This A-USB A/SMT USB 2.0 Socket from Assmann WSW is a low profile USB A socket designed for printed circuit boards.

Manufactured to a high standard and fitted with a brass shell (t=0.3) and nickel plated finish, this right-angled, SMD version offers 1000MΩ min. insulation resistance, plus a 500V AC withstanding voltage (for one minute).

• 14.3 x 14.4mm (W x D)
• Nylon PA9T insulator
• Phosphorbronze (t=0.25mm) contacts
• 1.5A at 250V AC minimum rated voltage and current
• Manufacturer's part A-USB A/SMT

This A-USB B/SMT USB 2.0 Socket from Assmann WSW is a USB B socket designed for printed circuit boards.

Manufactured to a high standard and fitted with a brass shell (t=0.3) and nickel plated finish, this right-angled, SMD version offers 1000MΩ min. insulation resistance, plus a 500V AC withstanding voltage (for one minute).

• 4 pins
• Female
• 12.0 x 16.0mm (W x D)
• Nylon PA9T insulator
• Phosphorbronze (t=0.25mm) contacts
• 1.5A at 250V AC minimum rated voltage and current
• Manufacturer's part A-USB B/SMT

This A-USBSA USB 2.0 Socket from Assmann WSW is a low profile USB A female socket designed for printed circuit boards. Manufactured to a high standard and fitted with copper alloy contacts, this right-angled socket offers 1000MΩ min. insulation resistance, plus a 1000V AC withstanding voltage (for one minute).

For A type USB 2.0
• 11.5 x 15.9 x 14mm (H x W x D)
• PBT, UL94V-0 insulator
• 1A current rating
• Manufacturer's part A-USBSA

This A-USBSB USB 2.0 Socket from Assmann WSW is a USB B female socket designed for printed circuit boards. Manufactured to a high standard and fitted with copper alloy contacts, this right-angled socket offers 1000MΩ min. insulation resistance, plus a 1000V AC withstanding voltage (for one minute).

• For B type USB 2.0
• 14.1 x 15.5mm (H x D)
• PBT, UL94V-0 insulator
• 1A current rating
• Manufacturer's part A-USBSB

BKL Electronics 10120276 This adaptor has a USB plug (type A) and a mini-USB type B socket.

• Colour: Black
• Connector standard: USB 2.0
• Content: 1 pc
• Manufacturer part No.: 10120276

The Cliff CP299802 is a black sealing gasket with cover for use with all XLR feedthrough connectors.

One connector supplied only.

• Silicon XLR Connector Dustcap

Dual USB 2.0 sockets from Cliff, mounted in a single space-saving universal XLR receptacle and chosen to allow industry standard panel cutouts and maximum panel mounting density. The two USB2 sockets provide isolated and independent output connection to two rows of 5 x 2.54mm (0.1in) pitch output pins. These are configured to facilitate either direct soldering to PCBs or connection by a header cable.

• Colour: black
• Panel mount
• Two 5-way headers
• Plug standard: USB 2.0
• Mounting hole size: 22mm
• Manufacturer's part CP30090

A USB 2.0 gender change socket from Cliff designed to accommodate the integration of USB2 data feeds into professional equipment for broadcast, lighting and audio applications. Construction is of rugged zinc/nickel metal XLR housings, fitting the universally popular 23.6mm diameter XLR panel cutouts.

• USB B socket - front; USB A socket - back
• For panel mounting
• Countersunk hole
• Manufacturer's part CP30111

The Cliff CP30201 is part of the FT series of Feedthrough connectors. It is designed to accommodate professional equipment which requires a USB type C connection.

One connector supplied only.

• No soldering, no punch terminations, just use your standard cable to connect
• Diecast metal construction

The Cliff CP30201X is part of the FT series of Feedthrough connectors. It is designed to accommodate professional equipment which requires a USB type C connection.

One connector supplied only.

• No soldering, no punch terminations, just use your standard cable
• Diecast metal construction

The Cliff CP30203NM3 USB 2.0 B to USB 2.0 B feed through data connector with metal frame fits into cut-outs for the industry-standard XLR connector format and features threaded M3 mounting holes, facilitating simple panel assembly, without the need for securing nuts and washers.

One connector supplied only.

• Double-sided, with a connector on back and front -- no wire tails at back
• M3 threaded mounting holes for quick and easy rear panel mounting
• Facilitates simple panel assembly without need for securing nuts and washers
• Fits into cut-outs for industry-standard XLR connector format
• Metal Frame

A USB feed through connector mounted in a plastic XLR format body shell - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• Outside connector USB 3.0A
• Inside connector USB 3.0A
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30205N

The Cliff The CP30205NM3 USB 3.0 A to USB 3.0 A feed through data connector with metal frame fits into cut-outs for the industry-standard XLR connector format and features threaded M3 mounting holes, facilitating simple panel assembly, without the need for securing nuts and washers.

One connector supplied only.

• Double-sided, with a connector on back and front -- no wire tails at back
• M3 threaded mounting holes for quick and easy rear panel mounting
• Facilitates simple panel assembly without need for securing nuts and washers
• Fits into cut-outs for industry-standard XLR connector format
• Metal Frame

The Cliff CP30205NM3B USB 3.0 A to USB 3.0 A feed through data connector with black metal frame fits into cut-outs for the industry-standard XLR connector format and features threaded M3 mounting holes, facilitating simple panel assembly, without the need for securing nuts and washers.

One connector supplied only.

• Double-sided, with a connector on back and front -- no wire tails at back
• M3 threaded mounting holes for quick and easy rear panel mounting
• Facilitates simple panel assembly without need for securing nuts and washers
• Fits into cut-outs for industry-standard XLR connector format
• Black Metal Frame

A USB feed through connector mounted in a plastic XLR format body shell - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• Outside connector USB 3.0A
• Inside connector USB 3.0A
• Plain mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30205NX

A USB 3.0 B to USB 3.0 A feed through connector mounted in a metal XLR format body shell with countersunk mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• USB 3.0 B to USB 3.0 A feed through connector in a standard metal XLR shell
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30206NM

A USB feed through connector mounted in a plastic XLR format body shell - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• Outside connector USB 3.0B
• Inside connector USB 3.0A
• Plain mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30206NX

A USB feed through connector mounted in a plastic XLR format body shell - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• Outside connector USB 2.0B
• Inside connector USB 2.0A
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30207N

A USB feed through connector mounted in a plastic XLR format body shell - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• Outside connector USB 2.0B
• Inside connector USB 2.0A
• Plain mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30207NX

A USB feed through connector mounted in a plastic XLR format body shell - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• Outside connector USB 2.0A
• Inside connector USB 2.0A
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30208N

A USB 2.0 A to USB 2.0 A feed through connector mounted in a metal XLR format body shell with countersunk mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• USB 2.0 A to USB 2.0 A feed through connector in a standard metal XLR shell
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30208NM

The Cliff CP30208NM3 USB 2.0 A to USB 2.0. A feed through data connector with metal frame fits into cut-outs for the industry-standard XLR connector format and features threaded M3 mounting holes, facilitating simple panel assembly, without the need for securing nuts and washers.

One connector supplied only.

• Double-sided, with a connector on back and front -- no wire tails at back
• M3 threaded mounting holes for quick and easy rear panel mounting
• Facilitates simple panel assembly without need for securing nuts and washers
• Fits into cut-outs for industry-standard XLR connector format
• Metal Frame

The Cliff CP30208NM3B USB 2.0 A to USB 2.0 A feed through data connector with black metal frame fits into cut-outs for the industry-standard XLR connector format and features threaded M3 mounting holes, facilitating simple panel assembly, without the need for securing nuts and washers.

One connector supplied only.

• Double-sided, with a connector on back and front -- no wire tails at back
• M3 threaded mounting holes for quick and easy rear panel mounting
• Facilitates simple panel assembly without need for securing nuts and washers
• Fits into cut-outs for industry-standard XLR connector format
• Black Metal Frame

The Cliff CP30208NW is a USB 2.0 socket feedthrough connector with countersunk holes that will fit a standard XLR cutout with a Ø24mm hole.

One connector supplied only.

• Fits standard XLR Ø24mm cutout
• No soldering or punch termination
• Low rear profile
• Countersunk (CSK) holes
• Dimensions (HxWxD): 31 x 26 x 30mm

A USB feed through connector mounted in a plastic XLR format body shell - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• Outside connector USB 2.0A
• Inside connector USB 2.0A
• Plain mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30208NX

The Cliff CP30208NW is a USB 2.0 socket feedthrough connector with countersunk holes.

One connector supplied only.

• Fits a standard XLR Ø24mm cutout
• No soldering or punch termination
• Low rear profile
• Countersunk (CSK) fixing holes
• Dimensions (H x W x D): 31 x 26 x 30mm

A USB feed through connector mounted in a plastic XLR format body shell - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• Outside connector USB 2.0A
• Inside connector USB 2.0B
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30209N

A USB feed through connector mounted in a plastic XLR format body shell - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• Outside connector USB 2.0A
• Inside connector USB 2.0B
• Plain mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30209NX

The Cliff CP30292 USB Type A dust cover is designed to fit feedthrough connectors. They simply push in to the front of the USB port to reduce ingress of dust and dirt.

• For use with USB type A connectors
• Compatible with the Cliff CP30290 lanyard set

The Cliff CP30293 is a USB Type B dust cover designed to fit feedthrough connectors. They simply push in to the front of the USB port to reduce ingress of dust and dirt.

• For use with USB Type B ports
• Compatible with the Cliff CP30290 lanyard set

The Cliff CP30295 is a black USB type C dust cover designed to fit feedthrough connectors. They simply push in to the front of a USB-C port to reduce the ingress of dust and dirt.

One cover supplied only.

• For use with USB type C ports.
• Compatible with the Cliff CP30290 lanyard set

The Cliff CP30296 is a black USB 3.0 type B dust cover designed to fit feedthrough connectors. They simply push in to the front of the USB type B port to reduce the ingress of dust and dirt.

One cover supplied only.

• For use with USB 3.0 type B,
• Compatible with the Cliff CP30290 lanyard set

The Cliff CP30605N is a USB 3.0 Type A socket to USB 3.0 Type A socket. Slim profile feedthrough connector constructed from Polyamide UL94.

One socket supplied only.

• Fits standard rectangular cutout
• No soldering or punch termination
• Low rear profile
• Countersunk holes
• Dimensions (H x W x D): 35.5 x 19 x 41.7mm

The Cliff CP30606N is a USB 3.0 Type B socket to USB 3.0 Type A socket. Slim profile feedthrough connector constructed from Polyamide UL94.

One socket supplied only.

• Fits standard rectangular cutout
• No soldering or punch termination
• Low rear profile
• Countersunk holes
• Dimensions (H x W x D): 35.5 x 19 x 41.7mm

The Cliff CP30608N is a USB 2.0 Type A socket to USB 2.0 Type A socket. Slim profile feedthrough connector constructed from Polyamide UL94.

One socket supplied only.

• Fits standard rectangular cutout
• No soldering or punch termination
• Low rear profile
• Countersunk holes
• Dimensions (H x W x D): 35.5 x 19 x 42mm

The Cliff CP30609N is a USB 2.0 Type A socket to USB 2.0 Type B socket. Slim profile feedthrough connector constructed from Polyamide UL94.

One socket supplied only.

• Fits standard rectangular cutout
• No soldering or punch termination
• Low rear profile
• Countersunk holes
• Dimensions (H x W x D): 35.5 x 19 x 42mm

A dual stacked USB 2.0 connector from Cliff with kinked terminals for snap-in placement to a PC board. Applications include personal computers, audio and data communications, medical equipment and test equipment instrumentation.

• Snap-in terminals facilitate wave soldering
• Shielded for reduced EMI/RFI emissions
• Dual stacked version increases PC board density
• Gold plated contacts to ensure low contact resistance
• Raised design providing easy insertion and withdrawal
• Temperature rating: 32°F to 104°F (0°C to 40°C)
• Body: molded thermoplastic, UL 94V-0
• Contact terminal: copper alloy, gold plating in mating area, tin plating on solder tails, all over nickel plating
• Manufacturer's part FCK002A

Meets all universal Serial Bus standards.

This Black USB 2.0 Socket IP67 with Protection Cap from Conec is a plastic, female adaptor for front and rear panel mounting to a wall thickness up to 3.2mm. Manufactured with inline coupling, bayonet locking, IP67 protection (in mated condition) and copper alloy USB contacts featuring a gold finish.

• Plastic socket and protection cap
• Bayonet locking per IEC 61076-3-106
• Copper alloy USB contacts - gold finish
• 30 mOhm max. contact resistance
• 1000 mOhm min. @ 100V DC insulation resistance
• 1.5A max. current rating at 25°C
• 30V (RMS) max. working voltage
• -40°C to +85°C operating temperature
• Manufacturer's part 17-200161

This EDAC USB 3.0 Type A Boardmount Through-hole connector provides a significant leap forward in data transfer speeds supporting rates up to 5Gbps and is fully compatible with USB 2.0 connectors.

It can be used for applications ranging from computers, printers and digital cameras to medical equipment and automotive products.

• Single piece ensures easy assembly
• Supports hot plugging
• Replaces other port connectors
• Dual-simplex four-wire differential signalling
• Simultaneous bi-directional data flow
• Multi-level power management supporting idle, sleep and suspended mode
• Type A supplied singly

An angled chassis/PCB mounting USB 2.0 plug.

• USB Type A

The Neutrik Reversible USB Changer USB A – USB B is a reversible USB gender changer type USB A and USB B required to integrate computer-based equipment into sound and video systems.

• Ideal for integration of digital equipments into audio systems
• Designed to fit standard Neutrik D-Series cutouts
• Nickel D-housing
• Universally accepted standard D-shape housing

The Neutrik Reversible USB Changer Black USB A – USB B is a reversible USB gender changer type USB A and USB B required to integrate computer-based equipment into sound and video systems.

• Ideal for integration of digital equipments into audio systems
• Designed to fit standard Neutrik D-Series cutouts
• Black D-housing
• Universally accepted standard D-shape housing

A dual, type A USB right-angle PCB connector for use in computers and peripheral equipment. The USB interface allows devices to be connected and disconnected without powering down the system.

• Hot pluggable
• Voltage rating 30V DC
• Current rating 1.5A
• Transfer rate 12Mbps

A reliable USB socket as used for digital products such as cameras, mobile-phones etc.

• Voltage rating: 30V DC
• Contact current rating: 0.5A max. per pin
• Contact resistance: 30mΩ max
• Dielectric withstanding voltage: 100V AC (rms) for 1 minute
• Insulation resistance: 100MΩ min.
• Operating temperature: –20°C to +80°C
• Housing materials: High temperature with 30% glass fibre (UL 94 V–0)
• Contact materials: Copper alloy
• Contact plating: Gold
• Shell materials: Copper alloy

A reliable USB socket as used for digital products such as cameras, mobile-phones etc.

• Housing materials: High temperature with 30% glass fibre (UL 94 V–0)
• Contact materials: Copper alloy
• Contact plating: Gold
• Shell materials: Copper alloy
• Voltage rating: 30V DC
• Contact current rating: 0.5A max. per pin
• Contact resistance: 30mΩ max.
• Dielectric withstanding voltage: 100V AC (rms) for 1 minute
• Insulation resistance: 100MΩ min.
• Operating temperature: –45°C to +110°C

These USB terminals are designed for surface mounting on to a PCB board.

• Housing: PBT,UL 94 V-0
• Shell: Steel
• Contact: Copper alloy

These USB terminals are designed for through-hole mounting on to a PCB board.

• Housing: PBT,UL 94 V-0
• Shell: Steel
• Contact: Copper alloy

This self assemble USB kit will enable you to customise and construct your own USB leads to the length required.

• Housing materials: PBT+30% G.F(UL 94 V-0)
• Contact materials: copper alloy
• Shell materials: steel

A 4-pin, reliable USB plug with solder connections. Commonly used for devices such as digital cameras, mobile-phones etc.

• 4x Solder pin version
• Voltage rating: 30V
• Contact current rating: 0.5A max. per pin
• Contact resistance: 50mΩ max.
• Dielectric withstanding voltage: 100V AC (rms) for 1 minute
• Insulation resistance: 1000MΩ min.
• Operating temperature: –55°C to +105°C
• Housing materials: Nylon–6T with 30% glass fibre (UL 94 V–0)
• Contact materials: Phosphor bronze
• Contact plating: Gold
• Shell materials: Steel

Single type A USB right angle PCB connector for use in computer and peripheral equipment. USB allows devices to be connected and disconnected without powering down the system.

• Hot pluggable
• Voltage rating 30V DC
• Current rating 1.5A
• Transfer rate 12Mbps