WMB Multiple marking system from WAGO, suitable for use with terminal blocks between 5 and 17.5mm wide.

• Marking: 21 to 30
• Colour: black on white
• Printing direction: horizontal
• Supplied as 10 strips with 10 markers per card
• Manufacturer's part 793-504

WMB Multiple marking system from WAGO, suitable for use with terminal blocks between 5 and 17.5mm wide.

• Marking: 31 to 40
• Colour: black on white
• Printing direction: horizontal
• Supplied as 10 strips with 10 markers per card
• Manufacturer's part 793-505

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Plain markers
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5501

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Horizontal markings 1 to 10
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5502

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Horizontal markings 11 to 20
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5503

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Horizontal markings 21 to 30
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5504

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Horizontal markings 31 to 40
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5505

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Horizontal markings 41 to 50
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5506

WMB Multiple marking system from WAGO, suitable for use with terminal blocks between 5 and 17.5mm wide.

• Marking: 51 to 100
• Colour: black on white
• Printing direction: horizontal
• Manufacturer's part 793-5507

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Horizontal markings 51 to 60
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5569

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Horizontal markings 61 to 70
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5570

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Horizontal markings 71 to 80
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-55715

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Horizontal markings 81 to 90
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5572

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Horizontal markings 91 to 100
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5573

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Vertical markings 1 to 10
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5602

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Vertical markings 11 to 20
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5603

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Vertical markings 21 to 30
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5604

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Vertical markings 31 to 40
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5605

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Vertical markings 41 to 50
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5606

WMB Multiple marking system from WAGO, suitable for use with terminal blocks between 5 and 17.5mm wide.

• Marking: 1 to 50
• Colour: black on white
• Printing direction: horizontal
• Supplied as 10 strips with 10 markers per card
• Manufacturer's part 793-566

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Vertical markings 51 to 60
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 793-5601

White identification cards from the WAGO WMB Multi marking system suitable for terminal blocks from the 793 series.

• Vertical markings 61 to 70
• For clamp width 5 to 5.2mm
• Stretchable
• Supplied in pack of 10 strips with 10 markers per card
• Manufacturer's part 794-5602

This 26-piece TOBJOBS Small Distribution terminal set from WAGO contains the feeding clamps as well as the outlet clamps for 9 light-current circles and a three-phase circuit. In addition, a complete set of accessories is included.

Set includes:

• 10 x NT/L/PE installation level terminal NT/L/PE, 4mm²
• 1 x installation level terminal L/L 4mm²
• 1 x end and intermediate plate
• 3 x 2-C through terminal, grey 16mm²
• 1 x 2-C through terminal, blue 16mm²
• 1 x 2-C PE terminal, green-yellow 16mm²
• 1 x 2-C NT terminal, blue 16mm²
• 1 x NT cover plate 16mm²
• 1 x NT cover plate 16mm²
• 1 x end bracket, wide
• 1 x busbar carrier with end bracket function
• 1 x N busbar, tin plated 0.12m
• 1 x N busbar cover, transparent 0.12m
• 1 x label strips, white 0.25m
• 1 x WMB inlay card 1 to 50
• 1 x WMB inlay card L1, L2..N, PE 1 card
• 1 x felt pen,smudge-proof, black

This TOPJOB® S FI /LS main distribution board set from WAGO includes all required components for wiring supply terminal blocks and connecting 14 AC circuits and 2 three-phase circuits.

It is also suitable for connection of L and N-conductors for FI/LS switches to the circuits via multilevel installation terminal blocks without disconnection possibility.

Set includes: 16 multilevel installation terminal blocks, N/L/PE, 4mm²/12 AWG; 2 multilevel installation terminal blocks, L/L, 4mm²/12 AWG; 2 end and intermediate plates; 3 grey 2-conductor supply terminal blocks for distribution boxes, 16mm²/4 AWG; 1 blue 2-conductor supply terminal block for distribution boxes, 16mm²/6AWG; 1 green/yellow 2-conductor ground terminal block, 16mm²/6 AWG; 1 10mm end stop; 1 white marking strip 0.5m; 1 WMB marker card 2 x 1 to 50; 1 WMB marker card 10 x L1, L2, L3, N, PE, L1, L2, L3, N, PE; 1 push-in type jumper bar; 1 permanent marker pen.

This KTY measuring transducer from WAGO records signals from KTY sensors featuring all standard characteristics. On the output side, the KTY temperature signal conditioner converts the temperature signal into a standard analog signal. The device features 3-way galvanic isolation with a test voltage of 2.5kV.

The WAGO 3-Way Isolation Amplifier, input signal 0 (4)-20mA, output 4 -20VmA is a high quality amplifier fixed for current signals.

Firmly adjusted, the 6mm amplifier is not only characterised, but also offer constantly bridgeable connections for supply voltages that are always at the same position. That means simply bridging instead of individual wires. Offers galvanic separation all inputs, outputs and supply circuits with a test voltage of 2.5kV.

The WAGO Feeding Isolator is a high quality repeater power supply, configurable with current and voltage output. The 6mm flat isolation amplifiers are not only the same contour but also the continuous bridgeable connections for the supply voltages are always at the same position - meaning simple bridges instead of individual wires. With the galvanic separation, all inputs, outputs and supply circuits are separated with a testing voltage from 2.5kV . Configuration via DIP switch.

This temperature signal conditioner from WAGO records signals from type J and K thermocouples and converts the temperature signal into a standard analog signal on the output side.. Configured through DIP switches.

This temperature signal conditioner from WAGO records signals from type J and K thermocouples and converts the temperature signal into a standard analog signal. Configured through DIP switch or the configuration software, over which further sensor types as well as inverting of the output signals can be set.