A 12V DC 1.5W solenoid that has an M2 fixing and is connected via 100mm wires. The solenoid has 4mm of lift and the start force and end force values are 0.08N and 3N.

• Open design with enclosed yoke and anchoring cone, draw magnet
• Limit temperature 120°C
• Dimensions L x W x H 15 x 10 x 8mm

A 12V DC 4.2W solenoid that has an M3 fixing and is connected via solder tags. The solenoid has 14mm of lift and the start force and end force values are 0.4N and 18N.

• Open design with enclosed yoke and anchoring cone, draw magnet
• Limit temperature 120°C
• Dimensions L x W x H 15 x 10 x 8mm

A 24V DC 9.5W solenoid that has an M3 fixing and is connected via solder tags. The solenoid has 14mm of lift and the start force and end force values are 4N and 39N.

• Open design with enclosed yoke and anchoring cone, draw magnet
• Limit temperature 120°C
• Dimensions L x W x H 15 x 10 x 8mm

The BDC7 series are a range of DC linear solenoids with a single pull plunger. The solenoids are simple and robust and are suitable for a variety of applications.

• 24V DC
• Pull type
• 20W Power at 100% rating
• Plunger weight 180g

This open-framed linear solenoid is of the push type with a 1.5mm stroke. Voltage is 12V DC and the solenoid has dimensions of 22 x 11 x 10mm. The device is an economical and lightly constructed device that is suitable for a very wide range of applications.

This open-framed linear solenoid is of the pull type with a 1.5mm stroke. Voltage is 12V DC and the solenoid has dimensions of 22 x 11 x 10mm. The device is an economical and lightly constructed device that is suitable for a very wide range of applications.

This open-framed linear solenoid is of the push type with a 15mm stroke. Voltage is 12V DC and the solenoid has dimensions of 40 x 29.5 x 24.2mm. The device is an economical and lightly constructed device that is suitable for a very wide range of applications.

This open-framed linear solenoid is of the push type with a 15mm stroke. Voltage is 24V DC and the solenoid has dimensions of 40 x 29.5 x 24.2mm. The device is an economical and lightly constructed device that is suitable for a very wide range of applications.

This open-framed linear solenoid is of the pull type with a 15mm stroke. Voltage is 12V DC and the solenoid has dimensions of 40 x 29.5 x 24.2mm. The device is an economical and lightly constructed device that is suitable for a very wide range of applications.

This open-framed linear solenoid is of the push type with a 18mm stroke. Voltage is 12V DC and the solenoid has dimensions of 64 x 38 x 30mm. The device is an economical and lightly constructed device that is suitable for a very wide range of applications.

This open-framed linear solenoid is of the pull type with a 18mm stroke. Voltage is 24V DC and the solenoid has dimensions of 64 x 38 x 30mm. The device is an economical and lightly constructed device that is suitable for a very wide range of applications.

This open-framed linear solenoid is of the pull type with a 18mm stroke. Voltage is 24V DC and the solenoid has dimensions of 64 x 38 x 30mm. The device is an economical and lightly constructed device that is suitable for a very wide range of applications.

This 24V DC push-type solenoid has a frame design and a stroke length of 25 to 40mm.

• Extremely stable
• Damping ring reduces noise
• Open design with closed yoke

This 24V DC pull-type solenoid has a frame design and a stroke length of 25 to 40mm.

• Extremely stable
• Damping ring reduces noise
• Open design with closed yoke

This cylindrically-bodied linear solenoid is of the push type with a 18mm stroke. Voltage is 12V DC and the diameter of the body is 25mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Includes return spring
• Fixings M3

This cylindrically-bodied linear solenoid is of the push type with a 18mm stroke. Voltage is 24V DC and the diameter of the body is 25mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Includes return spring
• Fixings M3

This cylindrically-bodied linear solenoid is of the pull type with a 18mm stroke. Voltage is 12V DC and the diameter of the body is 25mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Fixings M3

This cylindrically-bodied linear solenoid is of the pull type with a 18mm stroke. Voltage is 6V DC and the diameter of the body is 25mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Fixings M3

This cylindrically-bodied linear solenoid is of the push type with a 4mm stroke. Voltage is V DC and the diameter of the body is mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Includes return spring
• Fixings M3

This cylindrically-bodied linear solenoid is of the push type with a 4mm stroke. Voltage is 6V DC and the diameter of the body is 13mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Includes return spring
• Fixings M3

This cylindrically-bodied linear solenoid is of the pull type with a 4mm stroke. Voltage is 12V DC and the diameter of the body is 13mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Fixings M3

This cylindrically-bodied linear solenoid is of the pull type with a 4mm stroke. Voltage is 6V DC and the diameter of the body is 13mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Fixings M3

This cylindrically-bodied linear solenoid is of the push type with a 9 to 16mm stroke. Voltage is 12V DC and the diameter of the body is 16mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Includes return spring
• Fixings M3

This cylindrically-bodied linear solenoid is of the pull type with a 9 to 16mm stroke. Voltage is 12V DC and the diameter of the body is 16mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Fixings M3

This cylindrically-bodied linear solenoid is of the pull type with a 9 to 16mm stroke. Voltage is 24V DC and the diameter of the body is 16mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Fixings M3

This cylindrically-bodied linear solenoid is of the push type with a 10mm stroke. Voltage is 12V DC and the diameter of the body is 20mm. The closed design and high efficiency make the solenoid suitable for a wide range of applications, especially in harsh environments.

• Closed design
• Higher efficiency than bar magnets
• Can be used in harsh environments
• Installation via screw caps
• Includes return spring
• Fixings M3