High power rising clamp terminal block with 3 poles from the CamBlock Plus range by CamdenBoss. These green blocks are made from flame retardant polyamide.

• 2 and 3-pole versions use double interlocking mechanism for extra strength
• Moulded in UL94-V0 flame-retardant PA66
• Guided pin alignment
• Captive screws
• Wire capacity 4mm² (26 to 10AWG)
• Current rating 30A UL, 32A VDE
• Pitch 9.5mm
• Length 28.56mm
• Width 12.6mm
• Height 21mm
• Manufacturer's part CTBP04VZ/3

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

High power rising clamp terminal block with 5 poles from the CamBlock Plus range by CamdenBoss. These green blocks are made from flame retardant polyamide.

• Moulded in UL94-V0 flame-retardant PA66
• Guided pin alignment
• Captive screws
• Wire capacity 4mm² (26 to 10AWG)
• Current rating 30A UL, 32A VDE
• Pitch 9.5mm
• Length 47.6mm
• Width 12.6mm
• Height 21mm
• Manufacturer's part CTBP04VZ/5

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

High power rising clamp terminal block with 6 poles from the CamBlock Plus range by CamdenBoss. These green blocks are made from flame retardant polyamide.

• Moulded in UL94-V0 flame-retardant PA66
• Guided pin alignment
• Captive screws
• Wire capacity 4mm² (26 to 10AWG)
• Current rating 30A UL, 32A VDE
• Pitch 9.5mm
• Length 57.12mm
• Width 12.6mm
• Height 21mm
• Manufacturer's part CTBP04VZ/6

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

Professional 3-way rising clamp terminal block from CamdenBoss with a 9.52mm pitch, suitable for PCB mounting.

• Double interlocking mechanism for increased strength
• Moulded in green UL94-V0 flame retardant PA68
• 4mm² cable entry (12AWG)
• VDE, IMQ and UL approved
• Guided pin alignment
• Captive screws
• Voltage rating 750V
• Current rating 32A

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

Professional 6-way rising clamp terminal block from CamdenBoss with a 9.52mm pitch, suitable for PCB mounting.

• Double interlocking mechanism for increased strength
• Moulded in green UL94-V0 flame retardant PA68
• 4mm² cable entry (12AWG)
• VDE, IMQ and UL approved
• Guided pin alignment
• Captive screws
• Voltage rating 750V
• Current rating 32A

Rapid is an official distributor of CamdenBoss products. The products listed here are those that Rapid hold in stock – but we have access to many more, including the company's complete range of terminal blocks. Click here to make an enquiry about ordering CamdenBoss terminal blocks, connectors and enclosures.

PCB mounting terminal blocks for connecting wires directly to a circuit board.

Moulded-in latches allow the blocks to be joined together end-to-end without affecting the overall pitch.

• Number of ways: 2
• Nominal current: 32A
• Nominal voltage: 1000V
• Pitch: 9.52mm
• Connection method: screw connection with tension sleeve
• Mounting: wave soldering
• Colour: green
• Can be combined to create desired number of positions
• CSA, SEV & UL approvals

PCB mounting terminal blocks for connecting wires directly to a circuit board.

Moulded-in latches allow the blocks to be joined together end-to-end without affecting the overall pitch.

• Number of ways: 3
• Nominal current: 32A
• Nominal voltage: 1000V
• Pitch: 9.52mm
• Connection method: screw connection with tension sleeve
• Mounting: wave soldering
• Colour: green
• Can be combined to create desired number of positions
• CSA, SEV & UL approvals