The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit II is a double deck diode terminal block with 2 diodes 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-2214/1000-491
• CAGE CLAMP®S Connection
• 52 x 5.2 x 70mm (H x W x D)

The WAGO DIN Rail Terminal Block, Multi-Level PE/N 5.2mm 24A Grey is a double deck terminal block, ground/through PE/N without marker carrier housing. Suitable for exe Applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-2217
• Grey colour
• CAGE CLAMP®S Connection
• 52 x 5.2 x 70mm (H x W x D)

This double deck through/through L/L terminal block from WAGO, with marker carrier, is suitable for Ex e II applications. It uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• AWG 22 to 12
• Colour: grey
• Height: 61.8mm
• Depth: 69.7
• Width: 5.2mm
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 2
• Nominal current: 24 A
• Nominal voltage: 500 V
• Number of pins: 4
• Rated surge voltage: 6 kV
• Manufacturer's part 2002-2231

This double deck through/through N/N terminal block from WAGO, with marker carrier, is suitable for Ex e II and Ex I applications. It uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• AWG 12 to 22
• Colour: blue
• Height: 61.8mm
• Depth: 69.7mm
• Width: 5.2mm
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (inflexible): 0.25mm²
• No. of rows: 2
• Nominal current: 24A
• Nominal voltage: 500V
• Number of pins: 4
• Rated surge voltage: 6 kV
• Manufacturer's part 2002-2234

This double deck 4-conductor ground PE terminal block from WAGO, with marker carrier, is suitable for Ex e II applications. It uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• AWG 12 to 22
• Colour: green and yellow
• Height: 61.8mm
• Depth 69.7mm
• Width: 5.2mm
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (inflexible): 0.25mm²
• No. of rows: 2
• Nominal current: 24A
• Number of pins: 4
• Manufacturer's part 2002-2237

WAGO 2002-2237/099-000 PE Double Deck with End Plate 4 conductor Ground, DIN rail mount terminal block, colour - green-yellow. For wire sizes AWG 22-12. Pack size 50.

• Function: PE
• AWG max.: 12
• AWG min.: 22
• Colour: Green-yellow
• Connection (components): Pull spring
• Connector features: + label
• Connector type (category): Dualport PG Terminal
• Content: 50 pc(s)
• Dimensions, height: 61.8mm
• Dimensions, length: 6.2mm
• Dimensions, width: 6.2mm
• Manufacturer part No.: 2002-2237/099-000
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 2
• Nominal current: 24 A
• Number of pins: 4
• Pins per row: 2
• Type (manufacturer type): 2002-2237/099-000
• Weight: 17.003g

WAGO 2002-2291 Double Deck 0.8mm end and intermediate plate for 2002 series, colour - grey.

• Colour: Grey
• Dimensions, height: 51.7mm
• Dimensions, length: 0.8mm
• Manufacturer part No.: 2002-2291
• Type (manufacturer type): 2002-2291
• Weight: 2.41g

This orange end and intermediate plate from WAGO is 0.8mm thick and suitable for use with TOP JOB rail-mounted terminal blocks from the 22 series.

• Orange colour
• Height 51.7mm
• Depth 69.7mm
• Manufacturer's part 2002-2292

The WAGO DIN Rail Terminal Block, Multi-Level 5.2mm 24A is a 4-conductor double deck terminal block. Through/Through, L/L, without marker carrier.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-2401
• Grey colour
• Front-entry wiring
• CAGE CLAMP®S Connection
• 52.5 x 5.2 x 104.8mm (H x W x D)

The WAGO DIN Rail Terminal Block, Multi-Level 5.2mm 24A is a 4-conductor double deck terminal block. Through/Through, N/L, without marker carrier.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, these terminal blocks are up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-2402
• Grey colour
• Front-entry wiring
• CAGE CLAMP®S Connection
• 52.5 x 5.2 x 104.8mm (H x W x D)

This double deck 8-conductor ground PE terminal block from WAGO, without marker carrier, is suitable for Ex e II applications. It uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• AWG 12 to 22
• Colour: green and yellow
• Height: 52.1mm
• Depth 105.1mm
• Width: 5.2mm
• Manufacturer's part 2002-2407

This is a horizontal double deck 8-conductor through L terminal block from WAGO, without marker carrier. It uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• AWG 12 to 18
• Colour: grey
• Height: 52.1mm
• Depth 105.1mm
• Width: 5.2mm
• Manufacturer's part 2002-2408

This double deck 8-conductor through N terminal block from WAGO, without marker carrier, is suitable for Ex i applications. It uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in.

With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• AWG 12 to 18
• Colour: blue
• Height: 52.1mm
• Depth 105.1mm
• Width: 5.2mm
• Manufacturer's part 2002-2409

This grey end and inner plate from WAGO is 0.8mm thick and suitable for use with 4-conductor terminal blocks from the 2002 series.

• Grey colour
• Height 52.1mm
• Depth 105.1mm
• Manufacturer's part 2002-2491

This orange end and inner plate from WAGO is 0.8mm thick and suitable for use with 4-conductor terminal blocks from the 2002 series.

• Orange colour
• Height 52.1mm
• Depth 105.1mm
• Manufacturer's part 2002-2492

WAGO 2002-2691 Double Deck 1mm end and intermediate plate for 2002 series 4 conductor terminal blocks, colour - grey. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, height: 48.9mm
• Dimensions, length: 1mm
• Manufacturer part No.: 2002-2691
• Type (manufacturer type): 2002-2691
• Weight: 4.23g

WAGO 2002-2692 Double Deck 1mm end and intermediate plate for 2002 series 4 conductor terminal blocks, colour - orange. Pack size 100.

• Colour: Orange
• Content: 100 pc(s)
• Dimensions, height: 48.9mm
• Dimensions, length: 1mm
• Manufacturer part No.: 2002-2692
• Type (manufacturer type): 2002-2692
• Weight: 4.23g

WAGO 2002-2991 Double Deck 1mm end and intermediate plate for 2002-2900 series, colour - grey. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, height: 42mm
• Dimensions, length: 1mm
• Manufacturer part No.: 2002-2991
• Type (manufacturer type): 2002-2991
• Weight: 3.56g

WAGO 2002-2992 Double Deck 1mm end and intermediate plate for 2002-2900 series, colour - orange. Pack size 100.

• Colour: Orange
• Content: 100 pc(s)
• Dimensions, height: 42mm
• Dimensions, length: 1mm
• Manufacturer part No.: 2002-2992
• Type (manufacturer type): 2002-2992
• Weight: 3.56g

Triple deck through/through/through L/L/L DIN rail terminal block from WAGO without marker carrier, suitable for Ex e II applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Wire size AWG 22 to 12
• Colour: grey
• Height: 69.5mm
• Depth: 93.2mm
• Width: 5.2mm
• Nominal current: 24A
• Nominal voltage: 500V
• Manufacturer's part 2002-3201

Triple deck through/through/through L/L/N DIN rail terminal block from WAGO without marker carrier, suitable for Ex e II applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Wire size AWG 22 to 12
• Colour: grey
• Height: 69.5mm
• Depth: 93.3mm
• Width: 5.2mm
• Nominal current: 24A
• Nominal voltage: 500V
• Manufacturer's part 2002-3203

A triple deck through/through/through terminal block from WAGO without marker carrier housing. Suitable for Ex e II applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Blue colour
• Size 69.5 x 5.2 x 93.5mm
• Rated voltage 440V
• Potential marking L/L/N
• Manufacturer's part 2002-3203

The WAGO DIN Rail Terminal Block, Multi Level 5.2mm, Green-Yellow is a double deck terminal block, 6-conductor ground PE without marker carrier. Internal commoning suitable for exe applications.

• 2002-3207
• Green-Yellow colour
• CAGE CLAMP®S Connection
• 69.5 x 5.2 x 93.5mm (H x W x D)

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit II is a triple-deck diode terminal block with 3 diodes 1N4007.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-3212/1000-674
• CAGE CLAMP®S Connection
• 69.5 x 5.2 x 93.5mm (H x W x D)

Triple deck ground/through/through PE/N/L DIN rail terminal block from WAGO without marker carrier, suitable for Ex e II applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Wire size AWG 22 to 12
• Colour: grey
• Height: 69.5mm
• Depth: 93.3mm
• Width: 5.2mm
• Nominal current: 24A
• Nominal voltage: 500V
• Manufacturer's part 2002-3217

The WAGO DIN Rail Terminal Block, Spring Cage 5.2mm Grey Circuit I is a triple-deck LED terminal block with red LED DC 24V.

The CAGE CLAMP®S connection technique allows stripped solid and ferruled conductors to be pushed in. With their space saving design, the terminal block is up to 30% smaller than standard terminal block and with a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• 2002-3221/1000-434
• CAGE CLAMP®S Connection
• 69.5 x 5.2 x 93.5mm (H x W x D)

Triple deck ground/through/through PE/L/L DIN rail terminal block from WAGO without marker carrier, suitable for Ex e II applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Wire size AWG 22 to 12
• Colour: grey
• Height: 69.5mm
• Depth: 93.3mm
• Width: 5.2mm
• Nominal current: 24A
• Nominal voltage: 500V
• Manufacturer's part 2002-3227

Triple deck ground/through/through L/L/L DIN rail terminal block from WAGO with marker carrier, suitable for Ex e II applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Wire size AWG 22 to 12
• Colour: grey
• Height: 81.3mm
• Depth: 93.3mm
• Width: 5.2mm
• Nominal current: 24A
• Nominal voltage: 500V
• Manufacturer's part 2002-3231

Triple deck through/through/through N/N/N DIN rail terminal block from WAGO with marker carrier, suitable for Ex e II and Ex i applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Wire size AWG 22 to 12
• Colour: blue
• Height: 81.3mm
• Depth: 93.3mm
• Width: 5.2mm
• Nominal current: 24A
• Nominal voltage: 500V
• Manufacturer's part 2002-3234

Triple deck 6 conductor PE DIN rail terminal block from WAGO with marker carrier, suitable for Ex e II applications.

The CAGE CLAMP® connection technique allows stripped solid and ferruled conductors to be pushed in. With its space saving design, the terminal block is up to 30% smaller than standard terminal blocks and has a conductor entry angle of less than 15° which allows easier installation in smaller spaces.

• Wire size AWG 22 to 12
• Colour: green/yellow
• Height: 81.3mm
• Depth: 93.3mm
• Width: 5.2mm
• Manufacturer's part 2002-3237

WAGO 2002-3291 Triple Deck 0.8mm end and intermediate plate for 2002 series, colour - grey. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, height: 69.5mm
• Dimensions, length: 0.8mm
• Manufacturer part No.: 2002-3291
• Type (manufacturer type): 2002-3291
• Weight: 3.98g

This orange triple deck end and inner plate from WAGO is 0.8mm thick and suitable for use with TOP JOB S terminal blocks from the 2002 series.

• Orange colour
• Height 69.5mm
• Depth 93.3mm
• Manufacturer's part 2002-3292

A 10A disconnect plug from WAGO suitable for carrier terminal blocks from the 2002 series.

• Manufacturer's part 2002-401

This 4-way push-in type jumper bar from WAGO is suitable for use with the 2002 series.

• Light grey colour
• Size 19 x 4.1 x 19.1mm
• Rated current 25A
• Manufacturer's part 2002-404

WAGO 2002-406 6-way 25A insulated push-in jumper bar for 2002 series, colour - light grey. Pack size 100.

• Colour: Light grey
• Content: 100 pc(s)
• Dimensions, height: 19mm
• Dimensions, length: 29.5mm
• Manufacturer part No.: 2002-406
• Type (manufacturer type): 2002-406
• Weight: 2.916g

WAGO 2002-407 7-way 25A insulated push-in jumper bar for 2002 series, colour - light grey. Pack size 100.

• Colour: Light grey
• Content: 100 pc(s)
• Dimensions, height: 19mm
• Dimensions, length: 34.7mm
• Manufacturer part No.: 2002-407
• Type (manufacturer type): 2002-407
• Weight: 3.385g

WAGO 2002-408 8-way 25A insulated push-in jumper bar for 2002 series, colour - light grey. Pack size 100.

• Colour: Light grey
• Content: 100 pc(s)
• Dimensions, height: 19mm
• Dimensions, length: 39.9mm
• Manufacturer part No.: 2002-408
• Type (manufacturer type): 2002-408
• Weight: 3.938g

This 10-way push-in type jumper bar from WAGO is suitable for use with the 2002 series.

• Light grey colour
• Size 19 x 4.1 x 50.4mm
• Rated current 25A
• Manufacturer's part 2002-410

WAGO 2002-4127 L1/L2/L3/PE Quad Deck 5.2mm, DIN rail mount terminal block, colour - grey. For wire sizes AWG 22-12. Pack size 25.

• Function: L1, L2, L3, PE
• AWG max.: 12
• AWG min.: 22
• Colour: Grey
• Connection (components): Pull spring
• Connector type (category): Quadport continuity
• Content: 25 pc(s)
• Dimensions, height: 83.9mm
• Dimensions, length: 5.2mm
• Dimensions, width: 5.2mm
• Manufacturer part No.: 2002-4127
• Max. cross section (flexible): 4mm²
• Max. cross section (inflexible): 2.5mm²
• Min. cross section (flexible): 0.25mm²
• Min. cross section (unflexible): 0.25mm²
• No. of rows: 4
• Nominal current: 20 A
• Nominal voltage: 800 V
• Number of pins: 7
• Rated surge voltage: 8 kV
• Type (manufacturer type): 2002-4127
• Weight: 25.282g

Quadruple-deck rail-mounted terminal block from WAGO, suitable for electric motor wiring.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Function: L1, L2, L3
• With marker carrier
• Wire size: AWG 22 to 12
• Colour: Grey
• Connection: Pull spring
• Height: 96.8mm
• Depth: 103.5mm
• Width: 5.2mm
• No. of rows: 4
• Nominal current: 20A
• Nominal voltage: 800V
• Rated surge voltage: 8kV
• Manufacturer's part 2002-4131

Quadruple-deck rail-mounted terminal block from WAGO, suitable for electric motor wiring.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Function: L1, L2
• With marker carrier
• Wire size: AWG 22 to 12
• Colour: Grey
• Connection: Pull spring
• Height: 96.8mm
• Depth: 103.5mm
• Width: 5.2mm
• No. of rows: 4
• Nominal current: 20A
• Nominal voltage: 800V
• Manufacturer's part 2002-4141

Quadruple-deck rail-mounted terminal block from WAGO, suitable for electric motor wiring.

This terminal block uses the CAGE CLAMP® connection technique which allows stripped solid and ferruled conductors to be pushed in. With its space saving design, this terminal block is up to 30% smaller than standard terminal blocks and with a conductor entry angle of less than 15° allows easier installation in smaller spaces.

• Function: L1, L2, L3, PE
• With marker carrier
• Wire size: AWG 22 to 12
• Colour: Grey
• Connection: Pull spring
• Height: 96.8mm
• Depth: 103.5mm
• Width: 5.2mm
• No. of rows: 4
• Nominal current: 20A
• Nominal voltage: 800V
• Manufacturer's part 2002-4157

WAGO 2002-4191 Quad Deck 1mm end and intermediate plate for 2002 series, colour - grey. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, height: 83.9mm
• Dimensions, length: 1mm
• Manufacturer part No.: 2002-4191
• Type (manufacturer type): 2002-4191
• Weight: 6.93g

This orange quadruple deck end and inner plate from WAGO is 1mm thick and suitable for use with TOP JOB S terminal blocks from the 2002 series.

• Colour: Orange
• Height: 83.9mm
• Depth: 103.5mm
• Manufacturer's part 2002-4192

Insulated staggered 10-way jumper bar from WAGO, suitable for use with the 2002 series.

• Colour: Light grey
• Width 50.8mm
• Rated current 25A
• Manufacturer's part 2002-480

Double deck 24A insulated vertical jumper from WAGO, suitable for use with the 2002 series.

• Colour: light grey
• Manufacturer's part 2002-492

Triple deck 24A insulated vertical jumper from WAGO, suitable for use with the 2002 series.

• Colour: light grey
• Manufacturer's part 2002-493

WAGO 2002-511 Modular TOPJOB®S Connector for 2002 series, colour - grey. For wire sizes. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, length: 5.2mm
• Manufacturer part No.: 2002-511
• Type (manufacturer type): 2002-511
• Weight: 2.745g

WAGO 2002-541 Modular TOPJOB®S Connector end plate for 2002 series, colour - grey. For wire sizes. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, length: 1.5mm
• Manufacturer part No.: 2002-541
• Type (manufacturer type): 2002-541
• Weight: 0.47g

WAGO 2002-549 Modular TOPJOB®S Connector spacer module for 2002 series, colour - grey. For wire sizes. Pack size 100.

• Colour: Grey
• Content: 100 pc(s)
• Dimensions, length: 5.2mm
• Manufacturer part No.: 2002-549
• Type (manufacturer type): 2002-549
• Weight: 0.16g