The Hammond PJ Series Polyester Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.It provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching cover/door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a continuous stainless steel hinge and is secured with Snap Latch door fasteners, which include provision for the addition of a padlock. A captive, oil resistant gasket provides a seal when the cover/door is closed10-32 threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel. Mounting hardware is included.Threaded brass inserts are also provided to the rear of the enclosure for fitting of mounting feet/brackets.Stainless steel mounting brackets and hardware are included to enable wall-mounting of the enclosure at the rear. Optional inner panels are available in a white powder coated steel finish.

The Hammond PJ Series Polyester Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.It provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching cover/door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a continuous stainless steel hinge and is secured with Snap Latch door fasteners, which include provision for the addition of a padlock. A captive, oil resistant gasket provides a seal when the cover/door is closed10-32 threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel. Mounting hardware is included.Threaded brass inserts are also provided to the rear of the enclosure for fitting of mounting feet/brackets.Stainless steel mounting brackets and hardware are included to enable wall-mounting of the enclosure at the rear. Optional inner panels are available in a white powder coated steel finish.

The Hammond PJ Series Polyester Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.It provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching cover/door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a continuous stainless steel hinge and is secured with Snap Latch door fasteners, which include provision for the addition of a padlock. A captive, oil resistant gasket provides a seal when the cover/door is closed10-32 threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel. Mounting hardware is included.Threaded brass inserts are also provided to the rear of the enclosure for fitting of mounting feet/brackets.Stainless steel mounting brackets and hardware are included to enable wall-mounting of the enclosure at the rear.

Optional inner panels are available in a white powder coated steel finish.

The Hammond PJU Series Glass Reinforced Polyester (GRP) Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.Provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a moulded hinge, secured with a stainless steel pin. Snap Latch door fasteners, which include provision for the addition of a padlock are used to secure the door. A captive, oil resistant gasket provides a seal when the door is closed.10-32 threaded brass inserts are provided on the inside rear of the enclosure, together with mounting hardware, to enable fitting of an optional internal mounting panel.10-32 threaded brass inserts and stainless steel flanges are provided at the rear of the enclosure for fixing of foot-mount brackets. Mounting hardware is included.Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot-mount brackets provided.

Optional inner panels are available in a white powder coated steel finish.

• Moulded fibreglass polyester enclosure with matching door
• Moulded hinge with stainless steel pin
• Operating temperatures between 130°C and - 40 °C (266°F to - 40 °F)
• NEMA Type 1, 2, 3, 4, 4X,12, & 13
• Impact index of 6.78 J (5ft/lb)
• Dimensions: H255 x W210 x D105mm
• Optional Inner Panel Dimensions: H222 x W175mm
• Weight: 2.27kg
• Light Grey finish
• RoHS Compliant

The Hammond PJU Series Glass Reinforced Polyester (GRP) Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.Provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a moulded hinge, secured with a stainless steel pin. Snap Latch door fasteners, which include provision for the addition of a padlock are used to secure the door. A captive, oil resistant gasket provides a seal when the door is closed.10-32 threaded brass inserts are provided on the inside rear of the enclosure, together with mounting hardware, to enable fitting of an optional internal mounting panel.10-32 threaded brass inserts and stainless steel flanges are provided at the rear of the enclosure for fixing of foot-mount brackets. Mounting hardware is included.Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot-mount brackets provided.

Optional inner panels are available in a white powder coated steel finish.

The Hammond PJU Series Glass Reinforced Polyester (GRP) Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.Provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a moulded hinge, secured with a stainless steel pin. Snap Latch door fasteners, which include provision for the addition of a padlock are used to secure the door. A captive, oil resistant gasket provides a seal when the door is closed.10-32 threaded brass inserts are provided on the inside rear of the enclosure, together with mounting hardware, to enable fitting of an optional internal mounting panel.10-32 threaded brass inserts and stainless steel flanges are provided at the rear of the enclosure for fixing of foot-mount brackets. Mounting hardware is included.Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot-mount brackets provided.

Optional inner panels are available in a white powder coated steel finish.

The Hammond PJU Series Glass Reinforced Polyester (GRP) Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.Provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a moulded hinge, secured with a stainless steel pin. Snap Latch door fasteners, which include provision for the addition of a padlock are used to secure the door. A captive, oil resistant gasket provides a seal when the door is closed.10-32 threaded brass inserts are provided on the inside rear of the enclosure, together with mounting hardware, to enable fitting of an optional internal mounting panel.10-32 threaded brass inserts and stainless steel flanges are provided at the rear of the enclosure for fixing of foot-mount brackets. Mounting hardware is included.Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot-mount brackets provided.

Optional inner panels are available in a white powder coated steel finish.

• Moulded fibreglass polyester enclosure with matching cover.
• Moulded hinge with stainless steel pin.
• Operating temperatures between 130°C and - 40 °C (266°F to - 40 °F).
• NEMA Type 1, 2, 3, 4, 4X,12, & 13.
• Impact index of 6.78 J (5ft/lb).
• Dimensions: H357 x W312 x D156mm.
• Optional Inner Panel Dimensions: H324 x W276mm.
• Weight: 4.09kg.
• Light Grey finish.
• RoHS Compliant.

The Hammond PJU Series Glass Reinforced Polyester (GRP) Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.Provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a moulded hinge, secured with a stainless steel pin. Snap Latch door fasteners, which include provision for the addition of a padlock are used to secure the door. A captive, oil resistant gasket provides a seal when the door is closed.10-32 threaded brass inserts are provided on the inside rear of the enclosure, together with mounting hardware, to enable fitting of an optional internal mounting panel.10-32 threaded brass inserts and stainless steel flanges are provided at the rear of the enclosure for fixing of foot-mount brackets. Mounting hardware is included.Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot-mount brackets provided.

Optional inner panels are available in a white powder coated steel finish.

The Hammond PJU Series Glass Reinforced Polyester (GRP) Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.Provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a moulded hinge, secured with a stainless steel pin. Snap Latch door fasteners, which include provision for the addition of a padlock are used to secure the door. A captive, oil resistant gasket provides a seal when the door is closed.10-32 threaded brass inserts are provided on the inside rear of the enclosure, together with mounting hardware, to enable fitting of an optional internal mounting panel.10-32 threaded brass inserts and stainless steel flanges are provided at the rear of the enclosure for fixing of foot-mount brackets. Mounting hardware is included.Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot-mount brackets provided.

Optional inner panels are available in a white powder coated steel finish.

The Hammond PJU Series Glass Reinforced Polyester (GRP) Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.Provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a moulded hinge, secured with a stainless steel pin. Snap Latch door fasteners, which include provision for the addition of a padlock are used to secure the door. A captive, oil resistant gasket provides a seal when the door is closed.10-32 threaded brass inserts are provided on the inside rear of the enclosure, together with mounting hardware, to enable fitting of an optional internal mounting panel.10-32 threaded brass inserts and stainless steel flanges are provided at the rear of the enclosure for fixing of foot-mount brackets. Mounting hardware is included.Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot-mount brackets provided.

Optional inner panels are available in a white powder coated steel finish.

The Hammond PJU Series Glass Reinforced Polyester (GRP) Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.Provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a moulded hinge, secured with a stainless steel pin. Snap Latch door fasteners, which include provision for the addition of a padlock are used to secure the door. A captive, oil resistant gasket provides a seal when the door is closed.10-32 threaded brass inserts are provided on the inside rear of the enclosure, together with mounting hardware, to enable fitting of an optional internal mounting panel.10-32 threaded brass inserts and stainless steel flanges are provided at the rear of the enclosure for fixing of foot-mount brackets. Mounting hardware is included.Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot-mount brackets provided.

Optional inner panels are available in a white powder coated steel finish.

The Hammond PJU Series Glass Reinforced Polyester (GRP) Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.Provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a moulded hinge, secured with a stainless steel pin. Snap Latch door fasteners, which include provision for the addition of a padlock are used to secure the door. A captive, oil resistant gasket provides a seal when the door is closed.10-32 threaded brass inserts are provided on the inside rear of the enclosure, together with mounting hardware, to enable fitting of an optional internal mounting panel.10-32 threaded brass inserts and stainless steel flanges are provided at the rear of the enclosure for fixing of foot-mount brackets. Mounting hardware is included.Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot-mount brackets provided.

Optional inner panels are available in a white powder coated steel finish.

PCB mounting screws to suit the mounting pillars inside Hammond's 1557 series enclosures.

• PCB mounting screws
• #6 x ¼in. self-tapping
• Supplied in packs of 50
• Hammond manufacturing type SC526-50

The Hammond Small Rainproof Ventilator is designed to equalise internal/external pressure and temperature.Ventilators assist in condensation prevention, by allowing enclosures to breathe.

Complies with NEMA Type 3R, IEC 60529 IP24.

Moulded in Light Grey corrosion resistant UV stabilised polycarbonate, with gasket protection to enclosure wall.Suitable for use with most metallic and non-metallic enclosures, with a wall thickness of up to 4mm.An internal vent channel and grille reduces insect intrusion.

Refer to the Manual for fitting instructions.

• Moulded UV Stabilised Polycarbonate
• 4mm Maximum Enclosure Wall Thickness
• Dimensions: H30 x W25mm.
• IP24 Rated
• Light Grey Finish

The Hammond Large Rainproof Ventilator is designed to equalise internal/external pressure and temperature.Ventilators assist in condensation prevention, by allowing enclosures to breathe.

Complies with NEMA Type 3R, IEC 60529 IP24.

Moulded in Light Grey corrosion resistant UV stabilised polycarbonate, with gasket protection to enclosure wall.Suitable for use with most metallic and non-metallic enclosures, with a wall thickness of up to 4mm.An internal vent channel and grille reduces insect intrusion.

Refer to the Manual for fitting instructions.

• Moulded UV Stabilised Polycarbonate
• 4mm Maximum Enclosure Wall Thickness
• Dimensions: H69 x W51mm.
• IP24 Rated
• Light Grey Finish

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Joint less foam gasket ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Joint less foam gasket ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Joint less foam gasket ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

Steel enclosure NSYCRN32515 (300 x 250 x 150mm) is manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

These metal enclosures have been manufactured from a continuous length of sheet steel double folded at the front, with the back welded to the frame. Both are externally and internally protected with polyester epoxy resin grey textured paint to RAL-7032.

• Jointless foam gasketing ensures lifetime protection against ingress of dust and liquids to IP 55
• Perforated door reinforcement profiles allowing fixing of equipment
• Concealed and easily removable hinges allowing 120° opening and reversibility of door
• Welded studs on body and door for earth continuity
• Large gland plate
• Depth adjustable mounting plate supports
• Approvals and Certifications EN62208, LCIE, UL , CUL, Bureau Veritas, DNV, LR, GL Lloyds and ATEX

This frame from Schneider Electric is suitable for mounting Din Rail enclosures.

• Compatible with 150mm deep enclosures
• Suitable for mounting DIN 43800 modules
• Galvanised steel with RAL 7035 light grey front panel
• Supplied in kit form with all fixings and instructions
• Overall dimensions 300 x 250 x 150mm
• Manufacturer's part: Schneider Electric NSYDLCR18

A complete range of mounting plates enabling you to provide all the mountings needed for this installation system. The arrangement of the drill holes combined with the positioning of the nuts cover all the fixing point distances.

• Galvanised steel plates
• Pre-drilled holes for fitting accessories
• Earth connection