Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 2
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 21.1mm (17.5mm from surface)
• Width: 9mm
• Manufacturer's part 2091-1402

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 3
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 21.1mm (17.5mm from surface)
• Width: 12.5mm
• Manufacturer's part 2091-1403

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 4
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 21.1mm (17.5mm from surface)
• Width: 16mm
• Manufacturer's part 2091-1404

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 5
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 21.1mm (17.5mm from surface)
• Width: 19.5mm
• Manufacturer's part 2091-1405

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 6
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 21.1mm (17.5mm from surface)
• Width: 23mm
• Manufacturer's part 2091-1406

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 8
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 21.1mm (17.5mm from surface)
• Width: 30mm
• Manufacturer's part 2091-1408

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 10
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 21.1mm (17.5mm from surface)
• Width: 37mm
• Manufacturer's part 2091-1410

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 12
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 21.1mm (17.5mm from surface)
• Width: 44mm
• Manufacturer's part 2091-1412

Male header with angled solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Number of poles: 2
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 16mm (12.4mm from surface)
• Width: 9mm
• Manufacturer's part 2091-1422

Male header with angled solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Number of poles: 3
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 16mm (12.4mm from surface)
• Width: 12.5mm
• Manufacturer's part 2091-1423

Male header with angled solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Number of poles: 4
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 16mm (12.4mm from surface)
• Width: 16mm
• Manufacturer's part 2091-1424

Male header with angled solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Number of poles: 5
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 16mm (12.4mm from surface)
• Width: 19.5mm
• Manufacturer's part 2091-1425

Male header with angled solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Number of poles: 6
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 16mm (12.4mm from surface)
• Width: 23mm
• Manufacturer's part 2091-1426

Male header with angled solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Number of poles: 8
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 16mm (12.4mm from surface)
• Width: 30mm
• Manufacturer's part 2091-1428

Male through-hole connector from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 2
• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Testing parallel to conductor entry – tip contact
• For "wire-to-wire" and "board-to-wire" connections
• Integrated release lever
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 15.9mm
• Width: 9mm
• Manufacturer's part 2091-1522/002-000

Male through-hole connector from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 4
• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Testing parallel to conductor entry – tip contact
• For "wire-to-wire" and "board-to-wire" connections
• Integrated release lever
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 15.9mm
• Width: 16mm
• Manufacturer's part 2091-1524/002-000

Male through-hole connector from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 6
• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Testing parallel to conductor entry – tip contact
• For "wire-to-wire" and "board-to-wire" connections
• Integrated release lever
• Pin spacing 3.5mm
• Colour: Light grey
• Contact material: Tin-plated electrolytic copper
• Height: 15.9mm
• Width: 23mm
• Manufacturer's part 2091-1526/002-000

Coding key carrier from WAGO, suitable for 3.5mm pin spacing.

• Colour: Orange
• Manufacturer's part 2091-1610

The WAGO 209-123 is a grey DIN rail mounting foot that can be screwed on to 260 series terminals.

• 6.4mm wide
• Weight 23.32g
• Manufacturer's part 209-123

Insulated operating tool from WAGO suitable for use with the 236, 280 and 281 series.

• 1 way
• Pitch 5/5.08mm
• Manufacturer's part 209-130

Female connector with a gripping plate from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 2
• Universal connection of all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Test port parallel to conductor entry – touch contact
• Integrated locking latches prevent accidental disconnection
• Colour: light grey
• Pin spacing: 5mm
• Contact material: Tin-plated electrolytic copper
• Length: 35.4mm
• Width: 10mm
• Manufacturer's part: 2092-1102

Female connector with a gripping plate from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 2
• Universal connection of all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Testing parallel to conductor entry – tip contact
• Integrated locking latches prevent accidental disconnection
• Colour: light grey
• Pin spacing: 5mm
• Height: 35.4mm
• Width: 10mm
• Contact material: Tin-plated electrolytic copper
• Manufacturer's part 2092-1102/002-000

Female connector with a gripping plate from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 3
• Universal connection of all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Testing parallel to conductor entry – tip contact
• Integrated locking latches prevent accidental disconnection
• Colour: light grey
• Pin spacing: 5mm
• Height: 35.4mm
• Width: 15mm
• Contact material: Tin-plated electrolytic copper
• Manufacturer's part 2092-1103/002-000

Female connector with a gripping plate from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 4
• Universal connection of all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Testing parallel to conductor entry – tip contact
• Integrated locking latches prevent accidental disconnection
• Colour: light grey
• Pin spacing: 5mm
• Height: 35.4mm
• Width: 20mm
• Contact material: Tin-plated electrolytic copper
• Manufacturer's part 2092-1104/002-000

Female connector with a gripping plate from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of Poles: 5
• AWG size: 12
• Colour: Light grey
• Contact material: Cathode copper
• Length: 40.4mm
• Width: 25mm
• Number of contacts: 5
• Stripping length: 10mm
• Manufacturer's part: 2092-1105

Female connector with a gripping plate from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 5
• Universal connection of all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Testing parallel to conductor entry – tip contact
• Integrated locking latches prevent accidental disconnection
• Colour: light grey
• Pin spacing: 5mm
• Height: 35.4mm
• Width: 25mm
• Contact material: Tin-plated electrolytic copper
• Manufacturer's part 2092-1105/002-000

Female connector with a gripping plate from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 6
• Universal connection of all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Testing parallel to conductor entry – tip contact
• Integrated locking latches prevent accidental disconnection
• Colour: light grey
• Pin spacing: 5mm
• Height: 40.4mm
• Width: 30mm
• Contact material: Tin-plated electrolytic copper
• Manufacturer's part 2092-1106/002-000

Female connector with a gripping plate from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 8
• Universal connection of all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Testing parallel to conductor entry – tip contact
• Integrated locking latches prevent accidental disconnection
• Colour: light grey
• Pin spacing: 5mm
• Height: 40.4mm
• Width: 40mm
• Contact material: Tin-plated electrolytic copper
• Manufacturer's part 2092-1108/002-000

Female connector with a gripping plate from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 10
• Universal connection of all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Testing parallel to conductor entry – tip contact
• Integrated locking latches prevent accidental disconnection
• Colour: light grey
• Pin spacing: 5mm
• Height: 40.4mm
• Width: 50mm
• Contact material: Tin-plated electrolytic copper
• Manufacturer's part 2092-1110/002-000

Female eCOM pluggable PCB connector with gripping plate and straight solder pins from the WAGO picoMAX® system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 2
• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Integrated test ports for testing parallel to conductor entry
• Custom-installed solder pins
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Length 34mm
• Width 10mm
• Manufacturer's part 2092-1152

Female eCOM pluggable PCB connector with gripping plate and straight solder pins from the WAGO picoMAX® system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 4
• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Integrated test ports for testing parallel to conductor entry
• Custom-installed solder pins
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Length 34mm
• Width 20mm
• Manufacturer's part 2092-1154

Female eCOM pluggable PCB connector with gripping plate and straight solder pins from the WAGO picoMAX® system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 5
• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Integrated test ports for testing parallel to conductor entry
• Custom-installed solder pins
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Length 39mm
• Width 25mm
• Manufacturer's part 2092-1155

Female 2-pole pluggable PCB connectors with straight solder pins from the WAGO picoMAX eCOM family.

• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Integrated test ports for testing parallel to conductor entry
• Custom-installed solder pins
• Colour: light grey
• Tin-plated electrolytic copper contacts
• 5mm pitch
• Height 16.2mm
• Depth 13.4mm
• Width 10mm
• Manufacturer's part 2092-1172

Female 2-pole header from the WAGO picoMAX family® with straight solder pins.

• Touch-proof PCB outputs
• Easy-to-identify PCB inputs and outputs
• Pitch 5mm
• Colour: light grey
• Tin-plated copper alloy contacts
• Height 19.8mm
• Width: 10mm
• Depth 13.6mm
• Manufacturer's part 2092-1302

Female header with angled solder pins from the WAGO picoMAX® system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 2
• Touchproof PCB outputs
• Easy-to-identify PCB inputs and outputs
• Coding option available
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated copper alloy contacts
• Length: 13.6mm
• Width: 10mm
• Manufacturer's part 2092-1322

Female eCOM pluggable PCB connector with gripping plate and angled solder pins from the WAGO picoMAX® system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 2
• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Integrated test ports for testing parallel to conductor entry
• Custom-installed solder pins
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Length: 13.4mm
• Width: 10mm
• Manufacturer's part: 2092-1352

Female eCOM pluggable PCB connector with gripping plate and angled solder pins from the WAGO picoMAX® system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 4
• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Integrated test ports for testing parallel to conductor entry
• Custom-installed solder pins
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Length: 13.4mm
• Width: 20mm
• Manufacturer's part: 2092-1354

Female eCOM pluggable PCB connector with gripping plate and angled solder pins from the WAGO picoMAX® system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 12
• Universal connection for all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Integrated test ports for testing parallel to conductor entry
• Custom-installed solder pins
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Length: 13.4mm
• Width: 60mm
• Manufacturer's part: 2092-1362

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 2
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Height 23.1mm (19.5mm from surface)
• Width 12.2mm
• Manufacturer's part 2092-1402

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 3
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Height 23.1mm (19.5mm from surface)
• Width 17.2mm
• Manufacturer's part 2092-1403

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 4
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Height 23.1mm (19.5mm from surface)
• Width 22.2mm
• Manufacturer's part 2092-1404

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 5
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Height 23.1mm (19.5mm from surface)
• Width 27.2mm
• Manufacturer's part 2092-1405

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 6
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Height 23.1mm (19.5mm from surface)
• Width 32.2mm
• Manufacturer's part 2092-1406

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 8
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Height 23.1mm (19.5mm from surface)
• Width 42.2mm
• Manufacturer's part 2092-1408

Male header with straight solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 10
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Height 23.1mm (19.5mm from surface)
• Width 52.2mm
• Manufacturer's part 2092-1410

Male header with angled solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of pins: 4
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Height 18mm (14.4mm from surface)
• Width 22.2mm
• Manufacturer's part 2092-1424

Male header with angled solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of pins: 5
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Height 18mm (14.4mm from surface)
• Width 27.2mm
• Manufacturer's part 2092-1425

Male header with angled solder pins from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of pins: 10
• Assembly of female connectors without loss of poles, allowing different functions to be divided within one male header
• Coding pins inserted into the header interface prevent mismating, allowing subsequent coding in panel feedthrough applications
• Female connector is fully shrouded by the male header's housing, providing vibration resistance up to 20g
• Pin spacing: 5mm
• Colour: light grey
• Tin-plated electrolytic copper contacts
• Height 18mm (14.4mm from surface)
• Width 52.2mm
• Manufacturer's part 2092-1430

Male connector with an integrated release lever from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 2
• Universal connection of all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Testing parallel to conductor entry – tip contact
• For "wire-to-wire" and "board-to-wire" connections
• Colour: light grey
• Pin spacing: 5mm
• Contact material: Tin-plated electrolytic copper
• Length: 18.2mm
• Width: 12.2mm
• Manufacturer's part 2092-1522/002-000

Male connector with an integrated release lever from the WAGO picoMAX® pluggable connection system designed without breaking capacity for compliance with DIN EN 61984.

When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated.

• Number of poles: 4
• Universal connection of all conductor types
• Simple, push-in termination of solid and ferruled conductors
• Easy-to-use design does not require special tools
• Ability to wire while mated or unmated
• Testing parallel to conductor entry – tip contact
• For "wire-to-wire" and "board-to-wire" connections
• Colour: light grey
• Pin spacing: 5mm
• Contact material: Tin-plated electrolytic copper
• Length: 18.2mm
• Width: 22.2mm
• Manufacturer's part 2092-1524/002-000