A range of wall mounted enclosures with glazed doors. The enclosures have been manufactured from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Glazed doors
• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

A range of wall mounted enclosures with glazed doors. The enclosures have been manufactured from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

A range of wall mounted enclosures with glazed doors. The enclosures have been manufactured from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Glazed doors
• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

A range of wall mounted enclosures with glazed doors. The enclosures have been manufactured from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Glazed doors
• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

A range of wall mounted enclosures with glazed doors. The enclosures have been manufactured from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Glazed doors
• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

A range of wall mounted enclosures with glazed doors. The enclosures have been manufactured from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Glazed doors
• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 300 x 250 PBP325

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 400 x 300 PBP43

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 400 x 400 PBP44

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 600 x 400 PBP64

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 600 x 500 PBP65

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 800 x 600 PBP86

A range of enclosures made from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

A range of enclosures made from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

A range of enclosures made from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

A range of enclosures made from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

A range of enclosures made from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

A range of enclosures made from reinforced polyester with 30% glass fibre which gives high resistance against impact together with being lighter than steel enclosures but giving the same mechanical resistance. They are particularly suitable for mounting electrical or electronic equipment in aggressive environments where polyester offers the best quality and a longer life span.

• Heat-moulded polyester enclosures, to RAL-7035
• Self-extinguishable materials, as per ASTM D635
• Extreme working temperatures of -30°C to +120°C
• Resistant against rusting and corrosion by chemical or atmospheric agents
• Easy to move around and install due to its lightness
• High mechanical resistance against impact
• Door hinges that allow the door to open 180°
• Designed to be used both indoors and outdoors
• Protection to IP66 standard

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 300 x 250 PBP325
• Polyester protected to IP66 standard

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 400 x 300 PBP43
• Polyester protected to IP66 standard

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 400 x 400 PBP44
• Polyester protected to IP66 standard

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 500 x 400 PBP54
• Polyester protected to IP66 standard

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 600 x 400 PBP64
• Polyester protected to IP66 standard

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 500 x 500 PBP65
• Polyester protected to IP66 standard

These back plates have been designed specifically for wall mounted enclosures. The back plates have been individually styled to fit perfectly.

• Supplied as 800 x 600 PBP86
• Polyester protected to IP66 standard

A 280 x 210 x 130mm insulated ABS plastic enclosure supplied with triangular locks. Suitable for a wide range of industrial applications.

• Strong ABS construction
• Includes backplates and fixing brackets
• Colour light grey RAL 7035
• Also available is a key lockable handle with two keys

A 400 x 300 x 165mm insulated ABS plastic enclosure supplied with triangular locks. Suitable for a wide range of industrial applications.

• Strong ABS construction
• Includes backplates and fixing brackets
• Colour light grey RAL 7035
• Also available is a key lockable handle with two keys

A 600 x 400 x 200mm insulated ABS plastic enclosure supplied with triangular locks. Suitable for a wide range of industrial applications.

• Strong ABS construction
• Includes backplates and fixing brackets
• Colour light grey RAL 7035
• Also available is a key lockable handle with two keys

An 800 x 600 x 260mm insulated ABS plastic enclosure supplied with triangular locks. Suitable for a wide range of industrial applications.

• Strong ABS construction
• Includes backplates and fixing brackets
• Colour light grey RAL 7035
• Also available is a key lockable handle with two keys

A 300 x 300 x 150mm brushed stainless steel enclosure that has an IP65 rating when fully sealed. A rugged design and robust construction makes this enclosure suitable for a wide range of industrial applications.

• Manufactured from Grade 304 Stainless Steel
• Earth studs and galvanised back plate included
• IP65 When fully sealed

A 400 x 300 x 200mm brushed stainless steel enclosure that has an IP65 rating when fully sealed. A rugged design and robust construction makes this enclosure suitable for a wide range of industrial applications.

• Manufactured from Grade 304 Stainless Steel
• Earth studs and galvanised back plate included
• IP65 When fully sealed

A 400 x 400 x 200mm brushed stainless steel enclosure that has an IP65 rating when fully sealed. A rugged design and robust construction makes this enclosure suitable for a wide range of industrial applications.

• Manufactured from Grade 304 Stainless Steel
• Earth studs and galvanised back plate included
• IP65 When fully sealed

A 500 x 400 x 200mm brushed stainless steel enclosure that has an IP65 rating when fully sealed. A rugged design and robust construction makes this enclosure suitable for a wide range of industrial applications.

• Manufactured from Grade 304 Stainless Steel
• Earth studs and galvanised back plate included
• IP65 When fully sealed

A 600 x 600 x 200mm brushed stainless steel enclosure that has an IP65 rating when fully sealed. A rugged design and robust construction makes this enclosure suitable for a wide range of industrial applications.

• Manufactured from Grade 304 Stainless Steel
• Earth studs and galvanised back plate included
• IP65 When fully sealed

An 800 x 800 x 300mm brushed stainless steel enclosure that has an IP65 rating when fully sealed. A rugged design and robust construction makes this enclosure suitable for a wide range of industrial applications.

• Manufactured from Grade 304 Stainless Steel
• Earth studs and galvanised back plate included
• IP65 When fully sealed

A 1000 x 600 x 300mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 1000 x 800 x 300mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 1200 x 600 x 300mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 1200 x 800 x 300mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 300 x 250 x 150mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 300 x 300 x 150mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 400 x 300 x 200mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 400 x 400 x 200mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 500 x 400 x 200mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 500 x 500 x 250mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 600 x 400 x 300mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 600 x 500 x 200mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 600 x 500 x 250mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 600 x 500 x 300mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035

A 600 x 600 x 200mm epoxy powder coated mild steel enclosure fitted with galvanised backplates and earth studs. The enclosure features gland plates top and bottom, enabling the enclosure to be mounted in a variety of orientations. Suitable for most general purpose applications.

• IP65 When sealed
• Colour RAL 7035