A 10mm 24V DC snap-in panel mount blue LED indicator with a coloured diffused flat lens. Ideal for applications such as domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets, battery chargers/power supplies.

• Ideal for replacing filament or neon indicators
• Requires no additional hardware
• Faston terminals
• UL496 recognised component

A 10mm 12V DC snap-in panel mount yellow LED indicator with a coloured diffused flat lens. Ideal for applications such as domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets, battery chargers/power supplies.

• Ideal for replacing filament or neon indicators
• Requires no additional hardware
• Faston terminals
• UL496 recognised component

A 10mm 12V DC snap-in panel mount blue LED indicator with a coloured diffused flat lens. Ideal for applications such as domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets, battery chargers/power supplies.

• Ideal for replacing filament or neon indicators
• Requires no additional hardware
• Terminated by 200mm wire leads
• UL496 recognised component
• Manufacturer's part QS103XXB12

A 10mm 12V DC snap-in panel mount green LED indicator with a coloured diffused flat lens. Ideal for applications such as domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets, battery chargers/power supplies.

• Ideal for replacing filament or neon indicators
• Requires no additional hardware
• Terminated by 200mm wire leads
• UL496 recognised component
• Manufacturer's part QS103XXG12

A 10mm 24V DC snap-in panel mount orange LED indicator with a coloured diffused flat lens. Ideal for applications such as domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets, battery chargers/power supplies.

• Ideal for replacing filament or neon indicators
• Requires no additional hardware
• Terminated by 200mm wire leads
• UL496 recognised component
• Manufacturer's part QS103XXO24

A 10mm 12V DC snap-in panel mount red LED indicator with a coloured diffused flat lens. Ideal for applications such as domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets, battery chargers/power supplies.

• Ideal for replacing filament or neon indicators
• Requires no additional hardware
• Terminated by 200mm wire leads
• UL496 recognised component
• Manufacturer's part QS103XXR12

A 10mm 12V DC snap-in panel mount white LED indicator with a coloured diffused flat lens. Ideal for applications such as domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets, battery chargers/power supplies.

• Ideal for replacing filament or neon indicators
• Requires no additional hardware
• Terminated by 200mm wire leads
• UL496 recognised component
• Manufacturer's part QS103XXW12

A 10mm 24V DC snap-in panel mount white LED indicator with a coloured diffused flat lens. Ideal for applications such as domestic and commercial white goods, catering equipment, fire alarm panels, power distribution sockets, battery chargers/power supplies.

• Ideal for replacing filament or neon indicators
• Requires no additional hardware
• Terminated by 200mm wire leads
• UL496 recognised component
• Manufacturer's part QS103XXW24

High quality panel mounted 10mm 12V LED with prominent style green indicator in a brass housing, suitable for a wide range of applications.

• Integral resistor enables direct connection to relevant supply
• Prominent style indicator in a brass housing
• Connections via faston/solder tag terminals
• Satin or black chrome bezels
• CE approved

High quality panel mounted 10mm 12V LED with prominent style red indicator in a brass housing, suitable for a wide range of applications.

• Integral resistor enables direct connection to relevant supply
• Prominent style indicator in a brass housing
• Connections via faston/solder tag terminals
• Satin or black chrome bezels
• CE approved

High quality panel mounted 10mm 24V LED with prominent style red indicator in a brass housing, suitable for a wide range of applications.

• Integral resistor enables direct connection to relevant supply
• Prominent style indicator in a brass housing
• Connections via faston/solder tag terminals
• Satin or black chrome bezels
• CE approved

An indicator, containing a 10mm LED, that features tri-colour operation. Using a common cathode it is possible to select either red, green or a combination of both to produce yellow.

• 24V DC
• Chrome bezel
• M14 Fixing
• Supplied with fixing nut and sealing gasket
• Protection to IP67
• CML-IT 19240354 type

A white 110V BA9 bayonet LED lamp. This high brightness lamp is suitable for a range of applications.

• ø10 x 23mm
• Long life 30,000 hours
• IP55 Rating

A green 110V BA9 bayonet LED lamp. This high brightness lamp is suitable for a range of applications.

• ø10 x 23mm
• Long life 30,000 hours
• IP55 Rating

A red 110V BA9 bayonet LED lamp. This high brightness lamp is suitable for a range of applications.

• ø10 x 23mm
• Long life 30,000 hours
• IP55 Rating

A red 230V BA9 bayonet LED lamp. This high brightness lamp is suitable for a range of applications.

• ø10 x 23mm
• Long life 30,000 hours
• IP55 Rating

An amber 110V BA9 bayonet LED lamp. This high brightness lamp is suitable for a range of applications.

• ø10 x 23mm
• Long life 30,000 hours
• IP55 Rating

A blue 110V BA9 bayonet LED lamp. This high brightness lamp is suitable for a range of applications.

• ø10 x 23mm
• Long life 30,000 hours
• IP55 Rating

A white 12V 9.7mm LED panel indicator that is of the screw-in type. The design of this solid state lamp, with its special combination of reflector and concave lens, produces a device that has a radiation pattern similar to multiple-die LEDs. The LED indicator also features an integrated resistor with a full-wave rectifier so that the LED can work with both AC and DC.

• Base E10
• Viewing angle 160°
• –40°C to +70°C
• Dimensions Ø9.7 x 22mm
• Operational life 50,000 hours

A yellow 12V AC/DC LED signal indicator lamp with a round lens head and a snap-in mounting design. The LED has a high brightness and built-in half-wave rectification means that the LED will work at AC or DC voltages.

• Luminous intensity 10,000mcd
• Viewing angle 15°
• Flat, matte surface aperture
• Very good on/off contrast
• One-way alignment
• Flat pin connector 2.8 x 0.8mm
• Mounting hole Ø10mm +0.2mm

A green 24V AC/DC LED signal indicator lamp with a round lens head and a snap-in mounting design. The LED has a high brightness and built-in half-wave rectification means that the LED will work at AC or DC voltages.

• Luminous intensity 200mcd
• Viewing angle 30°
• Flat, matte surface aperture
• Very good on/off contrast
• One-way alignment
• Flat pin connector 2.8 x 0.8mm
• Mounting hole Ø10mm +0.2mm

A red 230V AC/DC LED signal indicator lamp with a round lens head and a snap-in mounting design. The LED has a high brightness and built-in half-wave rectification means that the LED will work at AC or DC voltages.

• Luminous intensity 10,000mcd
• Viewing angle 15°
• Flat, matte surface aperture
• Very good on/off contrast
• One-way alignment
• Flat pin connector 2.8 x 0.8mm
• Mounting hole Ø10mm +0.2mm

A blue 230V AC/DC LED signal indicator lamp with a round lens head and a snap-in mounting design. The LED has a high brightness and built-in half-wave rectification means that the LED will work at AC or DC voltages.

• Luminous intensity 6000mcd
• Viewing angle 30°
• Flat, matte surface aperture
• Very good on/off contrast
• One-way alignment
• Flat pin connector 2.8 x 0.8mm
• Mounting hole Ø10mm +0.2mm

A white 230V AC/DC LED signal indicator lamp with a round lens head and a snap-in mounting design. The LED has a high brightness and built-in half-wave rectification means that the LED will work at AC or DC voltages.

• Luminous intensity 3200mcd
• Viewing angle 70°
• Flat, matte surface aperture
• Very good on/off contrast
• One-way alignment
• Flat pin connector 2.8 x 0.8mm
• Mounting hole Ø10mm +0.2mm

A red 12V AC/DC LED signal indicator lamp with a square lens head and a snap-in mounting design. The LED has a high brightness and built-in half-wave rectification means that the LED will work at AC or DC voltages.

• Luminous intensity 10,000mcd
• Viewing angle 15°
• Flat, matte surface aperture
• Very good on/off contrast
• One-way alignment
• Flat pin connector 2.8 x 0.8mm
• Mounting hole Ø10mm +0.2mm

A yellow 12V AC/DC LED signal indicator lamp with a arrow-shaped lens head and a snap-in mounting design. The LED has a high brightness and built-in half-wave rectification means that the LED will work at AC or DC voltages.

• Luminous intensity 10,000mcd
• Viewing angle 15°
• Flat, matte surface aperture
• Very good on/off contrast
• One-way alignment
• Flat pin connector 2.8 x 0.8mm
• Mounting hole Ø10mm +0.2mm

A yellow 24V AC/DC LED signal indicator lamp with a arrow-shaped lens head and a snap-in mounting design. The LED has a high brightness and built-in half-wave rectification means that the LED will work at AC or DC voltages.

• Luminous intensity 10,000mcd
• Viewing angle 15°
• Flat, matte surface aperture
• Very good on/off contrast
• One-way alignment
• Flat pin connector 2.8 x 0.8mm
• Mounting hole Ø10mm +0.2mm

A red 230V AC/DC LED signal indicator lamp with a arrow-shaped lens head and a snap-in mounting design. The LED has a high brightness and built-in half-wave rectification means that the LED will work at AC or DC voltages.

• Luminous intensity 10,000mcd
• Viewing angle 15°
• Flat, matte surface aperture
• Very good on/off contrast
• One-way alignment
• Flat pin connector 2.8 x 0.8mm
• Mounting hole Ø10mm +0.2mm