A 12V single pole reed relay sealed in a compact single in-line epoxy package.
SIL reed relay
SPST contact
12V DC coil voltage
100V DC switching voltage
0.5A switching current
10VA switching power
1ms operate time
0.5ms release time
144mW coil power
150mR contact resistance
1000R coil resistance
SIP package
19mm long, 5mm wide, 7mm high
A range of single pole reed relay sealed in a compact single In-Line epoxy package. Suitable for a wide range of applications. Completely washable. Suitable for auto insertion. Suitable for direct interfacing with TTL logic. UL approved, SIP package.
A 12V 0.5A dry switch reed relay from the 104 series. The relay has a 10W power rating and can switch up to 1kV, with a stand-off of up to 1.5kV. The relays are designed to be utilised with voltages that are beyond the capabilities of conventional SIL reed relays. Packaged in a single-in-line case that allows for easy stacking in high density designs. The relay is 100% tested for dynamic contact resistance for guaranteed performance and feature an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. Ideal for applications such as transformer or cable testing or ATE where high voltage handling is required, including control and isolation of SCR or triac gates.
A 12V 1A dry switch reed relay from the 104 series. The relay has a 25W power rating and can switch up to 1kV, with a stand-off of up to 3kV. The relays are designed to be utilised with voltages that are beyond the capabilities of conventional SIL reed relays. Packaged in a single-in-line case that allows for easy stacking in high density designs. The relay is 100% tested for dynamic contact resistance for guaranteed performance and feature an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. Ideal for applications such as transformer or cable testing or ATE where high voltage handling is required, including control and isolation of SCR or triac gates.
A 24V 0.5A dry switch reed relay from the 104 series. The relay has a 10W power rating and can switch up to 1kV, with a stand-off of up to 1.5kV. The relays are designed to be utilised with voltages that are beyond the capabilities of conventional SIL reed relays. Packaged in a single-in-line case that allows for easy stacking in high density designs. The relay is 100% tested for dynamic contact resistance for guaranteed performance and feature an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. Ideal for applications such as transformer or cable testing or ATE where high voltage handling is required, including control and isolation of SCR or triac gates.
A 24V 1A dry switch reed relay from the 104 series. The relay has a 25W power rating and can switch up to 1kV, with a stand-off of up to 3kV. The relays are designed to be utilised with voltages that are beyond the capabilities of conventional SIL reed relays. Packaged in a single-in-line case that allows for easy stacking in high density designs. The relay is 100% tested for dynamic contact resistance for guaranteed performance and feature an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. Ideal for applications such as transformer or cable testing or ATE where high voltage handling is required, including control and isolation of SCR or triac gates.
A 5V 0.5A dry switch reed relay from the 104 series. The relay has a 10W power rating and can switch up to 1kV, with a stand-off of up to 1.5kV. The relays are designed to be utilised with voltages that are beyond the capabilities of conventional SIL reed relays. Packaged in a single-in-line case that allows for easy stacking in high density designs. The relay is 100% tested for dynamic contact resistance for guaranteed performance and feature an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. Ideal for applications such as transformer or cable testing or ATE where high voltage handling is required, including control and isolation of SCR or triac gates.
A 5V 1A dry switch reed relay from the 104 series. The relay has a 25W power rating and can switch up to 1kV, with a stand-off of up to 3kV. The relays are designed to be utilised with voltages that are beyond the capabilities of conventional SIL reed relays. Packaged in a single-in-line case that allows for easy stacking in high density designs. The relay is 100% tested for dynamic contact resistance for guaranteed performance and feature an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. Ideal for applications such as transformer or cable testing or ATE where high voltage handling is required, including control and isolation of SCR or triac gates.
A 12V 0.5A dry double switch reed relay from the 104 series. The relay has a 10W power rating and can switch up to 1kV, with a stand-off of up to 1.5kV. The relays are designed to be utilised with voltages that are beyond the capabilities of conventional SIL reed relays. Packaged in a single-in-line case that allows for easy stacking in high density designs. The relay is 100% tested for dynamic contact resistance for guaranteed performance and feature an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. Ideal for applications such as transformer or cable testing or ATE where high voltage handling is required, including control and isolation of SCR or triac gates.
A 24V 0.5A dry double switch reed relay from the 104 series. The relay has a 10W power rating and can switch up to 1kV, with a stand-off of up to 1.5kV. The relays are designed to be utilised with voltages that are beyond the capabilities of conventional SIL reed relays. Packaged in a single-in-line case that allows for easy stacking in high density designs. The relay is 100% tested for dynamic contact resistance for guaranteed performance and feature an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. Ideal for applications such as transformer or cable testing or ATE where high voltage handling is required, including control and isolation of SCR or triac gates.
A 5V A dry double switch reed relay from the 104 series. The relay has a 10W power rating and can switch up to 1kV, with a stand-off of up to 1.5kV. The relays are designed to be utilised with voltages that are beyond the capabilities of conventional SIL reed relays. Packaged in a single-in-line case that allows for easy stacking in high density designs. The relay is 100% tested for dynamic contact resistance for guaranteed performance and feature an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. Ideal for applications such as transformer or cable testing or ATE where high voltage handling is required, including control and isolation of SCR or triac gates.
A 12V 0.5A single-in-line reed relay from the Pickering Reed Relays 106 series. This 10W relay has a switching voltage of 200V, and its small size is designed to be stackable on an 0.2in pitch. With a superb contact resistance stability and ultra high insulation resistance, this relay is the ideal choice for automatic test equipment. The relay has an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. As a guarantee of excellent performance the relay is 100% tested for dynamic contact resistance.
A 5V 12A single-in-line reed relay from the Pickering Reed Relays 106 series. This 10W relay has a switching voltage of 200V, and its small size is designed to be stackable on an 0.2in pitch. With a superb contact resistance stability and ultra high insulation resistance, this relay is the ideal choice for automatic test equipment. The relay has an internal mu-metal magnetic screen that eliminates problems encountered due to magnetic interaction when closely stacking relays. As a guarantee of excellent performance the relay is 100% tested for dynamic contact resistance.
A 5V 0.25A reed relay with double changeover contacts. The relay is supplied in a mini-SIL package that can stack on a 0.2in pitch, making it ideal for high density mounting applications. The relay uses the highest quality instrument grade switches, and is encapsulated in a patented mu-metal can that ensures virtually total magnetic screening - vital when high density mounting. The relay has an ultra high insulation resistance, and as a guarantee of excellent performance, is 100% tested for dynamic contact resistance. All the performance and features make this device ideal for use in high quality instrumentation.
This reed relay is from the Pickering Reed Relays 109 series, and is a double reed switch with a 5V coil voltage and 200V switching voltage. The relay comes in a mu-metal package that provides magnetic screening when used in a high density packaging design. The relay can be stacked on a 0.15 x 0.6in pitch and allows up to 80% more relays on a PCB compared to 0.2 x 0.8in devices. Ideal for high density applications such as ATE switching matrices or where board space is tight.
This reed relay is from the Pickering Reed Relays 109 series, and is a single reed switch with a 5V coil voltage and 200V switching voltage. The relay comes in a plastic package that stacks on a 0.15 x 0.6in pitch and allows up to 80% more relays on a PCB compared to 0.2 x 0.8in devices. Ideal for high density applications such as ATE switching matrices or where board space is tight.
This reed relay is from the Pickering Reed Relays 109 series, and is a coaxial single reed switch with a characteristic impedance of 50Ω, for use in RF circuits up to 2GHz. The relay has a 5V coil voltage and 200V switching voltage and comes in a mu-metal package that provides magnetic screening when used in a high density packaging design. The relay can be stacked on a 0.15 x 0.6in pitch and allows up to 80% more relays on a PCB compared to 0.2 x 0.8in devices. Ideal for telecomms, video or high speed digital switching up to 500Mbits/sec.
A 0.5A 10W reed relay from the Pickering Reed Relays 112 series. The unique design of this relay, where the reed switch is mounted diagonally within the package, means that the device requires a board footprint of only 0.15 x 0.4in, yet still retains the 0.5A 10W rating associated with larger relays. The plastic SIL package has an internal mu-metal magnetic screen that eliminates magnetic interference when relays are stacked in high density designs. Only the highest quality instrument grade switches are used in the construction, and the 5V 500Ω coil can be driven directly from TTL devices. Ideal for high density card-based systems and ATE.
This 0.5A 10W reed relay from the Pickering Reed Relays 15 series is constructed in such a way as to take up the minimum of board area, requiring only 0.15 x 0.27in, one quarter of the industry standard 0.2 x 0.8in, saving board space and making the relay suitable for very high density designs, and even making it possible to extend functionality of existing designs without increasing the size of PCB. The relay is encapsulated in a plastic SIL package and has an internal mu-metal magnetic screen that eliminates magnetic interference when relays are stacked in high density designs. Only the highest quality instrument grade switches are used in the construction. Ideal for very high density card-based systems and ATE.
This 0.5A 5W relay is from the Pickering Reed Relays 117 series and comes in a plastic SIL package with an extremely small footprint that takes up the minimum amount of board area, making it ideal for very high density designs, and even making it possible to extend the functionality of existing designs without increasing the size of the PCB. The relay is encapsulated in a plastic SIL package and has an internal mu-metal magnetic screen that eliminates magnetic interference when relays are stacked in high density designs. Only the highest quality instrument grade switches are used in the construction. Ideal for low level or 'cold' switching applications in ATE switching matrices or multiplexers.
A 5V 10W reed relay from the Pickering Reed Relays 119 Series. The relay comes in a very small micro-SIL package and the device is intended for use with voltages much higher than standard small SIL relays. Constructed using a vacuumed, sputtered ruthenium reed switch which also has superb low level performance, making it ideal for use where a wide range of signals are involved. The extremely small footprint takes up a minimum amount of board area, making the relay ideal for very high density designs. The relay has an internal mu-metal magnetic screen that eliminates magnetic interference when relays are stacked in high density designs. Only the highest quality instrument grade switches are used in the construction. Ideal for cable testers, mixed signal testers or other applications that require high voltage capability.
A 5V 10W reed relay from the Pickering Reed Relays 119 Series. The relay comes in a very small micro-SIL package and the device is intended for use with voltages much higher than standard small SIL relays. Constructed using a vacuumed, sputtered ruthenium reed switch which also has superb low level performance, making it ideal for use where a wide range of signals are involved. The extremely small footprint takes up a minimum amount of board area, making the relay ideal for very high density designs. The relay has an internal mu-metal magnetic screen that eliminates magnetic interference when relays are stacked in high density designs. Only the highest quality instrument grade switches are used in the construction. Ideal for cable testers, mixed signal testers or other applications that require high voltage capability.
A 5V 10W reed relay from the Pickering Reed Relays 119 Series. The relay comes in a very small micro-SIL package and the device is intended for use with voltages much higher than standard small SIL relays. Constructed using a vacuumed, sputtered ruthenium reed switch which also has superb low level performance, making it ideal for use where a wide range of signals are involved. The extremely small footprint takes up a minimum amount of board area, making the relay ideal for very high density designs. The relay has an internal mu-metal magnetic screen that eliminates magnetic interference when relays are stacked in high density designs. Only the highest quality instrument grade switches are used in the construction. Ideal for cable testers, mixed signal testers or other applications that require high voltage capability.
A 0.5A 5V 10W reed relay from the Pickering Reed Relays 120 series. This relay has a design that gives it an extremely small footprint of just 4mm², making it ideal for extremely high density PCB applications. An internal mu-metal magnetic screen eliminates magnetic interference when relays are stacked in high density designs, and the usage of high quality components and materials and the high standard of construction ensures that the relay will give long and reliable service. Perfect for use in ATE switching matrices or multiplexers.
The Pickering Series 122 reed relay range are ultra-high density 4mm² reed relays that take up the minimum board area, allowing high packing density. The relays have sputtered ruthenium contacts that give a switch rating of 0.5A at 10W. Fast operate and release times make these relays ideal for high speed test systems, such as A.T.E. switching matrices or multiplexers.
Coil voltage 3V
10W, 0.5A Switching
1 Form A (SPST) Normally Open (NO) energize to make
The Pickering Series 122 reed relay range are ultra-high density 4mm² reed relays that take up the minimum board area, allowing high packing density. The relays have sputtered ruthenium contacts that give a switch rating of 0.5A at 10W. Fast operate and release times make these relays ideal for high speed test systems, such as A.T.E. switching matrices or multiplexers.
Coil voltage 5V
10W, 0.5A Switching
1 Form A (SPST) Normally Open (NO) energize to make
The Pickering Series 124 reed relay range are ultra-high density 4mm² reed relays that take up the minimum board area, allowing high packing density. The relays have sputtered ruthenium contacts that give a switch rating of 0.5A at 10W. Fast operate and release times make these relays ideal for high speed test systems, such as A.T.E. switching matrices or multiplexers.
Coil voltage 3V
5W, 0.5A Switching
1 Form A (SPST) Normally Open (NO) energize to make
The Pickering Series 124 reed relay range are ultra-high density 4mm² reed relays that take up the minimum board area, allowing high packing density. The relays have sputtered ruthenium contacts that give a switch rating of 0.5A at 10W. Fast operate and release times make these relays ideal for high speed test systems, such as A.T.E. switching matrices or multiplexers.
Coil voltage 5V
5W, 0.5A Switching
1 Form A (SPST) Normally Open (NO) energize to make
A 12V 3A high voltage dry reed relay from the Pickering Reed Relays 67 series. The relay has a 50W power rating and can switch up to 7.5kV, with a stand-off of up to 10kV. The single-in-line design produces a small package and makes it easy to arrange for high density PCB usage.
A 24V 3A high voltage dry reed relay from the Pickering Reed Relays 67 series. The relay has a 50W power rating and can switch up to 7.5kV, with a stand-off of up to 10kV. The single-in-line design produces a small package and makes it easy to arrange for high density PCB usage.
A 5V 3A high voltage dry reed relay from the Pickering Reed Relays 67 series. The relay has a 50W power rating and can switch up to 7.5kV, with a stand-off of up to 10kV. The single-in-line design produces a small package and makes it easy to arrange for high density PCB usage.
The Electronics in Meccano Circuits Shop is an affiliate of Rapid Electronics, and any purchases you make help support this website without affecting the price you pay! Any enquiries regarding products or order status should be directed to Rapid Electronics at www.rapidonline.com.