The Kingbright RTC-31 is a one-part clip suitable for mounting Kingbright 3mm LEDs in panels of up to 3mm.

• Fits hole diameter of 4.4mm
• Panel thickness up to 3mm
• For use with LED lamps

Note: Designed to fit Kingbright LEDs - may not fit other manufacturers LEDs.

Rapid Electronics are Kingbright's leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid's Kingbright page

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

The Kingbright RTF-1090 is an attractive push fit panel clip for 10mm LEDs in black nylon offering professional appearance at low cost. Suitable for back panel illumination, circuit board indicators and LED Indicators.

• Mounting hole 14mm diameter
• CML-IT type RTF1010

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

Buy LED Bezel Clip (Prominent) 5mm from Kingbright - a professional push fit panel clip for a 5mm LED in black nylon, manufactured in a prominent position style. Suitable for back panel illumination, circuit board indicators and LED indicators.

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

Professional push fit panel clip for a 5mm LED in black nylon, in a recessed position style. Suitable for back panel illumination, circuit board indicators and LED indicators.

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

Attractive push fit panel clip for 8mm LEDs in black nylon offering professional appearance at low cost. Suitable for back panel illumination, circuit board indicators and LED Indicators.

• Mounting hole is 12mm
• CML-IT type RTF8080

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

This chromed LED holder has an external reflector and is suitable for use with a 3mm LED.

• M6 mounting

Note: LED not supplied.

This chromed LED holder has an external reflector and is suitable for use with a 5mm LED.

• M8 mounting

Note: LED not supplied.

This chromed LED holder has an internal reflector and is suitable for use with a 3mm LED.

• M6 mounting

Note: LED not supplied.

This chromed LED holder has an internal reflector and is suitable for use with a 5mm LED.

• M8 mounting

Note: LED not supplied.

Buy 5mm Assembly LED Clip from Rapid - a panel mounting single part LED clip in a 5mm style employing a novel design enabling the user to mount the LED assembly from front or rear. Black Samporene Material.

• Panel cut-out 8mm
• Maximum panel thickness 1.2mm
• Manufactured in black samporene

A novel LED connector, with 200mm pre-stripped and tinned leads.

The connector simply clips to the rear of a panel- mounted LED and is retained in position by a patented clamping device.

• Wire size: 26AWG
• Suitable for use with all LEDs with leads on a 2.54mm pitch
• Significantly reduces panel assembly time
• Dimensions 14.5 x 2.6mm
• Moulded in Toray
• UL 94V-0 rating

A novel LED connector, with 200mm pre-stripped and tinned leads.

The connector simply clips to the rear of a panel- mounted LED and is retained in position by a patented clamping device.

• Wire size: 22AWG
• Suitable for use with all LEDs with leads on a 2.54mm pitch
• Significantly reduces panel assembly time
• Dimensions 14.5 x 2.6mm
• Moulded in Toray
• UL 94V-0 rating

A two part panel clip to secure 5mm LEDs. Insert the clip from the panel front and insert the LED front the rear and secure with the retaining ring. This will leave the LED protruding 2.5mm beyond the clip ring.

• Panel thickness 2.8mm
• Panel hole 6mm dia

Attractive chrome plated brass recessed LED bezel for 3mm LEDs. The LED is held in position by retaining mount which push fits into the rear of the holder.

Attractive chrome plated brass recessed LED bezel for 5mm LEDs. The LED is held in position by retaining mount which push fits into the rear of the holder.