A watertight ABS wall mount enclosure from Hammond's 1557 series.

• Size: 200 x 200 x 45mm
• Colour: black
• Material: ABS with a flammability rating of UL94-HB
• Ideally suited for mounting printed circuit boards
• Can be used in a table top configuration or two different wall-mount configurations
• Rounded corners and face provide a more modern look while still offering superior water-tight ratings
• Recommended for indoor use
• Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
• Gasket is one piece made from high temperature, U.L. listed silicone
• Designed to meet IP66
• Lid is secured with included M4 stainless steel machine screws which thread into corrosion-resistant bushings for repetitive assembly & disassembly
• Supplied complete with cover screws, rubber feet, wall mount feet and screws
• All hardware is designed to avoid corrosion caused by harsh environments over time
• Hammond manufacturing type 1557HBK

A replacement gasket for Hammond 1557H and 1557HA size enclosures.

• Replacement gasket for 1557 series Hammond enclosures
• Gasket is one-piece, made from high temperature U.L. listed silicone
• Hammond manufacturing type 1557HGASKET

A watertight ABS wall mount enclosure from Hammond's 1557 series.

• Size: 200 x 200 x 45mm
• Colour: grey
• Material: ABS with a flammability rating of UL94-HB
• Ideally suited for mounting printed circuit boards
• Can be used in a table top configuration or two different wall-mount configurations
• Rounded corners and face provide a more modern look while still offering superior water-tight ratings
• Recommended for indoor use
• Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
• Gasket is one piece made from high temperature, U.L. listed silicone
• Designed to meet IP66
• Lid is secured with included M4 stainless steel machine screws which thread into corrosion-resistant bushings for repetitive assembly & disassembly
• Supplied complete with cover screws, rubber feet, wall mount feet and screws
• All hardware is designed to avoid corrosion caused by harsh environments over time
• Hammond manufacturing type 1557HGY

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish. The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel. A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H254 x W203 x D152mm
• Inner Panel dimensions: H222 x W175
• Weight: 4.54kg

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish. The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel. A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H305 x W254 x D152mm
• Inner panel Dimensions: H273 x W226
• Weight: 6.35kg

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish. The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel. A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H305 x W254 x D203mm
• Inner Panel dimensions: H273 x W226mm
• Weight: 7.26kg

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish. The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel. A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H305 x W305 x D152mm
• Inner Panel dimensions: H273 x W276mm
• Weight: 7.71kg

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish. The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel. A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H356 x W305 x D152mm
• Inner Panel dimensions: H324 x W276mm
• Weight: 8.62kg

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish. The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel. A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H356 x W305 x D203mm
• Inner Panel dimensions: H324 x W276mm
• Weight: 9.07kg

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish. The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel. A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H406 x W356 x D254mm
• Inner Panel dimensions: H375 x W327mm
• Weight: 11.79kg

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish. The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel. A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H152 x W102 x D102mm
• Inner Panel dimensions: H124 x W73mm
• Weight: 1.81kg

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish. The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel. A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H152 x W152 x D102mm
• Inner Panel dimensions: H124 x W124mm
• Weight: 2.27kg

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish. The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel. A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H203 x W152 x D89mm
• Inner Panel dimensions: H171 x W124mm
• Weight: 2.38kg

The Hammond Eclipse Junior Stainless Steel Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure. It provides watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. It also provides protection in specific applications where corrosion may be a problem.

The body and front panel/door of the enclosure are formed from 16 gauge (1.6mm), 304 stainless steel with a smooth brushed finish.The removable inner panel is formed from 14 gauge (2mm) thick, unpainted galvanised steel. It has smooth, continuously welded seams without knockouts, cut-outs or holes and has a formed lip designed to exclude flowing liquids and contaminants. Continuous stainless steel hinges allow 180° opening, for ease of access. The door has a seamless poured-in place gasket and is secured with a quarter turn slot latch which can only be opened with a tool, for added safety. The rear internal wall of the enclosure has welded mounting studs which are tapped to enable fitting of a supplied internal mounting panel.A bonding stud is provided on the inside of the door and a grounding stud is provided on the inside top of the enclosure, together with the necessary grounding hardware.14 gauge welded rear mounting brackets and associated mounting hardware are also provided.

• 16 gauge (1.6mm) stainless steel body
• 14 gauge (2mm) galvanised steel inner panel
• Stainless steel hinges
• 180 opening door
• Dimensions: H203 x W203 x D102mm
• Inner Panel dimensions: H171 x W175mm
• Weight: 3.18kg

The Hammond Type 4X HPN4PC Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Compatible with enclosure wall thickness of 1.6mm to 6.35mm.

Recognised component for use with UL & CSA listed enclosures, Type 1, 3, 3R, 4, 4X.

• 49mm Diameter
• RAL7035 Light Grey
• Moulded Polycarbonate
• 35mm Minimum Hole Diameter
• 41mm Maximum Hole Diameter
• Neoprene/EPDM Gasket
• Self centring, anti-rotational design
• Easy one person installation
• No tools required

Available in 7 sizes.

Designed to maintain the IP66/NEMA 4X rating of Enclosure once fitted.

The Hammond Stainless Steel HP Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Secured with a 10-24 x 0.55" threaded stud and plated wing-nut.

• 48mm Diameter
• Brushed 304 Stainless Steel Finish
• Oil Resistant Gasket
• 35mm Maximum Hole Diameter

Available in 8 sizes.

Designed to maintain the IP66 rating of Enclosure once fitted.

The Hammond Type 4X HPN4PC Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Compatible with enclosure wall thickness of 1.6mm to 6.35mm.

Recognised component for use with UL & CSA listed enclosures, Type 1, 3, 3R, 4, 4X.

• 55mm Diameter
• RAL7035 Light Grey
• Moulded Polycarbonate
• 43mm Minimum Hole Diameter
• 48mm Maximum Hole Diameter
• Neoprene/EPDM Gasket
• Self centring, anti-rotational design
• Easy one person installation
• No tools required

Available in 7 sizes.

Designed to maintain the IP66/NEMA 4X rating of Enclosure once fitted.

The Hammond Stainless Steel HP Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Secured with a 10-24 x 0.55" threaded stud and plated wing-nut.

• 56mm Diameter
• Brushed 304 Stainless Steel Finish
• Oil Resistant Gasket
• 43mm Maximum Hole Diameter

Available in 8 sizes.

Designed to maintain the IP66 rating of Enclosure once fitted.

The Hammond Type 4X HPN4PC Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Compatible with enclosure wall thickness of 1.6mm to 6.35mm.

Recognised component for use with UL & CSA listed enclosures, Type 1, 3, 3R, 4, 4X.

Available in 7 sizes.

Designed to maintain the IP66/NEMA 4X rating of Enclosure once fitted.

The Hammond Type 4X HPN4PC Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Compatible with enclosure wall thickness of 1.6mm to 6.35mm.

Recognised component for use with UL & CSA listed enclosures, Type 1, 3, 3R, 4, 4X.

Available in 7 sizes.

Designed to maintain the IP66/NEMA 4X rating of Enclosure once fitted.

The Hammond Stainless Steel HP Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Secured with a 10-24 x 0.55" threaded stud and plated wing-nut.

Available in 8 sizes.

Designed to maintain the IP66 rating of Enclosure once fitted.

The Hammond Type 4X HPN4PC Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Compatible with enclosure wall thickness of 1.6mm to 6.35mm.

Recognised component for use with UL & CSA listed enclosures, Type 1, 3, 3R, 4, 4X.

Available in 7 sizes.

Designed to maintain the IP66/NEMA 4X rating of Enclosure once fitted.

The Hammond Stainless Steel HP Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Secured with a 10-24 x 0.55" threaded stud and plated wing-nut.

Available in 8 sizes.

Designed to maintain the IP66 rating of Enclosure once fitted.

The Hammond Stainless Steel HP Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Secured with a 10-24 x 0.55" threaded stud and plated wing-nut.

Available in 8 sizes.

Designed to maintain the IP66 rating of Enclosure once fitted.

The Hammond Type 4X HPN4PC Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Compatible with enclosure wall thickness of 1.6mm to 6.35mm.

Recognised component for use with UL & CSA listed enclosures, Type 1, 3, 3R, 4, 4X.

Available in 7 sizes.

Designed to maintain the IP66/NEMA 4X rating of Enclosure once fitted.

The Hammond Stainless Steel HP Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Secured with a 10-24 x 0.55" threaded stud and plated wing-nut.

Available in 8 sizes.

Designed to maintain the IP66 rating of Enclosure once fitted.

The Hammond Type 4X HPN4PC Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Compatible with enclosure wall thickness of 1.6mm to 6.35mm.

Recognised component for use with UL & CSA listed enclosures, Type 1, 3, 3R, 4, 4X.

Available in 7 sizes.

Designed to maintain the IP66/NEMA 4X rating of Enclosure once fitted.

The Hammond Stainless Steel HP Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Secured with a 10-24 x 0.55" threaded stud and plated wing-nut.

Available in 8 sizes.

Designed to maintain the IP66 rating of Enclosure once fitted.

The Hammond Stainless Steel HP Series Hole Plug is designed to seal unused pushbutton holes, conduit openings or knock-out holes against the ingress of dust, oil and water.

Secured with a 10-24 x 0.55" threaded stud and plated wing-nut.

The Hammond Inner Mounting Panel is manufactured from 14 gauge (2mm thick) steel with white powder coated finish.

Suitable for use with the following enclosures:

31-1766 (PCJ181610L) 31-1794 (PJU181610L)

• Mounting hardware is included with the enclosure.
• Dimensions: L429 x W378mm
• Weight: 2.41kg
• White finish
• RoHS Compliant

The Hammond Inner Mounting Panel is manufactured from 14 gauge (2mm thick) steel with white powder coated finish.

Suitable for use with the following enclosures:

31-1795 (PJU201610L)

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included. Optional inner panels are available in a white powder coated steel finish.

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included. Optional inner panels are available in a white powder coated steel finish.

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included. Optional inner panels are available in a white powder coated steel finish.

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included. Optional inner panels are available in a white powder coated steel finish.

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included. Optional inner panels are available in a white powder coated steel finish.

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included. Optional inner panels are available in a white powder coated steel finish.

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included. Optional inner panels are available in a white powder coated steel finish.

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included. Optional inner panels are available in a white powder coated steel finish.

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included.Optional inner panels are available in a white powder coated steel finish.

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included. Optional inner panels are available in a white powder coated steel finish.

The Hammond PCJ Series Polycarbonate Junction Box is designed to provide insulation and protection for controls and components for use in both indoor and outdoor conditions. The Enclosure is watertight to IEC 60529, IP66 with a flammability rating of UL94,V-0.

Ideal for use with industrial pump controls, waste water, irrigation, solar/wind and chemical plant controls.

The injection moulded polycarbonate thermoplastic enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is secured with Snap Latch door fasteners, which include provision for the addition of a padlock, if required. A captive, oil resistant gasket provides a seal when the door is closed. Threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel or terminal kit mounting. Multi-directional mounting of the enclosure is possible, using the Polycarbonate foot mount brackets provided.Mounting hardware is included. Optional inner panels are available in a white powder coated steel finish.

The Hammond Inner Mounting Panel is manufactured from 14 gauge (2mm thick) steel with white powder coated finish.

Suitable for use with the following enclosures:

31-1767 (PCJ664L)

• Mounting hardware is included with the enclosure.
• Dimensions: L122 x W122mm
• Weight: 0.23kg
• White finish
• RoHS Compliant

The Hammond Inner Mounting Panel is manufactured from 14 gauge (2mm thick) steel with white powder coated finish.

Suitable for use with the following enclosures:

31-1768 (PCJ864L)

The Hammond Inner Mounting Panel is manufactured from 14 gauge (2mm thick) steel with white powder coated finish.

Suitable for use with the following enclosures:

31-1769(PCJ884L)

The Hammond Inner Mounting Panel is manufactured from 14 gauge (2mm thick) steel with white powder coated finish.

Suitable for use with the following enclosures:

31-1759 (PCJ1082L) 31-1760 (PCJ1084L)31-1761 (PCJ1086L)

The Hammond Inner Mounting Panel is manufactured from 14 gauge (2mm thick) steel with white powder coated finish.

Suitable for use with the following enclosures:

31-1762 (PCJ12104L) 31-1763 (PCJ12106L)

The Hammond Inner Mounting Panel is manufactured from 14 gauge (2mm thick) steel with white powder coated finish.

Suitable for use with the following enclosures:

31-1764 (PCJ14126L)

The Hammond PJ Series Polyester Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.It provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a continuous stainless steel hinge and is secured with Snap Latch door fasteners, which include provision for the addition of a padlock. A captive, oil resistant gasket provides a seal when the door is closed10-32 threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel. Mounting hardware is included.Threaded brass inserts are also provided to the rear of the enclosure for fitting of mounting feet/brackets.Stainless steel mounting brackets and hardware are included to enable wall-mounting of the enclosure at the rear. Optional inner panels are available in a white powder coated steel finish.

• Moulded fibreglass polyester enclosure with matching door
• Continuous stainless steel hinge
• Stainless steel lockable snap latch fastening
• Stainless steel mounting feet/brackets
• Operating temperatures between 130°C and - 40 °C (266°F to - 40 °F)
• NEMA Type 1, 2, 3, 4, 4X, 12 & 13
• Impact index of 6.78 J (5ft/lb)
• Dimensions: H257 x W210 x D156mm
• Optional Inner Panel Dimensions: H222 x W175mm
• Weight: 2.73kg
• Light Grey finish
• RoHS Compliant

The Hammond PJ Series Polyester Junction Box is designed for use as an instrument enclosure, electric, hydraulic or pneumatic control housing, electrical junction box or terminal wiring enclosure.It provides insulation and watertight protection to IEC 60529, IP66, where equipment may be hosed down or otherwise become very wet. Ideal for use in applications with high temperatures or highly corrosive environments.

The moulded fibreglass polyester enclosure with matching cover/door, can be easily punched, cut, or drilled. It comes in a light grey finish and features enhanced UV inhibitors to protect against outdoor weathering. The door is supported by a continuous stainless steel hinge and is secured with Snap Latch door fasteners, which include provision for the addition of a padlock. A captive, oil resistant gasket provides a seal when the cover/door is closed10-32 threaded brass inserts are provided on the inside rear of the enclosure, to enable fitting of an optional internal mounting panel. Mounting hardware is included.Threaded brass inserts are also provided to the rear of the enclosure for fitting of mounting feet/brackets.Stainless steel mounting brackets and hardware are included to enable wall-mounting of the enclosure at the rear. Optional inner panels are available in a white powder coated steel finish.