A 1A DIL-packaged bridge rectifier with a V_RRM of 80V that gives excellent performance in an extremely compact package, making it ideal for high package density in circuit boards.

• DIL-4 package
• T_j –55°C to +125°C
• Plastic case to UL 94V-0

2A Radial bridge rectifier in a Ø9mm plastic case. The device has a V_RRM of 80V and is suitable for a wide range of applications.

• Dimensions Ø9 x 5mm
• T_j –50°C to +150°C

A B40S 1A SMD single-phase bridge rectifier with an input voltage of 40V and a repetitive peak reverse voltage of 80V.

• T_j –50°C to +150°C

A bridge rectifier in a plastic SILcase. The component is a 4.8A device that has a V_RRM of 1000V and is suitable for medium power general purpose applications.

• Through-hole mounting
• 32 x 5.6 x 17mm SIL case
• UL 94V-0 Classified

Bridge rectifier housed in a DIL package, ideal for use with printed circuit boards.

• Dimensions 9.2 x 6.4mm
• Pitch 5.1 x 7.6mm
• 1A rated
• Repetitive peak reverse voltage 100V
• Forward voltage 1.1V
• Reliable low cost construction
• Glass passivated junction

Bridge rectifier housed in a DIL package, ideal for use with printed circuit boards.

• Dimensions 9.2 x 6.4mm
• Pitch 5.1 x 7.6mm
• 1A rated
• Repetitive peak reverse voltage 200V
• Forward voltage 1.1V
• Reliable low cost construction
• Glass passivated junction

Bridge rectifier housed in a DIL package, ideal for use with printed circuit boards.

• Dimensions 9.2 x 6.4mm
• Pitch 5.1 x 7.6mm
• 1A rated
• Repetitive peak reverse voltage 600V
• Forward voltage 1.1V
• Reliable low cost construction
• Glass passivated junction

Bridge rectifier housed in a DIL package, ideal for use with printed circuit boards.

• Dimensions 9.2 x 6.4mm
• Pitch 5.1 x 7.6mm
• 1A rated
• Repetitive peak reverse voltage 800V
• Forward voltage 1.1V
• Reliable low cost construction
• Glass passivated junction

SIL bridge rectifier with 200V repetitive peak reverse voltage and 4A average forward current.

• Glass passivated junction
• Polarity symbols marked on body
• Housed in a plastic package
• 150A peak forward current
• 1V max. forward voltage drop
• Operating temperature range –55°C to +150°C
• Dimensions 22.3 x 18.7mm, 5.33mm pitch
• Rated at UL 94V-0

SIL bridge rectifier with 1000V repetitive peak reverse voltage and 4A average forward current.

• Glass passivated junction
• Polarity symbols marked on body
• Housed in a plastic package
• 150A peak forward current
• 1V max. forward voltage drop
• Operating temperature range –55°C to +150°C
• Dimensions 22.3 x 18.7mm, 5.33mm pitch
• Rated at UL 94V-0

Miniature SIL bridge rectifier with polarity symbols marked on body, ideal for printed circuit board.

• Glass passivated junction
• Polarity symbols marked on body
• Housed in a plastic package
• 175A peak forward current
• 1V max. forward voltage drop
• Operating temperature range –55°C to +150°C
• Dimensions 22.3 x 18.7mm, 5.33mm pitch
• Rated at UL 94V-0

SIL bridge rectifier from the GBU8 series, with 50V repetitive peak reverse voltage and 8A average forward current, ideal for use on a printed circuit board.

• Glass passivated junction
• Polarity symbols marked on body
• Housed in a plastic package
• 200A peak forward current
• 1V max. forward voltage drop
• Operating temperature range –55°C to +150°C
• Dimensions 22.3 x 18.7mm, 5.33mm pitch
• Rated at UL 94V-0

SIL bridge rectifier from the GBU8 series, with 400V repetitive peak reverse voltage and 8A average forward current, ideal for use on a printed circuit board.

• Glass passivated junction
• Polarity symbols marked on body
• Housed in a plastic package
• 200A peak forward current
• 1V max. forward voltage drop
• Operating temperature range –55°C to +150°C
• Dimensions 22.3 x 18.7mm, 5.33mm pitch
• Rated at UL 94V-0

SIL bridge rectifier from the GBU8 series, with 600V repetitive peak reverse voltage and 8A average forward current, ideal for use on a printed circuit board.

• Glass passivated junction
• Polarity symbols marked on body
• Housed in a plastic package
• 200A peak forward current
• 1V max. forward voltage drop
• Operating temperature range –55°C to +150°C
• Dimensions 22.3 x 18.7mm, 5.33mm pitch
• Rated at UL 94V-0

Miniature bridge rectifier from the KBPC series, ideal for printed circuit boards.

• Repetitive peak reverse voltage 200V
• Average forward current 3A
• Peak forward surge current 50A
• Forward voltage 1V
• 10uA reverse leakage current
• BR-3 case
• Pitch 10.8 x 10.8mm

Miniature bridge rectifier from the KBPC series, ideal for printed circuit boards.

• Repetitive peak reverse voltage 400V
• Average forward current 3A
• Peak forward surge current 50A
• Forward voltage 1V
• 10uA reverse leakage current
• BR-3 case
• Pitch 10.8 x 10.8mm

Metal clad bridge rectifier from the DC Components KBPC series.

• Metal case for maximum heat dissipation
• Low forward voltage drop
• Single hole fixing
• 28mm square
• 11mm high
• 15A rated
• Repetitive peak reverse voltage 200V
• Peak forward surge current 300A
• Forward voltage 1.1V
• MB-25 case
• Case to UL 94V-0

Metal clad bridge rectifier from the KBPC series with 200V repetitive peak reverse voltage and 25A average forward current.

• Single hole fixing
• 28mm square
• 11mm high
• 25A rated
• 400A peak forward surge current
• 1.1V forward voltage
• 10uA reverse leakage current
• MB-25 case

Metal clad bridge rectifier from the KBPC series with 600V repetitive peak reverse voltage and 25A average forward current.

• Single hole fixing
• 28mm square
• 11mm high
• 25A rated
• 400A peak forward surge current
• 1.1V forward voltage
• 10uA reverse leakage current
• MB-25 case

Metal clad bridge rectifier from the KBPC series with a metal case for maximum heat dissipation.

• Single hole fixing
• 6.3 x 0.8mm fast-on termination
• Dimensions 28.5 x 28.5 x 11.5mm
• 35A rated
• Repetitive peak reverse voltage 200V
• Average forward current 35A
• Peak forward surge current 400A
• 1.1V forward voltage
• 10uA reverse leakage current
• MB-25 case

Metal clad bridge rectifier from the KBPC series with a metal case for maximum heat dissipation.

• Single hole fixing
• 6.3 x 0.8mm fast-on termination
• Dimensions 28.5 x 28.5 x 11.5mm
• 35A rated
• Repetitive peak reverse voltage 600V
• Average forward current 35A
• Peak forward surge current 400A
• 1.1V forward voltage
• 10uA reverse leakage current
• MB-25 case

A 600V single-phase silicon bridge rectifier rated at 50A. The device features a metal case that maximises heat dissipation.

• 500A Surge overload rating
• Low forward voltage drop
• Single hole fixing
• 6.3 x 0.8mm fast-on termination
• Dimensions 30 x 30 x 11.5mm

Miniature 1.5A 50V plastic encapsulated W0 Series bridge rectifier for direct mounting to printed circuit boards.

• Height 5mm
• Diameter 8mm
• Pitch 5.1mm

Miniature 1.5A 200V plastic encapsulated W0 Series bridge rectifier for direct mounting to printed circuit boards.

• Height 5mm
• Diameter 8mm
• Pitch 5.1mm

Miniature 1.5A 400V plastic encapsulated W0 Series bridge rectifier for direct mounting to printed circuit boards.

• Height 5mm
• Diameter 8mm
• Pitch 5.1mm

Miniature 1.5A 600V plastic encapsulated W0 Series bridge rectifier for direct mounting to printed circuit boards.

• Height 5mm
• Diameter 8mm
• Pitch 5.1mm

Miniature 1.5A 800V plastic encapsulated W0 Series bridge rectifier for direct mounting to printed circuit boards.

• Height 5mm
• Diameter 8mm
• Pitch 5.1mm

SMD DIL bridge rectifier from Diotec, made to an industry standard 8.3 x 6.4mm package.

• 250V repetitive peak reverse voltage
• 1A average forward current
• 44A peak forward surge current
• 1.1V forward voltage
• 10uA reverse leakage current
• 4-SO-DIL case

A 10A bridge rectifiers with a V_RRM of 600V. The PCB mounting device has an epoxy case with an aluminium baseplate to maximise thermal management.

• Fast-On terminals
• Dimensions 28.6 x 28.6 x 7.3mm
• T_j –50°C to +150°C

This 1A bridge rectifier from Diotec is housed in a standard DIL package.

• Repetitive peak reverse voltage 600V
• Dimensions 8.3 x 6.4mm
• Pitch 7.5 x 5.1mm
• 1A rated

A 25A silicon bridge rectifier with a V_RRM of 200V. An aluminium baseplate enables more efficient thermal management.

• Epoxy housing with aluminium baseplate
• Fast-On terminals
• Dimensions 28.6 x 28.6 x 7.3mm
• T_j –50°C to +150°C

This 5A bridge rectifier diodes has a 160V_RRM value. The rectifier diode comes in a SIL package suitable for high density PCB mounting.

• SIL Package
• Dimensions 32 x 5.6 x 17mm
• T_j –50°C to +150°C

This 1A bridge rectifier from Diotec is housed in a standard DIL package.

• Repetitive peak reverse voltage 160V
• Dimensions 8.3 x 6.4mm
• Pitch 7.5 x 5.1mm
• 1A rated

Miniature single in-line configuration bridge rectifier from the KBU series.

• 600V repetitive peak reverse voltage
• 4A rated
• 200A peak forward surge current
• 1V forward voltage
• 10uA reverse leakage current
• Dimensions 23 x 19mm
• Pitch 5.1mm

A slim profile SMD bridge rectifier that has a nominal current of 0.8A and a V_RRM value of 600V. This device is suitable for low power general purpose use.

• Surface mounting device suitable for automatic pick and place
• 4.7 x 3.9 x 1.5mm MiniDIL plastic case
• UL 94V-0 Classified

25A Silicon Bridge Rectifier diode from Diotec with an V_RRM of 400V.

• Through-hole mounting
• Wide temperature range
• Dimensions 30 x 18 x 3.6mm
• UL 94V-0 Classification

25A Silicon Bridge Rectifier diode from Diotec with an V_RRM of 600V.

• Through-hole mounting
• Wide temperature range
• Dimensions 30 x 18 x 3.6mm
• UL 94V-0 Classification

A 10A silicon bridge rectifier with a V_RRM of 100V. An aluminium baseplate enables more efficient thermal management.

• Epoxy housing with aluminium baseplate
• Fast-On terminals
• Dimensions 28.6 x 28.6 x 7.3mm
• T_j –50°C to +150°C

A 6A bridge rectifier which is a through-hole mounting device that has an M4 mounting hole. Suiable for applications with a higher current rating.

• Through-hole mounting
• 15.2 x 15.2 x 6.3mm plastic case
• Ø3.9mm mounting hole
• UL 94V-0 Classified

This bridge rectifier is an 8A device in a through-hole mounting configuration with an M4 mounting hole. This high power device is suitable for a wide range of applications.

• Through-hole mounting
• 19 x 19 x 6.8mm plastic case
• Ø3.9mm mounting hole
• UL 94V-0 Classified

An 0.5A bridge rectifier in an SMD package that has a V_RRM of 80V. Suitable for general purpose usage.

• Surface mounting device suitable for automatic pick and place
• 3 x 3 x 1.8mm MicroDIL plastic case
• UL 94V-0 Classified

KBL403G C2. Bridge Rectifier diode, single phase, glass passivated, 200V V_RRM, 4A I_F(AV), 150A I_FSM, 1.1V V_F, 500µA I_R, KBL Case, –55°C to +150°C, 5.61g Weight.

A 35A 1200V high power single phase bridge rectifier diode in a compact, encapsulated case that can be PCB or chassis mounted. The efficient and reliable operation of this device make it ideal for use in general purpose industrial and instrumentation applications.

• Faston connectors
• Center hole fixing
• High thermal conductivity package
• Electrically insulated case
• Excellent power/volume ratio
• UL Approved

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.

A 6A 50V encapsulated bridge rectifier that is suitable for installing on a PCB or being chassis mounted. Designed for general purpose applications in industrial and domestic equipment.

• Compact construction
• High surge current capability
• Wide temperature range

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.

A 6A 800V encapsulated bridge rectifier that is suitable for installing on a PCB or being chassis mounted. Designed for general purpose applications in industrial and domestic equipment.

• Compact construction
• High surge current capability
• Wide temperature range

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.