• Weight 0.745g

WAGO 211-129 Marking Sleeve , halogen-free for marker card. For wiresfrom 10mm², to be fitted prior to conductor termination.

• Manufacturers part no. 211-129
• Content 1000pcs
• Length 23mm
• Weight 0.33g

WAGO 211-135 Cable Tie Marker , halogen-free. Marked Plain, 3,500 Pieces per Roll. To be fitted prior to conductor termination. White

• Manufacturers part no. 211-135
• Colour White
• Content 1pc
• Length 25mm
• Width 10mm
• Weight 550g

WAGO 211-150 Labels On Din A4 Sheets , for laser printer. Marker surface s = 9mm b = 17mm, l = 35mm.

• Manufacturers part no. 211-150
• Content 20pcs
• Weight 11g

WAGO 211-151 Labels On Din A4 Sheets , halogen-free for laser printer. For double-deck terminal blocks, can also be fitted subsequently, for cable ties.

• Manufacturers part no. 211-151
• Content 25pcs
• Weight 11g

WAGO 211-155 Labels On Roll , for thermal transfer printer. For max. cable diameter 8mm, marker surface s = 8mm b = 18mm, l = 35mm.

• Manufacturers part no. 211-155
• Content 1pc
• Weight 126.1g

WAGO 211-156 Labels On Roll , for thermal transfer printer. For max. cable diameter 14mm, marker surface s = 13mm b = 23mm, l = 51mm.

• Manufacturers part no. 211-156
• Content 1pc
• Weight 228g

WAGO 211-161 Wire Marker for Thread-on Mounting , for 0.75 - 1.5mm² cables. For max. cable diameter 9mm. White

• Manufacturers part no. 211-161
• Colour White
• Content 1pc
• Weight 300g

WAGO 211-162 Wire Marker for Thread-on Mounting , for max. cable diameter 12mm. For 2.5 - 6mm². White

• Manufacturers part no. 211-162
• Colour White
• Content 1pc
• Weight 300g

Plain wire markers from WAGO suitable for thread-on mounting.

• Size 23 x 5mm
• Colour: white
• Supplied on roll of 1000
• Manufacturer's part 211-861

Plain wire markers from WAGO suitable for thread-on mounting.

• Size 26 x 7mm
• Colour: white
• Supplied on roll of 1000
• Manufacturer's part 211-862

The 221 Series from WAGO – Flexible, Fast and Safe

Mounting carrier; 221 Series - 4 mm²; for DIN-35 rail mounting/screw mounting; orange

Designed to enable DIN-35 rail or screw mounting of 221 series 2, 3 and 5-conductor splicing connectors 4mm².

• Colour: Orange
• Insulating material: Polyamide P66
• Width: 17.5mm
• Height: 77.6mm
• Depth 25.5mm
• Manufacturer's part 221-500

The 222 Series from WAGO

Mounting carrier; 222 Series; for DIN-35 rail mounting/screw mounting; orange

Designed to enable DIN-35 rail or screw mounting of 222 series 2, 3 and 5-conductor Classic splicing connectors.

• Colour: Orange
• Insulating material: Polyamide P66
• Strain relief plate available
• DIN-rail adapter available
• Height: 66mm
• Width: 22mm
• Depth: 26mm (from upper edge of DIN-rail)
• Manufacturer's part 222-500

The 222 Series from WAGO

Strain Relief Plate from WAGO suitable for use with mounting carriers from the 221 and 222 series.

• Colour: Orange
• For use with 222 or 221 series Mounting Carriers
• Height: 67.5mm
• Width: 4mm
• Depth: 52mm (from upper edge of DIN-rail)
• Manufacturer's part 222-505

Angled DIN-rail adaptor from WAGO, with mounting carrier, suitable for DIN-35 rail mounting.

• Colour: grey
• Width 18.5mm
• Height 21.5mm
• Depth 42mm
• Manufacturer's part 222-510

WAGO 247-506 Miniature WSB Quick Marking System , for WAGO-I/O-SYSTEM. Horizontal Marked "0V" (100ea.). Consecutive numbers/letters each strip. White

• Colour White
• Supplied in packs of 5
• Weight 6.472g
• Manufacturer's part 247-506

WAGO 247-506/000-006 Miniature WSB Quick Marking System , for WAGO-I/O-SYSTEM. Horizontal Marked "0V" (100ea.). Consecutive numbers/letters each strip.

• Colour: blue
• Supplied in packs of 5
• Weight 6.7g
• Manufacturer's part 247-506/000-006

WAGO 247-507 Miniature WSB Quick Marking System , for WAGO-I/O-SYSTEM. Horizontal Marked "-" (100ea.). Consecutive numbers/letters each strip. White

• Manufacturers part no. 247-507
• Colour White
• Content 5pcs
• Weight 6.472g