Unlocking tool from WAGO for female connectors without gripping plate or sliding connector release.

• Colour: orange
• Weight: 48g
• Manufacturer's part 2092-1630

Female 2-pole pluggable PCB connectors with straight solder pins and gripping plate from the WAGO picoMAX eCOM family.

• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Integrated test ports for testing parallel to conductor entry
• Custom-installed solder pins
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Pitch 7.5mm
• Height 35.4mm
• Width 12.5mm
• Depth 13.4mm
• Manufacturer's part 2092-3152

This 2-pole 5mm pitch female connector from WAGO is codable and has 1 locking latch. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 5mm
• Manufacturer's part 231-102/026-000

This 3-pole 5mm pitch female connector from WAGO has 1 locking latch with coding fingers to be cut off.

It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 5mm
• Manufacturer's part 231-103/026-000

This 4-pole 5mm pitch female connector from WAGO is codable and has 2 locking latches. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 5mm
• Manufacturer's part 231-104/026-000

This 5-pole 5mm pitch female connector from WAGO is codable and has 2 locking latches. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 5mm
• Manufacturer's part 231-105/026-000

This 10-pole 5mm pitch female connector from WAGO is codable and has 2 locking latches with coding finger. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 5mm
• Manufacturer's part 231-1108/026-000

Push button tool from WAGO suitable for use with both male and female connectors.

• Pin spacing 5 to 7.62mm
• Manufacturer's part 231-131

Male 2-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5mm
• Colour: grey
• Height 17mm
• Width 13.2mm
• Depth 8.4mm
• Straight solder pins
• Manufacturer's part 231-132/001-000

Male 3-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5mm
• Colour: grey
• Height 17mm
• Width 13.2mm
• Depth 8.4mm
• Straight solder pins
• Manufacturer's part 231-132/001-000

Male 4-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5mm
• Colour: grey
• Height 17mm
• Width 23.2mm
• Depth 8.4mm
• Straight solder pins
• Manufacturer's part 231-134/001-000

Male 5-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5mm
• Colour: grey
• Height 17mm
• Width 28.2mm
• Depth 8.4mm
• Straight solder pins
• Manufacturer's part 231-135/001-000

A vertical 8-way male connector with straight solder pins on a 5mm / 0.197 in, pitch.

• No. of ways: 8
• Temperature range: -60 to +100°C
• Solder pin length: 5mm
• Length: 43.2mm
• Height: 17mm
• Height from surface: 12mm
• Width: 8.4mm
• Material: Polyamide 6.6
• Colour: grey
• WAGO type 231-138/001-000

Male 10-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5mm
• Colour: grey
• Height 17mm
• Width 53.2mm
• Depth 8.4mm
• Straight solder pins
• Manufacturer's part 231-140/001-000

A vertical 12-way male connector with straight solder pins on a 5mm / 0.197 in, pitch.

• No. of ways: 12
• Temperature range: -60 to +100°C
• Solder pin length: 5mm
• Length: 63.2mm
• Height: 17mm
• Height from surface: 12mm
• Width: 8.4mm
• Material: Polyamide 6.6
• Colour: grey
• WAGO type 231-142/001-000

This 2-pole 7.5mm pitch female connector from WAGO is codable and has 1 locking latch. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 7.5mm
• Manufacturer's part 231-202/026-000

This 3-pole 7.5mm pitch female connector from WAGO is codable and has 1 locking latch. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 7.5mm
• Manufacturer's part 231-203/026-000

This 4-pole 7.5mm pitch female connector from WAGO is codable and has 2 locking latches. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 7.5mm
• Manufacturer's part 231-204/026-000

This 5-pole 7.5mm pitch female connector from WAGO is codable and has 2 locking latches. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 7.5mm
• Manufacturer's part 231-205/026-000

This 6-pole 7.5mm pitch female connector from WAGO is codable and has 2 locking latches. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 7.5mm
• Manufacturer's part 231-206/026-000

This 6-pole 7.5mm pitch female connector from WAGO is codable and has 2 locking latches. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 7.5mm
• Manufacturer's part 231-208/026-000

This 10-pole 7.5mm pitch female connector from WAGO is codable and has 2 locking latches. It uses the multi connection system (MCS) designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: grey
• Contact material: Copper alloy
• Grid pitch: 7.5mm
• Manufacturer's part 231-210/026-000

Male 2-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 7.5mm
• Colour: grey
• Height 17mm
• Depth 8.4mm
• Width 15.7mm
• Straight solder pins
• Manufacturer's part 231-232/001-000

Male 3-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 7.5mm
• Colour: grey
• Height 17mm
• Depth 8.4mm
• Width 23.2mm
• Straight solder pins
• Manufacturer's part 231-233/001-000

Male 4-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 7.5mm
• Colour: grey
• Height 17mm
• Depth 8.4mm
• Width 30.7mm
• Straight solder pins
• Manufacturer's part 231-234/001-000

Male 5-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 7.5mm
• Colour: grey
• Height 17mm
• Depth 8.4mm
• Width 38.2mm
• Straight solder pins
• Manufacturer's part 231-235/001-000

Male 6-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 7.5mm
• Colour: grey
• Height 17mm
• Depth 8.4mm
• Width 60.7mm
• Straight solder pins
• Manufacturer's part 231-238/001-000

Male 10-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 7.5mm
• Colour: grey
• Height 17mm
• Depth 8.4mm
• Width 75.7mm
• Straight solder pins
• Manufacturer's part 231-240/001-000

Female 2-pole connector from the WAGO multi-connection system (MCS). When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: Orange
• Grid pitch: 5.08mm
• Conductor size 0.08 to 2.5mm² (AWG 28 to 12)
• Supplied with latch and coding finger
• Width: 11.66mm
• Height: 14.3mm
• Depth: 26.45mm
• Manufacturer's part 231-302/026-000

Female 3-pole connector from the WAGO multi-connection system (MCS). When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: Orange
• Grid pitch: 5.08mm
• Conductor size 0.08 to 2.5mm² (AWG 28 to 12)
• Supplied with latch and coding finger
• Width: 16.74mm
• Height: 14,3mm
• Depth: 26.45mm
• Manufacturer's part 231-303/026-000

Female 4-pole connector from the WAGO multi-connection system (MCS). When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: Orange
• Grid pitch: 5.08mm
• Conductor size 0.08 to 2.5mm² (AWG 28 to 12)
• Supplied with latch and coding finger
• Width: 21.82mm
• Height: 14,3mm
• Depth: 26.45mm
• Manufacturer's part 231-304/026-000

Female 5-pole connector from the WAGO multi-connection system (MCS). When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: Orange
• Grid pitch: 5.08mm
• Conductor size 0.08 to 2.5mm² (AWG 28 to 12)
• Supplied with latch and coding finger
• Width: 26.9mm
• Height: 14,3mm
• Depth: 26.45mm
• Manufacturer's part 231-305/026-000

Female 6-pole connector from the WAGO multi-connection system (MCS). When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: Orange
• Grid pitch: 5.08mm
• Conductor size 0.08 to 2.5mm² (AWG 28 to 12)
• Supplied with latch and coding finger
• Width: 31.98mm
• Height: 14,3mm
• Depth: 26.45mm
• Manufacturer's part 231-306/026-000

Female 8-pole connector from the WAGO multi-connection system (MCS). When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: Orange
• Grid pitch: 5.08mm
• Conductor size 0.08 to 2.5mm² (AWG 28 to 12)
• Supplied with latch and coding finger
• Width: 42.14mm
• Height: 14,3mm
• Depth: 26.45mm
• Manufacturer's part 231-308/026-000

Female 10-pole connector from the WAGO multi-connection system (MCS). When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: Orange
• Grid pitch: 5.08mm
• Conductor size 0.08 to 2.5mm² (AWG 28 to 12)
• Supplied with latch and coding finger
• Width: 47.22mm
• Height: 14,3mm
• Depth: 26.45mm
• Manufacturer's part 231-310/026-000

Female 12-pole connector from the WAGO multi-connection system (MCS). When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• Colour: Orange
• Grid pitch: 5.08mm
• Conductor size 0.08 to 2.5mm² (AWG 28 to 12)
• Supplied with latch and coding finger
• Width: 62.46mm
• Height: 14,3mm
• Depth: 26.45mm
• Manufacturer's part 231-312/026-000

This 16-pole female connector from the WAGO MCS MIDI Classic family has locking levers, coding finger and latch.

The Multi Connection System (MCS) is designed without breaking capacity for compliance with DIN EN 61984. When used as intended, MCS connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Universal connection for all conductor types
• Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP® actuation
• Integrated test ports
• AWG size: 28 to 12
• Colour: orange
• Tin-plated copper alloy contacts
• Grid pitch: 5.08mm
• Manufacturer's part 231-316/037-000

Male 2-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 17mm
• Depth 8.4mm
• Width 13.28mm
• Straight solder pins
• Manufacturer's part 231-332/001-000

Male 3-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 17mm
• Depth 8.4mm
• Width 18.36mm
• Straight solder pins
• Manufacturer's part 231-333/001-000

Male 4-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 17mm
• Depth 8.4mm
• Width 23.44mm
• Straight solder pins
• Manufacturer's part 231-334/001-000

Male 5-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 17mm
• Depth 8.4mm
• Width 28.52mm
• Straight solder pins
• Manufacturer's part 231-335/001-000

Male 6-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 17mm
• Depth 8.4mm
• Width 33.66mm
• Straight solder pins
• Manufacturer's part 231-336/001-000

Male 8-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 17mm
• Depth 8.4mm
• Width 43.76mm
• Straight solder pins
• Manufacturer's part 231-338/001-000

Male 10-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 17mm
• Depth 8.4mm
• Width 53.92mm
• Straight solder pins
• Manufacturer's part 231-340/001-000

Male 12-pole header with closed ends from WAGO suitable for vertical PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 17mm
• Depth 8.4mm
• Width 64.08mm
• Straight solder pins
• Manufacturer's part 231-342/001-000

Male 4-pole header with closed ends from WAGO suitable for horizontal PCB mounting.

• Rated current 12A
• Pitch 5mm
• Colour: grey
• Width 23.2mm
• Height 12.2mm
• Depth 12mm
• Angled solder pins
• Manufacturer's part 231-434/001-000

Male 8-pole header with closed ends from WAGO suitable for horizontal PCB mounting.

• Rated current 12A
• Pitch 5mm
• Colour: grey
• Width 43.2mm
• Height 12.2mm
• Depth 12mm
• Angled solder pins
• Manufacturer's part 231-438/001-000

Male 2-pole header with closed ends from WAGO suitable for horizontal PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 12.2mm
• Depth 12mm
• Width 13.28mm
• Angled solder pins
• Manufacturer's part 231-532/001-000

Male 3-pole header with closed ends from WAGO suitable for horizontal PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 12.2mm
• Depth 12mm
• Width 18.36mm
• Angled solder pins
• Manufacturer's part 231-533/001-000

Male 4-pole header with closed ends from WAGO suitable for horizontal PCB mounting.

• Rated current 12A
• Pitch 5.08mm
• Colour: orange
• Height 12.2mm
• Depth 12mm
• Width 18.36mm
• Angled solder pins
• Manufacturer's part 231-534/001-000