Sloped aluminium enclosure from the Hammond 1456 series with a textured blue base and a beige top.

• Dimensions (W x D) 508 x 265mm
• Height 107mm (rear)
• Slope (rear to front) 30°
• Cases made from 2mm thick aluminium
• Vents on rear and bottom
• Supplied pre-assembled with self adhesive rubber feet and mounting hardware
• Rated at IP31
• Manufacturer's part 1456WK4WHBU

Sloped aluminium enclosure from the Hammond 1456 series with a textured blue base and a black top panel.

• Dimensions (W x D) 508 x 293mm
• Height 94mm (rear)
• Slope (rear to front) 10°
• Cases made from 2mm thick aluminium
• Vents on rear and bottom
• Supplied pre-assembled with self adhesive rubber feet and mounting hardware
• Rated at IP31
• Manufacturer's part 1456WL1BKBU

Sloped aluminium enclosure from the Hammond 1456 series with a textured blue base and a beige top.

• Dimensions (W x D) 508 x 293mm
• Height 94mm (rear)
• Slope (rear to front) 10°
• Cases made from 2mm thick aluminium
• Vents on rear and bottom
• Supplied pre-assembled with self adhesive rubber feet and mounting hardware
• Rated at IP31
• Manufacturer's part 1456WL1WHBU

Sloped aluminium enclosure from the Hammond 1456 series with a textured blue base and a black top panel.

• Dimensions (W x D) 508 x 293mm
• Height 81mm (rear)
• Slope (rear to front) 15°
• Cases made from 2mm thick aluminium
• Vents on rear and bottom
• Supplied pre-assembled with self adhesive rubber feet and mounting hardware
• Rated at IP31
• Manufacturer's part 1456WL3BKBU

Sloped aluminium enclosure from the Hammond 1456 series with a textured blue base and a beige top.

• Dimensions (W x D) 508 x 293mm
• Height 81mm (rear)
• Slope (rear to front) 15°
• Cases made from 2mm thick aluminium
• Vents on rear and bottom
• Supplied pre-assembled with self adhesive rubber feet and mounting hardware
• Rated at IP31
• Manufacturer's part 1456WL3WHBU

Hand-held Instrument enclosure made from black ABS material, 75mm length, 74mm width, 27mm height.

• Moulded in black ABS plastic
• UL-94HB flame resistance rating
• Designed to meet IP54 rating
• Satin texture finish
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping screws
• Ideally suited for mounting printed circuit boards
• Hammond type 1593ARBK

Hand-held Instrument enclosure made from grey ABS material, 75mm length, 74mm width, 27mm height.

• Moulded in grey ABS plastic
• UL-94HB flame resistance rating
• Designed to meet IP54 rating
• Satin texture finish
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping screws
• Ideally suited for mounting printed circuit boards
• Hammond type 1593ARGY

Hand-held Instrument enclosure made from translucent blue ABS material, 75mm length, 74mm width, 27mm height.

• Moulded in translucent blue ABS plastic
• UL-94HB flame resistance rating
• Designed to meet IP54 rating
• Satin texture finish
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping screws
• Ideally suited for mounting printed circuit boards
• Hammond type 1593ARTBU

Hand-held Instrument enclosure made from black ABS material, 95mm length, 77mm width, 30mm height.

• Moulded in black ABS plastic
• UL-94HB flame resistance rating
• Ergonomically designed for a comfortable fit into the user's hand
• Satin texture finish
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping screws
• Ideally suited for mounting printed circuit boards
• Hammond type 1593BBBK

Hand-held Instrument enclosure made from grey ABS material, 95mm length, 77mm width, 30mm height.

• Moulded in grey ABS plastic
• UL-94HB flame resistance rating
• Ergonomically designed for a comfortable fit into the user's hand
• Satin texture finish
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping screws
• Ideally suited for mounting printed circuit boards
• Hammond type 1593BBGY

Hand-held Instrument enclosure made from translucent blue ABS material, 95mm length, 77mm width, 30mm height.

• Moulded in translucent blue ABS plastic
• UL-94HB flame resistance rating
• Ergonomically designed for a comfortable fit into the user's hand
• Satin texture finish
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping screws
• Ideally suited for mounting printed circuit boards
• Hammond type 1593BBTBU

Hand-held black instrument enclosure from the Hammond 1593 series, 114mm in length, 36mm wide and 25mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593DBK

Hand-held grey instrument enclosure from the Hammond 1593 series, 114mm in length, 36mm wide and 25mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593DGY

Infrared panels for use with the Hammond 1593 Series (36 x 25mm ends).

• Pack of 10
• Translucent red

Hand-held blue instrument enclosure from the Hammond 1593 series, 114mm in length, 36mm wide and 25mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from blue ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593DTBU

Hand-held black instrument enclosure from the Hammond 1593 series, 66mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593JBK

Hand-held black instrument enclosure from the Hammond 1593 series, 66mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593JGY

Buy Hammond instrument enclosure black 66 x 66 x 28 (1593KBK) - a hand-held black instrument enclosure from the Hammond 1593 series, 66mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593KBK

Hand-held grey instrument enclosure from the Hammond 1593 series, 66mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593KGY

Hand-held black instrument enclosure from the Hammond 1593 series, 92mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593LBK

Hand-held grey instrument enclosure from the Hammond 1593 series, 92mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593LGY

Hand-held black instrument enclosure from the Hammond 1593 series, 110mm in length, 75mm wide and 25mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593NBK

Hand-held grey instrument enclosure from the Hammond 1593 series, 110mm in length, 75mm wide and 25mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593NGY

Hand-held blacky instrument enclosure from the Hammond 1593 series, 92mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593PBK

Hand-held grey instrument enclosure from the Hammond 1593 series, 92mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593PGY

Hammond Infrared Panels for use with the Hammond 1593 Series (66 x 28mm ends).

• Pack of 10
• Translucent red

Hand-held black instrument enclosure from the Hammond 1593 series, 112mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593QBK

Hand-held grey instrument enclosure from the Hammond 1593 series, 112mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593QGY

Hand-held black instrument enclosure from the Hammond 1593 series, 92mm in length, 66mm wide and 218mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593SBK

Hand-held grey instrument enclosure from the Hammond 1593 series, 92mm in length, 66mm wide and 21mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593SGY

Hand-held blue instrument enclosure from the Hammond 1593 series, 92mm in length, 66mm wide and 21mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from blue ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593STBU

Hand-held black instrument enclosure from the Hammond 1593 series, 112mm in length, 66mm wide and 21mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593TBK

Hand-held grey instrument enclosure from the Hammond 1593 series, 112mm in length, 66mm wide and 21mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593TGY

Hand-held blue instrument enclosure from the Hammond 1593 series, 112mm in length, 66mm wide and 21mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from blue ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593TTBU

Hand-held black instrument enclosure from the Hammond 1593 series, 140mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593XBK

Hand-held grey instrument enclosure from the Hammond 1593 series, 140mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593XGY

Hand-held blue instrument enclosure from the Hammond 1593 series, 140mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• Two removable panels
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from blue ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593XTBU

Hand-held black instrument enclosure from the Hammond 1593 series, 140mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from black ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593YBK

Hand-held grey instrument enclosure from the Hammond 1593 series, 140mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panel and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from grey ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593YGY

Hand-held blue instrument enclosure from the Hammond 1593 series, 140mm in length, 66mm wide and 28mm high. Ergonomically designed for a comfortable fit into the user's hand, this enclosure has a recessed top for membrane display. The unit is secured with self-tapping screws, and is ideally suited for mounting printed circuit boards.

• One removable panels and battery compartment
• Lap joint construction provides protection against dust accumulation and splashing water
• Made from blue ABS plastic material with UL-94HB flame resistance rating
• Lid and box both contain moulded in PC board standoffs for easy mounting of boards
• Designed to meet IP54
• Hammond part 1593TBU

Instrument enclosure from the Hammond 1598 series made from black flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 157 x 94 x 36mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598ABK

Instrument enclosure from the Hammond 1598 series made from grey flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 157 x 94 x 36mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598AGY

Instrument enclosure from the Hammond 1598 series made from grey ABS plastic, ideal for mounting PCBs.

• Dimensions 157 x 94 x 36mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598ASGY

Economical, low profile grey ABS instrument case from Hammond with removable end panels. The panels are moulded in black ABS for easy drilling and cutting.

• Size 157 x 94 x 36mm
• Matt textured finish
• Slots and bosses provided for PCB mounting on Eurocard centres
• Two tongued and grooved halves of the case held together by self-tapping screws, (supplied)
• Ideal for light duty applications when repeated opening and closing is not essential
• Designed to meet IP54
• Hammond part 1598ASGYPBK

Instrument enclosure from the Hammond 1598 series made from black flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 179 x 154 x 36mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598BBBK

Instrument enclosure from the Hammond 1598 series made from grey flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 179 x 154 x 36mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598BBGY

Instrument enclosure from the Hammond 1598 series made from black flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 134 x 135 x 50mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598BBK

Instrument enclosure from the Hammond 1598 series made from grey ABS plastic, ideal for mounting PCBs.

• Dimensions 179 x 154 x 36mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598BBSGY

Instrument enclosure from the Hammond 1598 series made from grey flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 134 x 135 x 50mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598BGY

Instrument enclosure from the Hammond 1598 series made from grey ABS plastic, ideal for mounting PCBs.

• Dimensions 134 x 135 x 50mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598BSGY