A 121°C thermal fuse that uses an organic thermosensitive pellet inside a metal case. Features a large rated current of up to 15A 250V AC. The device contains a sliding contact, springs, and a thermal pellet inside a metal case. When the spring is compressed, firm contact between one lead and the sliding contact occurs. At normal temperatures, current flows from the lead to the sliding contact and then through the metal case to the other lead. When the ambient temperature rises to the SEFUSE operating temperature, the heat transferred through the metal case melts the thermal pellet. When the thermal pellet melts, two springs expand, moving the sliding contact away from the lead. The electrical circuit is opened by breaking contact between the sliding contact and the lead.

• Long lead axial package
• Rated to 15A 250V AC
• Safety standards UL, VDE, CCC, PSE

A 99°C thermal fuse that uses an organic thermosensitive pellet inside a metal case. Features a large rated current of up to 15A 250V AC. The device contains a sliding contact, springs, and a thermal pellet inside a metal case. When the spring is compressed, firm contact between one lead and the sliding contact occurs. At normal temperatures, current flows from the lead to the sliding contact and then through the metal case to the other lead. When the ambient temperature rises to the SEFUSE operating temperature, the heat transferred through the metal case melts the thermal pellet. When the thermal pellet melts, two springs expand, moving the sliding contact away from the lead. The electrical circuit is opened by breaking contact between the sliding contact and the lead.

• Long lead axial package
• Rated to 15A 250V AC
• Safety standards UL, VDE, CCC, PSE

This X0 thermal fuse from SETFuse is a 76°C thermal cutoff device that carries out fast, one-time over temperature correction duties in circuits. Suitable in motor, battery, transformer, power supplies, lamps and lanterns, home electrical appliances, etc. Approvals:

UL/cUL:	E214712
VDE:	40017055
TUV:	R50161779
PSE:	09020139/40/41/42/43/44
CCC:	2009010205346083
KTL:	SU05023-6001A/6003B

• Plastic case
• Body dimensions: 5.8 x 5.8 x 2.3mm
• Length including leads: 70mm
• Pitch: 3.7mm
• Alloy type Thermal-link

This X1 thermal fuse from SETFuse is a 102°C thermal cutoff device that carries out fast, one-time over temperature correction duties in circuits. Suitable in motor, battery, transformer, power supplies, lamps and lanterns, home electrical appliances, etc. Approvals:

UL/cUL:	E214712
VDE:	40017055
TUV:	R50161779
PSE:	09020139/40/41/42/43/44
CCC:	2009010205346083
KTL:	SU05023-6001A/6003B

• Plastic case
• Body dimensions: 5.8 x 5.8 x 2.3mm
• Length including leads: 70mm
• Pitch: 3.7mm
• Alloy type Thermal-link

This X18 thermal fuse from SETFuse is a 86°C thermal cutoff device that carries out fast, one-time over temperature correction duties in circuits. Suitable in motor, battery, transformer, power supplies, lamps and lanterns, home electrical appliances, etc. Approvals:

UL/cUL:	E214712
VDE:	40017055
TUV:	R50161779
PSE:	09020139/40/41/42/43/44
CCC:	2009010205346083
KTL:	SU05023-6001A/6003B

• Plastic case
• Alloy type Thermal-link

This X2 thermal fuse from SETFuse is a 115°C thermal cutoff device that carries out fast, one-time over temperature correction duties in circuits.Suitable in motor, battery, transformer, power supplies, lamps and lanterns, home electrical appliances, etc.Approvals:

UL/cUL:	E214712
VDE:	40017055
TUV:	R50161779
PSE:	09020139/40/41/42/43/44
CCC:	2009010205346083
KTL:	SU05023-6001A/6003B

• Plastic case
• Body dimensions: 5.8 x 5.8 x 2.3mm
• Length including leads: 70mm
• Pitch: 3.7mm
• Alloy type Thermal-link

This X3 thermal fuse from SETFuse is a 125°C thermal cutoff device that carries out fast, one-time over temperature correction duties in circuits. Suitable in motor, battery, transformer, power supplies, lamps and lanterns, home electrical appliances, etc. Approvals:

UL/cUL:	E214712
VDE:	40017055
TUV:	R50161779
PSE:	09020139/40/41/42/43/44
CCC:	2009010205346083
KTL:	SU05023-6001A/6003B

• Plastic case
• Body dimensions: 5.8 x 5.8 x 2.3mm
• Length including leads: 70mm
• Pitch: 3.7mm
• Alloy type Thermal-link

This X6 thermal fuse from SETFuse is a 145°C thermal cutoff device that carries out fast, one-time over temperature correction duties in circuits. Suitable in motor, battery, transformer, power supplies, lamps and lanterns, home electrical appliances, etc. Approvals:

UL/cUL:	E214712
VDE:	40017055
TUV:	R50161779
PSE:	09020139/40/41/42/43/44
CCC:	2009010205346083
KTL:	SU05023-6001A/6003B

• Plastic case
• Body dimensions: 5.8 x 5.8 x 2.3mm
• Length including leads: 70mm
• Pitch: 3.7mm
• Alloy type Thermal-link

This X9 thermal fuse from SETFuse is a 136°C thermal cutoff device that carries out fast, one-time over temperature correction duties in circuits. Suitable in motor, battery, transformer, power supplies, lamps and lanterns, home electrical appliances, etc. Approvals:

UL/cUL:	E214712
VDE:	40017055
TUV:	R50161779
PSE:	09020139/40/41/42/43/44
CCC:	2009010205346083
KTL:	SU05023-6001A/6003B

• Plastic case
• Body dimensions: 5.8 x 5.8 x 2.3mm
• Length including leads: 70mm
• Pitch: 3.7mm
• Alloy type Thermal-link

An ESKA thermal fuse that blows when the specified temperature is exceeded (no reset). It is used for protection against overheating. The fuse is wound directly into the windings of transformers, motors and coils.

• Connections: 50 x 0.53mm
• Dimensions: 4(L) x 5.2(W) x 2.2(H)mm
• Insulation voltage: 1500V
• Length: 4mm
• Limit temperature: 200°°C
• Max. continuous operating temperature: 70°C
• Nominal activation temperature: 103°C
• Nominal current: 1A
• Nominal voltage: 250V
• Type: N 2
• Approvals: VDE, UL and CSA

An ESKA thermal fuse, perfect for surface mounting or panel mounting on appliances. The fuse interrupts current supply immediately if the permitted operating temperature of the appliance is exceeded.

Applications include ovens, immersion heaters, grills, warming plates, coffee makers, hair dryers, etc. To restore the circuit, the whole thermal cut off unit must be replaced. Tested to VDE 0631 standard.

• Nominal activation temperature: 104°C
• Contact type: normally closed
• Dimensions: 4mm (dia.) x 64.5mm (L)
• Body length: 11.6mm
• Axial package
• Nominal current: 10A
• Nominal voltage: 230V AC
• ESKA type: 770.104

An ESKA thermal fuse, perfect for surface mounting or panel mounting on appliances. The fuse interrupts current supply immediately if the permitted operating temperature of the appliance is exceeded.

Applications include ovens, immersion heaters, grills, warming plates, coffee makers, hair dryers, etc. To restore the circuit, the whole thermal cut off unit must be replaced. Tested to VDE 0631 standard.

• Nominal activation temperature: 110°C
• Contact type: normally closed
• Dimensions: 4mm (dia.) x 64.5mm (L)
• Body length: 11.6mm
• Axial package
• Nominal current: 10A
• Nominal voltage: 230V AC
• ESKA type: 770.110

An ESKA thermal fuse, perfect for surface mounting or panel mounting on appliances. The fuse interrupts current supply immediately if the permitted operating temperature of the appliance is exceeded.

Applications include ovens, immersion heaters, grills, warming plates, coffee makers, hair dryers, etc. To restore the circuit, the whole thermal cut off unit must be replaced. Tested to VDE 0631 standard.

• Nominal activation temperature: 167°C
• Contact type: normally closed
• Dimensions: 4mm (dia.) x 64.5mm (L)
• Body length: 11.6mm
• Axial package
• Nominal current: 10A
• Nominal voltage: 230V AC
• ESKA type: 770.167

An ESKA thermal fuse, perfect for surface mounting or panel mounting on appliances. The fuse interrupts current supply immediately if the permitted operating temperature of the appliance is exceeded.

Applications include ovens, immersion heaters, grills, warming plates, coffee makers, hair dryers, etc. To restore the circuit, the whole thermal cut off unit must be replaced. Tested to VDE 0631 standard.

• Nominal activation temperature: 192°C
• Contact type: normally closed
• Dimensions: 4mm (dia.) x 64.5mm (L)
• Body length: 11.6mm
• Axial package
• Nominal current: 10A
• Nominal voltage: 230V AC
• ESKA type: 770.192

An ESKA thermal fuse, perfect for surface mounting or panel mounting on appliances. The fuse interrupts current supply immediately if the permitted operating temperature of the appliance is exceeded.

Applications include ovens, immersion heaters, grills, warming plates, coffee makers, hair dryers, etc. To restore the circuit, the whole thermal cut off unit must be replaced. Tested to VDE 0631 standard.

• Nominal activation temperature: 216°C
• Contact type: normally closed
• Dimensions: 4mm (dia.) x 64.5mm (L)
• Body length: 11.6mm
• Axial package
• Nominal current: 10A
• Nominal voltage: 230V AC
• ESKA type: 770.216

An ESKA thermal fuse, perfect for surface mounting or panel mounting on appliances. The fuse interrupts current supply immediately if the permitted operating temperature of the appliance is exceeded.

Applications include ovens, immersion heaters, grills, warming plates, coffee makers, hair dryers, etc. To restore the circuit, the whole thermal cut off unit must be replaced. Tested to VDE 0631 standard.

• Nominal activation temperature: 72°C
• Contact type: normally closed
• Dimensions: 4mm (dia.) x 64.5mm (L)
• Body length: 11.6mm
• Axial package
• Nominal current: 10A
• Nominal voltage: 230V AC
• ESKA type: 770.072