A ½ disc automatic reset type thermal switch with an opening temperature of 40°C and a closing temperature of 25°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Open on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

A ½ disc automatic reset type thermal switch with an opening temperature of 50°C and a closing temperature of 35°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Open on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

A ½ disc automatic reset type thermal switch with an opening temperature of 70°C and a closing temperature of 55°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Open on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

A ½ disc automatic reset type thermal switch with an opening temperature of 80°C and an closing temperature of 65°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Open on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

A ½ disc automatic reset type thermal switch with an opening temperature of 90°C and a closing temperature of 75°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Open on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

A ½ disc automatic reset type thermal switch with an opening temperature of 100°C and a closing temperature of 85°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Open on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

A ½ disc automatic reset type thermal switch with a closing temperature of 40°C and an opening temperature of 25°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Close on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

A ½ disc automatic reset type thermal switch with a closing temperature of 50°C and an opening temperature of 35°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Close on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

A ½ disc automatic reset type thermal switch with a closing temperature of 60°C and an opening temperature of 45°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Close on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

A ½ disc automatic reset type thermal switch with a closing temperature of 70°C and an opening temperature of 55°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Close on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

A ½ disc automatic reset type thermal switch with a closing temperature of 90°C and an opening temperature of 75°C. This compact switch is suitable for general purpose use and is ideal for industrial, commercial and domestic applications, e.g. ovens, heating units, office equipment, domestic appliances, household goods, welding machines, etc.

• Close on temperature rise
• Vertical 6.35 x 0.8mm silver Faston contacts
• Aluminium cover
• Moveable surface bracket
• Qualified to CMJ, UL, cUL, VDE, CQC

These snap-action thermal protectors are designed to provide a cost effective solution in a range of motor, transformer and lighting applications such as: battery packs, lighting fixtures, electronic circuits, heaters and automotive. The conductive bimetal construction where the bimetal carries the circuit current ensures maximum sensitivity under short circuit conditions.

• Thermal cut-out 50°C
• Snap-action design
• Quick break/quick make switching action
• High switching contact rating
• Compact and low -cost design.4x 7.5 x 15mm
• Heat resistant PBT plastic case
• Preset calibration temperature
• Suitable for vacuum impregnation processes
• Reset temperature approx 70% of response temperature
• Equipped with 2x 100mm 20AWG leads
• Pepi FC-P2D series

These snap-action thermal protectors are designed to provide a cost effective solution in a range of motor, transformer and lighting applications such as: battery packs, lighting fixtures, electronic circuits, heaters and automotive. The conductive bimetal construction where the bimetal carries the circuit current ensures maximum sensitivity under short circuit conditions.

• Thermal cut-out 50°C
• Snap-action design
• Quick break/quick make switching action
• High switching contact rating
• Compact and low -cost design.4x 7.5 x 15mm
• Heat resistant PBT plastic case
• Preset calibration temperature
• Suitable for vacuum impregnation processes
• Reset temperature approx 70% of response temperature
• Equipped with 2x 100mm 20AWG leads
• Pepi FC-P2D series

These snap-action thermal protectors are designed to provide a cost effective solution in a range of motor, transformer and lighting applications such as: battery packs, lighting fixtures, electronic circuits, heaters and automotive. The conductive bimetal construction where the bimetal carries the circuit current ensures maximum sensitivity under short circuit conditions.

• Thermal cut-out 50°C
• Snap-action design
• Quick break/quick make switching action
• High switching contact rating
• Compact and low -cost design.4x 7.5 x 15mm
• Heat resistant PBT plastic case
• Preset calibration temperature
• Suitable for vacuum impregnation processes
• Reset temperature approx 70% of response temperature
• Equipped with 2x 100mm 20AWG leads
• Pepi FC-P2D series

These snap-action thermal protectors are designed to provide a cost effective solution in a range of motor, transformer and lighting applications such as: battery packs, lighting fixtures, electronic circuits, heaters and automotive. The conductive bimetal construction where the bimetal carries the circuit current ensures maximum sensitivity under short circuit conditions.

• Snap-action design
• Quick break/quick make switching action
• High switching contact rating
• Compact and low -cost design.4x 7.5 x 15mm
• Heat resistant PBT plastic case
• Preset calibration temperature
• Suitable for vacuum impregnation processes
• Reset temperature approx 70% of response temperature
• Equipped with 2x 100mm 20AWG leads
• Pepi FC-P2D series

These snap-action thermal protectors are designed to provide a cost effective solution in a range of motor, transformer and lighting applications such as: battery packs, lighting fixtures, electronic circuits, heaters and automotive. The conductive bimetal construction where the bimetal carries the circuit current ensures maximum sensitivity under short circuit conditions.

• Thermal cut-out 50°C
• Snap-action design
• Quick break/quick make switching action
• High switching contact rating
• Compact and low -cost design.4x 7.5 x 15mm
• Heat resistant PBT plastic case
• Preset calibration temperature
• Suitable for vacuum impregnation processes
• Reset temperature approx 70% of response temperature
• Equipped with 2x 100mm 20AWG leads
• Pepi FC-P2D series

These snap-action thermal protectors are designed to provide a cost effective solution in a range of motor, transformer and lighting applications such as: battery packs, lighting fixtures, electronic circuits, heaters and automotive. The conductive bimetal construction where the bimetal carries the circuit current ensures maximum sensitivity under short circuit conditions.

• Thermal cut-out 50°C
• Snap-action design
• Quick break/quick make switching action
• High switching contact rating
• Compact and low -cost design.4x 7.5 x 15mm
• Heat resistant PBT plastic case
• Preset calibration temperature
• Suitable for vacuum impregnation processes
• Reset temperature approx 70% of response temperature
• Equipped with 2x 100mm 20AWG leads
• Pepi FC-P2D series

This Minimelt thermal cut-out employs a melt solder insert that is, via the baseplate, in direct contact with the surface being monitored. On reaching the preset temperature, the solder melts, permanently opening the electrical contacts. The device is single-use only and, when operated, must be replaced.

• Preset temperature 229°C
• Current rating 15A
• Easy mounting
• Very fast thermal response
• High holding temperature

This Minimelt thermal cut-out employs a melt solder insert that is, via the baseplate, in direct contact with the surface being monitored. On reaching the preset temperature, the solder melts, permanently opening the electrical contacts. The device is single-use only and, when operated, must be replaced.

• Preset temperature 260°C
• Current rating 15A
• Easy mounting
• Very fast thermal response
• High holding temperature

This Minimelt thermal cut-out employs a melt solder insert that is, via the baseplate, in direct contact with the surface being monitored. On reaching the preset temperature, the solder melts, permanently opening the electrical contacts. The device is single-use only and, when operated, must be replaced.

• Preset temperature 298°C
• Current rating 15A
• Easy mounting
• Very fast thermal response
• High holding temperature

This Minimelt thermal cut-out employs a melt solder insert that is, via the baseplate, in direct contact with the surface being monitored. On reaching the preset temperature, the solder melts, permanently opening the electrical contacts. The device is single-use only and, when operated, must be replaced.

• Preset temperature 318°C
• Current rating 15A
• Easy mounting
• Very fast thermal response
• High holding temperature