A rugged steel instrument enclosure from the Hammond 511 - 513 series. The enclosure has slots on each side for ventilation.

• Dimensions (W x H): 76 x 51mm
• Length top / bottom: 133 / 124mm
• 18 gauge steel base and top for extra strength
• Front & back panel will not push in
• Sides include two horizontal rows of ventilation
• Choice of sloping or vertical sides by reversing case
• Two tone grey powder coat finish
• Top is dark satin grey
• Bottom, front & back are smooth light grey
• Supplied complete with four self adhesive rubber feet and required hardware
• Hammond type 512-0900

A rugged steel instrument enclosure from the Hammond 511 - 513 series. The enclosure has slots on each side for ventilation.

• Dimensions (W x H): 121 x 89mm
• Length top / bottom: 219 / 200mm
• 18 gauge steel base and top for extra strength
• Front & back panel will not push in
• Sides include two horizontal rows of ventilation
• Choice of sloping or vertical sides by reversing case
• Two tone grey powder coat finish
• Top is dark satin grey
• Bottom, front & back are smooth light grey
• Supplied complete with four self adhesive rubber feet and required hardware
• Hammond type 513-0900

A sloped steel / aluminium enclosure from the Hammond 515 series. The enclosure has a steel base with side ventilation slots. The top / rear panel is made from aluminium.

• 18 gauge steel base for extra strength
• 1.6mm thick aluminium top / rear panel
• Slope angle 15°
• Sides include vertical rows of ventilation slots
• Two-tone grey powder paint finish
• Base is dark satin grey
• Sloping top is smooth light grey with dimensions of 114.05 x 87.5mm
• Supplied complete with 4 self-adhesive rubber feet and required hardware
• Hammond type 515-0910

A sloped steel / aluminium enclosure from the Hammond 515 series. The enclosure has a steel base with side ventilation slots. The top / rear panel is made from aluminium.

• 18 gauge steel base for extra strength
• 1.6mm thick aluminium top / rear panel
• Slope angle 15°
• Sides include vertical rows of ventilation slots
• Two-tone grey powder paint finish
• Base is dark satin grey
• Sloping top is smooth light grey with dimensions of 151.05 x 87.72mm
• Supplied complete with 4 self-adhesive rubber feet and required hardware
• Hammond type 515-0910

A sloped steel / aluminium enclosure from the Hammond 515 series. The enclosure has a steel base with side ventilation slots. The top / rear panel is made from aluminium.

• 18 gauge steel base for extra strength
• 1.6mm thick aluminium top / rear panel
• Slope angle 15°
• Sides include vertical rows of ventilation slots
• Two-tone grey powder paint finish
• Base is dark satin grey
• Sloping top is smooth light grey with dimensions of 189.5 x 87.5mm
• Supplied complete with 4 self-adhesive rubber feet and required hardware
• Hammond type 515-0910

A sloped steel / aluminium enclosure from the Hammond 515 series. The enclosure has a steel base with side ventilation slots. The top / rear panel is made from aluminium.

• 18 gauge steel base for extra strength
• 1.6mm thick aluminium top / rear panel
• Slope angle 15°
• Sides include vertical rows of ventilation slots
• Two-tone grey powder paint finish
• Base is dark satin grey
• Sloping top is smooth light grey with dimensions of 189.05 x 87.72
• Supplied complete with 4 self-adhesive rubber feet and required hardware
• Hammond type 515-0910

A sloped steel / aluminium enclosure from the Hammond 515 series. The enclosure has a steel base with side ventilation slots. The top / rear panel is made from aluminium.

• 18 gauge steel base for extra strength
• 1.6mm thick aluminium top / rear panel
• Slope angle 15°
• Sides include vertical rows of ventilation slots
• Two-tone grey powder paint finish
• Base is dark satin grey
• Sloping top is smooth light grey with dimensions of 297.05 x 103.39mm
• Supplied complete with 4 self-adhesive rubber feet and required hardware
• Hammond type 515-0910

A rugged steel instrument enclosure from the Hammond 518 series. The enclosure is supplied with an optional carrying handle and has a row of louvres on each side for ventilation.

• Dimensions (W x H): 197 x 121mm
• Length top / bottom: 281 / 248mm
• 18 gauge steel base and top for extra strength
• Front & back panel will not push in
• Sides include one horizontal row of louvres for ventilation
• Choice of sloping or vertical sides by reversing case
• Includes handle & holes in the top for mounting
• Also includes plastic plugs if handle is not desired
• Two-tone grey powder coat finish
• Top is dark satin grey
• Bottom, front & back are smooth light grey
• Supplied complete with four self-adhesive rubber feet and required hardware
• Assembled with 8 machine screws into weld-nuts for repetitive assembly & disassembly
• Hammond type 518-0910

A rugged steel instrument enclosure from the Hammond 518 series. The enclosure is supplied with an optional carrying handle and has a row of louvres on each side for ventilation.

• Dimensions (W x H): 298 x 159mm
• Length top / bottom: 245 / 197mm
• 18 gauge steel base and top for extra strength
• Front & back panel will not push in
• Sides include one horizontal row of louvres for ventilation
• Choice of sloping or vertical sides by reversing case
• Includes handle & holes in the top for mounting
• Also includes plastic plugs if handle is not desired
• Two-tone grey powder coat finish
• Top is dark satin grey
• Bottom, front & back are smooth light grey
• Supplied complete with four self-adhesive rubber feet and required hardware
• Assembled with 8 machine screws into weld-nuts for repetitive assembly & disassembly
• Hammond type 518-0920

A sloped steel / aluminium enclosure from the Hammond 519 series. The enclosure has a steel base with side ventilation slots. The top / rear panel is made from aluminium.

• Dimensions: (W x D): 216 x 145mm
• Rear height: 96mm
• Front height: 47mm
• 18 gauge steel base for extra strength
• 1.6mm thick aluminium top / rear panel
• Slope angle 30°
• Sides include vertical rows of ventilation slots
• Two-tone grey powder paint finish
• Base is dark satin grey
• Sloping top is smooth light grey
• Supplied complete with 4 self-adhesive rubber feet and required hardware
• Hammond type 519-0910

A sloped steel / aluminium enclosure from the Hammond 519 series. The enclosure has a steel base with side ventilation slots. The top / rear panel is made from aluminium.

• Dimensions: (W x D): 348 x 175mm
• Rear height: 96mm
• Front height: 47mm
• 18 gauge steel base for extra strength
• 1.6mm thick aluminium top / rear panel
• Slope angle 30°
• Sides include vertical rows of ventilation slots
• Two-tone grey powder paint finish
• Base is dark satin grey
• Sloping top is smooth light grey
• Supplied complete with 4 self-adhesive rubber feet and required hardware
• Hammond type 519-0920

Natural aluminium optional bottom panel, 298 x 222 x 2mm, manufactured using 2mm thick aluminium.

• Panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 2mm (0.08in.)
• Fully 'framed' support from walnut chassis.
• Hardware is of proper length to allow use of optional bottom plate
• Hammond part HW1310ALPL

Black aluminium optional bottom panel, 298 x 222 x 2mm, manufactured using 2mm thick aluminium.

• Panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 2mm (0.08in.)
• Fully 'framed' support from walnut chassis.
• Hardware is of proper length to allow use of optional bottom plate
• Hammond part HW1310BKPL

Natural aluminium optional bottom panel, 400 x 222 x 2mm, manufactured using 2mm thick aluminium.

• Panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 2mm (0.08in.)
• Fully 'framed' support from walnut chassis.
• Hardware is of proper length to allow use of optional bottom plate
• Hammond part HW1710ALPL

Natural aluminium optional bottom panel, 400 x 222 x 2mm, manufactured using 2mm thick aluminium.

• Panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 2mm (0.08in.)
• Fully 'framed' support from walnut chassis.
• Hardware is of proper length to allow use of optional bottom plate
• Hammond part HW1710BKPL

Attractively styled, rugged walnut box, 330 x 254 x 76mm, with 2mm thick aluminium top panels with natural finish. Optional bottom plates are available separately.

• Walnut chassis is 19.8mm (0.778in.) thick - corners are produced with wood bracing and dovetail construction methods
• Designed to handle heavy components
• Top panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 2mm (0.08in.) thick
• Fully 'framed' support from walnut chassis.
• Includes four large round rubber feet (0.75in. dia. x 0.56in. high) with mounting hardware into inserts to avoid wood damage
• Hardware is of proper length to allow use of optional bottom plate
• Hammond part HWCHAS1310AL

Attractively styled, rugged walnut box, 330 x 254 x 76mm, with 2mm thick aluminium top panels with black finish. Optional bottom plates are available separately.

• Walnut chassis is 19.8mm (0.778in.) thick - corners are produced with wood bracing and dovetail construction methods
• Designed to handle heavy components
• Top panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 2mm (0.08in.) thick
• Fully 'framed' support from walnut chassis.
• Includes four large round rubber feet (0.75in. dia. x 0.56in. high) with mounting hardware into inserts to avoid wood damage
• Hardware is of proper length to allow use of optional bottom plate
• Hammond part HWCHAS1310BK

Attractively styled, rugged walnut box, 432 x 254 x 76mm, with 2mm thick aluminium top panels with natural finish. Optional bottom plates are available separately.

• Walnut chassis is 19.8mm (0.778in.) thick - corners are produced with wood bracing and dovetail construction methods
• Designed to handle heavy components
• Top panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 2mm (0.08in.) thick
• Fully 'framed' support from walnut chassis.
• Includes four large round rubber feet (0.75in. dia. x 0.56in. high) with mounting hardware into inserts to avoid wood damage
• Hardware is of proper length to allow use of optional bottom plate
• Hammond part HWCHAS1710AL

Attractively styled, rugged walnut box, 432 x 254 x 76mm, with 2mm thick aluminium top panels with black finish. Optional bottom plates are available separately.

• Walnut chassis is 19.8mm (0.778in.) thick - corners are produced with wood bracing and dovetail construction methods
• Designed to handle heavy components
• Top panel is aluminium for easy modification and thick enough to support heavy transformers without bowing - 2mm (0.08in.) thick
• Fully 'framed' support from walnut chassis.
• Includes four large round rubber feet (0.75in. dia. x 0.56in. high) with mounting hardware into inserts to avoid wood damage
• Hardware is of proper length to allow use of optional bottom plate
• Hammond part HWCHAS1710BK

This instrument case from the Hammond RM Series measures 130 x 100 x 70mm and is made from light grey general purpose ABS plastic. It is fitted with front and rear removable plastic panels.

• Designed to house PC boards
• Material carries a UL flammability rating of UL94 HB
• Two part clam shell construction. Bottom half includes moulded-in standoffs for easy PC board installation
• Four short M3 screws included
• Front and rear panels interchangeable and easily removable for modifications
• Designed to meet IP43
• Manufacturer's part RM2015L

This instrument case from the Hammond RM Series measures 130 x 100 x 50mm and is made from light grey general purpose ABS plastic. It is fitted with front and rear removable plastic panels.

• Designed to house PC boards
• Material carries a UL flammability rating of UL94 HB
• Two part clam shell construction. Bottom half includes moulded-in standoffs for easy PC board installation
• Four short M3 screws included
• Front and rear panels interchangeable and easily removable for modifications
• Designed to meet IP43
• Manufacturer's part RM2015M

This instrument case from the Hammond RM Series measures 130 x 100 x 30mm and is made from light grey general purpose ABS plastic. It is fitted with front and rear removable plastic panels.

• Designed to house PC boards
• Material carries a UL flammability rating of UL94 HB
• Two part clam shell construction. Bottom half includes moulded-in standoffs for easy PC board installation
• Four short M3 screws included
• Front and rear panels interchangeable and easily removable for modifications
• Designed to meet IP43
• Manufacturer's part RM2015S

This instrument case from the Hammond RM Series measures 190 x 140 x 70mm and is made from light grey general purpose ABS plastic. It is fitted with front and rear removable plastic panels.

• Designed to house PC boards
• Material carries a UL flammability rating of UL94 HB
• Two part clam shell construction. Bottom half includes moulded-in standoffs for easy PC board installation
• Four short M3 screws included
• Front and rear panels interchangeable and easily removable for modifications
• Designed to meet IP43
• Manufacturer's part RM2055L

This instrument case from the Hammond RM Series measures 190 x 140 x 50mm and is made from light grey general purpose ABS plastic. It is fitted with front and rear removable plastic panels.

• Designed to house PC boards
• Material carries a UL flammability rating of UL94 HB
• Two part clam shell construction. Bottom half includes moulded-in standoffs for easy PC board installation
• Four short M3 screws included
• Front and rear panels interchangeable and easily removable for modifications
• Designed to meet IP43
• Manufacturer's part RM2055M

This instrument case from the Hammond RM Series measures 190 x 140 x 30mm and is made from light grey general purpose ABS plastic. It is fitted with front and rear removable plastic panels.

• Designed to house PC boards
• Material carries a UL flammability rating of UL94 HB
• Two part clam shell construction. Bottom half includes moulded-in standoffs for easy PC board installation
• Four short M3 screws included
• Front and rear panels interchangeable and easily removable for modifications
• Designed to meet IP43
• Manufacturer's part RM2055S

This instrument case from the Hammond RM Series measures 250 x 180 x 100mm and is made from light grey general purpose ABS plastic. It is fitted with front and rear removable plastic panels.

• Designed to house PC boards
• Material carries a UL flammability rating of UL94 HB
• Two part clam shell construction. Bottom half includes moulded-in standoffs for easy PC board installation
• Four short M3 screws included
• Front and rear panels interchangeable and easily removable for modifications
• Designed to meet IP43
• Manufacturer's part RM2095L

This instrument case from the Hammond RM Series measures 250 x 180 x 75mm and is made from light grey general purpose ABS plastic. It is fitted with front and rear removable plastic panels.

• Designed to house PC boards
• Material carries a UL flammability rating of UL94 HB
• Two part clam shell construction. Bottom half includes moulded-in standoffs for easy PC board installation
• Four short M3 screws included
• Front and rear panels interchangeable and easily removable for modifications
• Designed to meet IP43
• Manufacturer's part RM2095M

This instrument case from the Hammond RM Series measures 250 x 180 x 50mm and is made from light grey general purpose ABS plastic. It is fitted with front and rear removable plastic panels.

• Designed to house PC boards
• Material carries a UL flammability rating of UL94 HB
• Two part clam shell construction. Bottom half includes moulded-in standoffs for easy PC board installation
• Four short M3 screws included
• Front and rear panels interchangeable and easily removable for modifications
• Designed to meet IP43
• Manufacturer's part RM2095S

These Hammond self-tapping screws can be used with many of Hammond's metal enclosures.

• 6-32 thread
• Phillips head
• 15 x 7 x 7mm
• Steel
• Natural finish
• Supplied in packs of 6
• Hammond type 1421J6

The OKW C6009161 is a four-part plastic enclosure with a seal prefitted into the top. Screw fixing is outside of the sealing area, giving ingress protection to IP66. A resessed operating area in the lid helps to protect membrane keyboards and the box includes fastening pillars for PCBs and DIN-rails. It is supplied as a base, top with prefitted seal, 2 trims and 1 assembly kit including cover retention.

• Material: ASA+PC-FR (UL 94 V-0)
• Protection class: IP 66
• Colour: light grey RAL 7035
• Standards: RoHS compliant, REACH compliant
• Length: 160mm
• Width 90mm
• Height 50mm
• PCB length, base: 121mm
• PCB width, base: 81mm
• PCB length, top: 118mm
• PCB width, top 79mm
• Keypad length: 115.2mm
• Keypad width 81.9mm
• OKW type C0669161

Economically priced, yet high quality, ABS case with removable end panels, ideally suited in height for housing modems, etc., and other single PCB equipment.

• Light grey top and base with dark grey end panels, all with matt finish
• Top and base secured by 4 self-tapping screws (supplied)
• 4 self-adhesive feet are supplied
• Dimensions 158 x 95 x 36mm
• UL-94-HB

This light grey type 2 aluminium console from the Retex Abox range is suitable for desktop applications and ideal for housing equipment such as intercoms, displays, and control units. This sloped unit has bosses for mounting PCBs.

• Suitable for mounting cards in accordance to IEC 60297 (Eurocards)
• Includes four non-slip feet
• Resistant to temperatures up to 85ºC (plastic parts)
• Lid and base made from injected high quality ABS
• 2mm thick aluminium panels
• Silver anodised finished
• Unit includes lid, base, one aluminium panel, four non-slip feet and mounting screws
• Manufacturer's part 33020102

This light grey type 3 aluminium console from the Retex Abox range is suitable for desktop applications and ideal for housing equipment such as intercoms, displays, and control units. This sloped unit has an angled panel for display purposes and bosses for mounting PCBs.

• Suitable for mounting cards in accordance to IEC 60297 (Eurocards)
• Includes four non-slip feet
• Resistant to temperatures up to 85ºC (plastic parts)
• Lid and base made from injected high quality ABS
• 2mm thick aluminium panels
• Silver anodised finished
• Unit includes lid, base, 1x aluminium panel, 4x non-slip feet and mounting screws
• Manufacturer's part 33020103

This light grey type 4 aluminium console from the Retex Abox range is suitable for desktop applications and ideal for housing equipment such as intercoms, displays, and control units. This sloped unit has slots for mounting PCBs.

• Suitable for mounting cards in accordance to IEC 60297 (Eurocards)
• Includes four non-slip feet
• Resistant to temperatures up to 85ºC (plastic parts)
• Lid and base made from injected high quality ABS
• 2mm thick aluminium panels
• Silver anodised finished
• Unit includes lid, base, 2x aluminium panels, 4x non-slip feet and mounting screws
• Manufacturer's part 33020104

The Retex 33030002 Elbox Instrument Case Grey 145 x 170 x 56mm has been designed with an anodised aluminium front and rear panel, manufactured to professional standards.

This quality enclosure is particularly useful for mounting Eurocard sized PCBs according to IEC 60297, while the PCB supports included are able to support standard Eurocard sized boards. The graphite grey ABS top and base screw together around the chassis/front and rear panel assembly.

The Retex 33030003 Elbox Instrument Case Grey 180.5 x 232.5 x 77mm has been designed with an anodised aluminium front and rear panel, manufactured to professional standards.

This quality enclosure is particularly useful for mounting Eurocard sized PCBs according to IEC 60297, while the PCB supports included are able to support standard Eurocard sized boards. The graphite grey ABS top and base screw together around the chassis/front and rear panel assembly.

The R-TECH Modem Case ABS Grey is a high quality, economically priced case manufactured from ABS plastic.

The case features removable end panels, card slot guides along the fixed sides and PCB stand-offs in the base.Four vertical slot card guides are provided at 21mm and 42mm intervals along the fixed sides of the case, to allow vertical mounting of PCBs or the creation of internal compartments.The top and base are secured together using four self-tapping screws (supplied).The enclosure provides ingress protection to IEC 60529, IP40 with a flammability rating of UL94-HB.

Ideally suited to housing single PCB equipment or similar applications.

• Light Grey with Dark Grey end panels
• Length: 158mm
• Width: 95mm
• Height: 36mm
• 4 x Screw Fixings supplied
• 4 x Self-adhesive Feet supplied

The R-TECH ABS Instrument Case, moulded from Dark Grey plastic is a high quality, economically priced, small enclosure, designed to be suitable for various projects.

The case features removable end panels and is secured together using the two screws provided. The internal design includes moulded PCB stand-offs and vertical card slot guides inside the side panels, allowing for horizontal or vertical PCB mounting. Threaded brass inserts, provided in the base allow repeated assembly and disassembly.The enclosure provides ingress protection to IEC 60529, IP40 with a flammability rating of UL94,V-0.

Ideally suited to housing test equipment, instrumentation, or similar applications.

• Dark Grey case
• Light Grey end panels
• Length: 140mm
• Width: 110mm
• Height: 35mm
• 2 x Screw Fixings supplied

The R-TECH ABS Instrument Case, moulded from Light Grey plastic is a high quality, economically priced enclosure, designed to be suitable for various projects.

The case features removable aluminium end panels and is secured together using the four screws provided. The internal design includes moulded PCB stand-offs and vertical card slot guides inside the side panels, allowing for horizontal or vertical PCB mounting. Threaded brass inserts, provided in the base allow repeated assembly and disassembly.The enclosure provides ingress protection to IEC 60529, IP40 with a flammability rating of UL94-HB.

Ideally suited to housing test equipment, instrumentation, or similar applications.

• Light Grey
• Removable Aluminium end panels
• Length: 300mm
• Width: 200mm
• Height: 75mm
• 4 x Screw Fixings supplied
• 4 x Self-adhesive Feet supplied

The R-TECH ABS Instrument Case, moulded from Light Grey plastic is a high quality, economically priced enclosure, designed to be suitable for various projects.

The case features removable aluminium end panels, ventilation slots and is secured together using the four screws provided. The internal design includes moulded PCB stand-offs and vertical card slot guides inside the side panels, allowing for horizontal or vertical PCB mounting. Threaded brass inserts, provided in the base allow repeated assembly and disassembly.The enclosure provides ingress protection to IEC 60529, IP20 with a flammability rating of UL94-HB.

Ideally suited to housing test equipment, instrumentation, or similar applications.

• Light Grey
• Removable Aluminium end panels
• Ventilation slots
• Length: 300mm
• Width: 200mm
• Height: 75mm
• 4 x Screw Fixings supplied
• 4 x Self-adhesive Feet supplied

Dark grey comms box from Takachi's 92 Series with a stylish design. Manufactured with ABS plastic case and double detachable panels, making it suitable for Wi-Fi access points, measuring equipment, controller and communication applications. The plastic housing is also equipped with built-in bosses for PCB mounting.

• IP40 rated
• Operating temperature: -10°C to +60°C
• Size: 1
• 200 x 200 x 40mm (L x W x H)
• Manufacturer's part CDE9207DG