Instrument enclosure from the Hammond 1598 series made from black flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 180 x 155 x 52mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598CBK

Instrument enclosure from the Hammond 1598 series made from grey flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 180 x 155 x 52mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598CGY

Instrument enclosure from the Hammond 1598 series made from grey ABS plastic, ideal for mounting PCBs.

• Dimensions 180 x 155 x 52mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598CSGY

Economical, low profile grey ABS instrument case from Hammond with removable end panels. The panels are moulded in black ABS for easy drilling and cutting.

• Size 178 x 152 x 51mm
• Matt textured finish
• Slots and bosses provided for PCB mounting on Eurocard centres
• Two tongued and grooved halves of the case held together by self-tapping screws, (supplied)
• Ideal for light duty applications when repeated opening and closing is not essential
• Designed to meet IP54
• Hammond part 1598CSGYPBK

Instrument enclosure from the Hammond 1598 series made from black flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 180 x 206 x 64mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598DBK

Instrument enclosure from the Hammond 1598 series made from grey flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 180 x 206 x 64mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598DGY

Instrument enclosure from the Hammond 1598 series made from grey ABS plastic, ideal for mounting PCBs.

• Dimensions 180 x 206 x 64mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598DSGY

Instrument enclosure from the Hammond 1598 series made from black flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 160 x 160 x 86mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598EBK

Instrument enclosure from the Hammond 1598 series made from grey flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 160 x 160 x 86mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598EGY

Instrument enclosure from the Hammond 1598 series made from grey ABS plastic, ideal for mounting PCBs.

• Dimensions 160 x 160 x 86mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598ESGY

Instrument enclosure from the Hammond 1598 series made from black flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 250 x 160 x 40mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598FBK

Instrument enclosure from the Hammond 1598 series made from grey flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 250 x 160 x 40mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598FGY

Instrument enclosure from the Hammond 1598 series made from grey ABS plastic, ideal for mounting PCBs.

• Dimensions 250 x 160 x 40mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598FSGY

Economical, low profile grey ABS instrument case from Hammond with removable end panels. The panels are moulded in black ABS for easy drilling and cutting.

• Size 250 x 160 x 40mm
• Matt textured finish
• Slots and bosses provided for PCB mounting on Eurocard centres
• Two tongued and grooved halves of the case held together by self-tapping screws, (supplied)
• Ideal for light duty applications when repeated opening and closing is not essential
• Designed to meet IP54
• Hammond part 1598FSGYPBK

Instrument enclosure from the Hammond 1598 series made from black flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 250 x 160 x 76mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598GBK

Instrument enclosure from the Hammond 1598 series made from grey flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 250 x 160 x 76mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598GGY

Instrument enclosure from the Hammond 1598 series made from grey ABS plastic, ideal for mounting PCBs.

• Dimensions 250 x 160 x 76mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598GSGY

Economical, low profile grey ABS instrument case from Hammond with removable end panels. The panels are moulded in black ABS for easy drilling and cutting.

• Size 250 x 160 x 76mm
• Matt textured finish
• Slots and bosses provided for PCB mounting on Eurocard centres
• Two tongued and grooved halves of the case held together by self-tapping screws, (supplied)
• Ideal for light duty applications when repeated opening and closing is not essential
• Designed to meet IP54
• Hammond part 1598GSGYPBK

Instrument enclosure from the Hammond 1598 series made from black flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 280 x 200 x 40mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598HBK

Instrument enclosure from the Hammond 1598 series made from grey flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 280 x 200 x 40mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598HGY

Instrument enclosure from the Hammond 1598 series made from grey ABS plastic, ideal for mounting PCBs.

• Dimensions 280 x 200 x 40mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598HSGY

Economical, low profile grey ABS instrument case from Hammond with removable end panels. The panels are moulded in black ABS for easy drilling and cutting.

• Size 280 x 200 x 40mm
• Matt textured finish
• Slots and bosses provided for PCB mounting on Eurocard centres
• Two tongued and grooved halves of the case held together by self-tapping screws, (supplied)
• Ideal for light duty applications when repeated opening and closing is not essential
• Designed to meet IP54
• Hammond part 1598HSGYPBK

Instrument enclosure from the Hammond 1598 series made from black flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 280 x 200 x 76mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598JBK

Instrument enclosure from the Hammond 1598 series made from grey flame-retardant ABS plastic, ideal for mounting PCBs.

• Dimensions 280 x 200 x 76mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598JGY

Instrument enclosure from the Hammond 1598 series made from grey ABS plastic, ideal for mounting PCBs.

• Dimensions 280 x 200 x 76mm
• Designed to meet IP54
• Two sets of vertical 1.5mm PCB guides moulded into case halves front and rear
• Front and rear panels made from 1.6mm brushed aluminium with protective paper on one side
• Enclosure halves secured with M3 Phillips machine screws threaded into tapped integral brass bushings
• Perfect for use in applications where repetitive assembly and disassembly are required
• Integral horizontal PC card mounts on Eurocard centres
• Manufacturer's part 1598JSGY

Economical, low profile grey ABS instrument case from Hammond with removable end panels. The panels are moulded in black ABS for easy drilling and cutting.

• Size 280 x 200 x 76mm
• Matt textured finish
• Slots and bosses provided for PCB mounting on Eurocard centres
• Two tongued and grooved halves of the case held together by self-tapping screws, (supplied)
• Ideal for light duty applications when repeated opening and closing is not essential
• Designed to meet IP54
• Hammond part 1598JSGYPBK

Moulded from tough nylon, this black belt clip can be added to a Hammond 1599 series enclosure, or other small enclosure, allowing it to be secured to a belt, pocket or bag.

• Colour: black
• Includes 2 nylon screws (insulated to avoid internal interference)
• Supplied with mounting template
• Overall dimensions: 48 x 29 x 10mm
• Hammond type 1599CLIP

Moulded from tough nylon, this grey belt clip can be added to a Hammond 1599 series enclosure, or other small enclosure, allowing it to be secured to a belt, pocket or bag.

• Colour: grey
• Includes 2 nylon screws (insulated to avoid internal interference)
• Supplied with mounting template
• Overall dimensions: 48 x 29 x 10mm
• Hammond type 1599CLIPGY

A sloping top console style enclosure from Hammond's 1599T series, moulded in general-purpose ABS plastic.

• Dimensions: Depth (front to rear) x Width: 86 x 170mm
• Height: rear / front: 34 / 19mm
• Colour: grey
• 'Short', 'landscape' slope
• Flame rating UL94-HB
• Rear of case contains 1 flat removable panel for easy modifications
• Case halves secured by self-tapping screws
• PCB standoffs on the inside top and bottom
• Hammond type 1599ESTSGY

A sloping top console style enclosure from Hammond's 1599T series, moulded in flame-retardant ABS plastic.

• Dimensions: Depth (front to rear) x Width: 86 x 170mm
• Height: rear / front: 34 / 19mm
• Colour: black
• 'Short', 'landscape' slope
• UL flammability rating 94V-0
• Rear of case contains 1 flat removable panel for easy modifications
• Case halves secured by machine screws into brass bushings
• PCB standoffs on the inside top and bottom
• Hammond type 1599ETSBK

A sloping top console style enclosure from Hammond's 1599T series, moulded in flame-retardant ABS plastic.

• Dimensions: Depth (front to rear) x Width: 86 x 170mm
• Height: rear / front: 34 / 19mm
• Colour: grey
• 'Short', 'landscape' slope
• UL flammability rating 94V-0
• Rear of case contains 1 flat removable panel for easy modifications
• Case halves secured by machine screws into brass bushings
• PCB standoffs on the inside top and bottom
• Hammond type 1599ETSGY

A sloping top console style enclosure from Hammond's 1599T series, moulded in flame-retardant ABS plastic.

• Dimensions: Depth (front to rear) x Width: 110 x 220mm
• Height: rear / front: 40 / 19mm
• Colour: black
• 'Short', 'landscape' slope
• UL flammability rating 94V-0
• Rear of case contains 2 flat removable panels for easy modifications
• Case halves secured by machine screws into brass bushings
• PCB standoffs on the inside top and bottom
• Hammond type 1599HTSBK

A sloping top console style enclosure from Hammond's 1599T series, moulded in flame-retardant ABS plastic.

• Dimensions: Depth (front to rear) x Width: 110 x 220mm
• Height: rear / front: 40 / 19mm
• Colour: grey
• 'Short', 'landscape' slope
• UL flammability rating 94V-0
• Rear of case contains 2 flat removable panels for easy modifications
• Case halves secured by machine screws into brass bushings
• PCB standoffs on the inside top and bottom
• Hammond type 1599HTSGY

A sloping top console style enclosure from Hammond's 1599T series, moulded in general-purpose ABS plastic.

• Dimensions: Depth (front to rear) x Width: 220 x 140mm
• Height: rear / front: 41 / 18mm
• Colour: grey
• 'Long', 'portrait' slope
• Flame rating UL94-HB
• Rear of case contains 1 flat removable panel for easy modifications
• Case halves secured by self-tapping screws
• PCB standoffs on the inside top and bottom
• Hammond type 1599KSTLGY

A sloping top console style enclosure from Hammond's 1599T series, moulded in general-purpose ABS plastic.

• Built-in battery compartment
• Dimensions: Depth (front to rear) x Width: 220 x 140mm
• Height: rear / front: 41 / 18mm
• Colour: grey
• 'Long', 'portrait' slope
• Flame rating UL94-HB
• Rear of case contains 1 flat removable panel for easy modifications
• Case halves secured by self-tapping screws
• PCB standoffs on the inside top and bottom
• Hammond type 1599KSTLGYBAT

A sloping top console style enclosure from Hammond's 1599T series, moulded in general-purpose ABS plastic.

• Dimensions: Depth (front to rear) x Width: 140 x 220mm
• Height: rear / front: 46 / 21mm
• Colour: grey
• 'Short', 'landscape' slope
• Flame rating UL94-HB
• Rear of case contains 2 flat removable panels for easy modifications
• Case halves secured by self-tapping screws
• PCB standoffs on the inside top and bottom
• Hammond type 1599KSTSGY

A sloping top console style enclosure from Hammond's 1599T series, moulded in flame-retardant ABS plastic.

• Dimensions: Depth (front to rear) x Width: 220 x 140mm
• Height: rear / front: 41 / 18mm
• Colour: black
• 'Long', 'portrait' slope
• UL flammability rating 94V-0
• Rear of case contains 1 flat removable panel for easy modifications
• Case halves secured by machine screws into brass bushings
• PCB standoffs on the inside top and bottom
• Hammond type 1599KTLBK

A sloping top console style enclosure from Hammond's 1599T series, moulded in flame-retardant ABS plastic.

• Built-in battery compartment
• Dimensions: Depth (front to rear) x Width: 220 x 140mm
• Height: rear / front: 41 / 18mm
• Colour: black
• 'Long', 'portrait' slope
• UL flammability rating 94V-0
• Rear of case contains 1 flat removable panel for easy modifications
• Case halves secured by machine screws into brass bushings
• PCB standoffs on the inside top and bottom
• Hammond type 1599KTLBKBAT

A sloping top console style enclosure from Hammond's 1599T series, moulded in flame-retardant ABS plastic.

• Dimensions: Depth (front to rear) x Width: 220 x 140mm
• Height: rear / front: 41 / 18mm
• Colour: grey
• 'Long', 'portrait' slope
• UL flammability rating 94V-0
• Rear of case contains 1 flat removable panel for easy modifications
• Case halves secured by machine screws into brass bushings
• PCB standoffs on the inside top and bottom
• Hammond type 1599KTLGY

A sloping top console style enclosure from Hammond's 1599T series, moulded in flame-retardant ABS plastic.

• Built-in battery compartment
• Dimensions: Depth (front to rear) x Width: 220 x 140mm
• Height: rear / front: 41 / 18mm
• Colour: grey
• 'Long', 'portrait' slope
• UL flammability rating 94V-0
• Rear of case contains 1 flat removable panel for easy modifications
• Case halves secured by machine screws into brass bushings
• PCB standoffs on the inside top and bottom
• Hammond type 1599KTLGYBAT

A sloping top console style enclosure from Hammond's 1599T series, moulded in flame-retardant ABS plastic.

• Dimensions: Depth (front to rear) x Width: 140 x 220mm
• Height: rear / front: 46 / 21mm
• Colour: black
• 'Short', 'landscape' slope
• UL flammability rating 94V-0
• Rear of case contains 2 flat removable panels for easy modifications
• Case halves secured by machine screws into brass bushings
• PCB standoffs on the inside top and bottom
• Hammond type 1599KTSBK

A sloping top console style enclosure from Hammond's 1599T series, moulded in flame-retardant ABS plastic.

• Dimensions: Depth (front to rear) x Width: 140 x 220mm
• Height: rear / front: 46 / 21mm
• Colour: grey
• 'Short', 'landscape' slope
• UL flammability rating 94V-0
• Rear of case contains 2 flat removable panels for easy modifications
• Case halves secured by machine screws into brass bushings
• PCB standoffs on the inside top and bottom
• Hammond type 1599KTSGY

This hand held tablet-style enclosure from the Hammond 1599TAB Series is made from black flame retardant ABS plastic.

• Size 120 x 95 x 27mm
• Colour: black
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50mm)
• Enclosure is assembled with four M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Manufacturer's part no 1599TABSBK

This hand held tablet-style enclosure from the Hammond 1599TAB Series is made from black flame retardant ABS plastic and has a battery compartment and door.

• Size 120 x 95 x 27mm
• Colour: black
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50mm)
• Enclosure is assembled with four M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Battery compartment includes 8 battery clips for 4x AA batteries and 2x 9V PP3 clips
• Manufacturer's part no. 1599TABSBKBAT

This hand held tablet-style enclosure from the Hammond 1599TAB Series is made from grey flame retardant ABS plastic.

• Size 120 x 95 x 27mm
• Colour: grey
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50mm)
• Enclosure is assembled with four M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Manufacturer's part no 1599TABSGY

This hand held tablet-style enclosure from the Hammond 1599TAB Series is made from grey flame retardant ABS plastic and has a battery compartment and door.

• Size 120 x 95 x 27mm
• Colour: grey
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50mm)
• Enclosure is assembled with four M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Battery compartment includes 8 battery clips for 4x AA batteries and 2x 9V PP3 clips
• Manufacturer's part no. 1599TABSGYBAT

A sloped steel / aluminium enclosure from the Hammond 500 series. The enclosure has a steel base, including the rear panel, and side ventilation slots. The top panel is made from aluminium.

• Size (width x depth): 178 x 178mm
• Rear height: 54mm
• Front height: 30mm
• Slope angle 15°
• 18 gauge steel base and rear panel for extra strength
• 1.6mm thick aluminium top panel
• Sides include vertical rows of ventilation slots
• Two-tone grey powder paint finish
• Base is dark satin grey
• Sloping top is smooth light grey
• Supplied complete with 4 self-adhesive rubber feet and required hardware
• Hammond type 500-0930

A sloped steel / aluminium enclosure from the Hammond 500 series. The enclosure has a steel base, including the rear panel, and side ventilation slots. The top panel is made from aluminium.

• Size (width x depth): 193 x 178mm
• Rear height: 96mm
• Front height: 73mm
• Slope angle 15°
• 18 gauge steel base and rear panel for extra strength
• 1.6mm thick aluminium top panel
• Sides include vertical rows of ventilation slots
• Two-tone grey powder paint finish
• Base is dark satin grey
• Sloping top is smooth light grey
• Supplied complete with 4 self-adhesive rubber feet and required hardware
• Hammond type 500-0940

A sloped steel / aluminium enclosure from the Hammond 500 series. The enclosure has a steel base, including the rear panel, and side ventilation slots. The top panel is made from aluminium.

• Size (width x depth): 297 x 199mm
• Rear height: 54mm
• Front height: 30mm
• Slope angle 15°
• 18 gauge steel base and rear panel for extra strength
• 1.6mm thick aluminium top panel
• Sides include vertical rows of ventilation slots
• Two-tone grey powder paint finish
• Base is dark satin grey
• Sloping top is smooth light grey
• Supplied complete with 4 self-adhesive rubber feet and required hardware
• Hammond type 500-0950

A rugged steel instrument enclosure from the Hammond 511 - 513 series. The enclosure has slots on each side for ventilation.

• Dimensions (W x H): 92 x 70mm
• Length top / bottom: 178 / 165mm
• 18 gauge steel base and top for extra strength
• Front & back panel will not push in
• Sides include two horizontal rows of ventilation
• Choice of sloping or vertical sides by reversing case
• Two tone grey powder coat finish
• Top is dark satin grey
• Bottom, front & back are smooth light grey
• Supplied complete with four self adhesive rubber feet and required hardware
• Hammond type 511-0900