• Electromagnetic Compatibility coating
• Lid mounted by four M3 machine screws
• Brass inserts in base for repeated removal of the lid
• Excellent properties for machining
• Integral mounting guides to accept 1.6mm PCB's
• PCB Adaptors (included) for horizontal PCB mounting
• Standard unit includes: Base & lid, 4x M3 machine screws, PCB adaptors

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

A complete kit of parts to construct an ELMA EUK10465 type 14 enclosure.

The kit includes all the extrusions, panels and fixings needed to make a complete 3U, 19 inch wide case.

• 3U x 81hp x 292mm
• Can be used as a desktop case or sub-rack for mounting in a 19in. cabinet
• Extruded aluminium frame
• Easily fitted cover plates
• Panels and modules can be mounted from the front or the back
• Accepts PCBs and plug-in units based on standard card sizes conforming to DIN 41494 or IEC 60297
• Dimensions according to IEC 60297
• Suitable for use where the equipment is subject to continuous vibration
• ELMA type EUK10465

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 120 x 59 x 31mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457C1201E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black textured aluminium enclosure
• Size: 120 x 59 x 31mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457C1201EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 120 x 59 x 31mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457C1202E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 120 x 59 x 31mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457C1202EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 80 x 59 x 31mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457C801E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black textured aluminium enclosure
• Size: 80 x 59 x 31mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457C801EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 80 x 59 x 31mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457C802E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 80 x 59 x 31mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457C802EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 120 x 84 x 28.5mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457J1201E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 120 x 84 x 28.5mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457J1201EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 120 x 84 x 28.5mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457J1202E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 120 x 84 x 28.5mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457J1202EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 160 x 84 x 28.5mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457J1601E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 160 x 84 x 28.5mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457J1601EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 160 x 84 x 28.5mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457J1602E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 160 x 84 x 28.5mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457J1602EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 120 x 84 x 44mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457K1201E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 120 x 84 x 44mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457K1201EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 120 x 84 x 44mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457K1202E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 120 x 84 x 44mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457K1202EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 160 x 84 x 44mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457K1601E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 160 x 84 x 44mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457K1601EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 160 x 84 x 44mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457K1602E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 160 x 84 x 44mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457K1602EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 120 x 104 x 32mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457L1201E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 120 x 104 x 32mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457L1201EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 120 x 104 x 32mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457L1202E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 120 x 104 x 32mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457L1202EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 160 x 104 x 32mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457L1601E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 160 x 104 x 32mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457L1601EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 160 x 104 x 32mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457L1602E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 160 x 104 x 32mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457L1602EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 120 x 104 x 55mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457N1201E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 120 x 104 x 55mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457N1201EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 120 x 104 x 55mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457N1202E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 120 x 104 x 55mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457N1202EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 160 x 104 x 55mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457N1601E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 160 x 104 x 55mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457N1601EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54.

Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 160 x 104 x 55mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457N1602E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Black painted aluminium enclosure
• Size: 160 x 104 x 55mm
• Supplied with panel mounting flanges for securing to wall or shelf
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457N1602EBK

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 160 x 165 x 55mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457T1601E

Extruded aluminium enclosure from the Hammond 1457 series, ideal for housing PCBs and for equipment interfacing. The conductive seals included with the enclosure provide protection against RFI/EMI and protect against ingress of dust and water to IP54. Recessed areas on top and bottom of the enclosure allow for the fitting of labels, membrane keypads etc.

• Natural anodised aluminium enclosure
• Size: 220 x 165 x 55mm
• Internal horizontal slots extruded into the enclosure body for mounting PCBs
• Conductive gasket provides protection against RFI/EMI
• Die-cast aluminium end caps
• Supplied complete with fixing screws, O rings, and self-adhesive feet
• End panels are black on all models
• Manufacturer's part 1457T2201E