A programmable panel mounting digital potentiometer with either a 0 to 10V or a 0 to 20mA output. The unit has a 4-digit display with an adjustable decimal point and control is via a front panel keypad. The high accuracy and high performance feature set make this potentiometer suitable for a wide range of industrial applications.

• Input voltage 230V AC
• Microcontroller controlled
• Adjustable minimum or maximum values
• Selectable 'soft on' and 'soft off'
• Three level parameter access protection
• Can be flush mounted
• Screw terminal connection

The Enda EDP2041 is a Programmable Digital Potentiometer based on a microcontroller with 0 to 10V analogue output. The values are viewed on a 4 digit display. 'Soft On' and 'Soft Off' properties can be selected via the front panel keypad.

• 35 x 77mm panel size
• 4 digits display
• Easy to use by front panel keypad
• Preset value can be adjusted from external buttons
• Display scale can be adjusted between -1999 and 9999
• (Full scale cannot be higher than a 9999)
• Decimal point can be adjusted between 1 and 3 digits
• ‘Soft On' and ‘Soft Off' properties can be selected
• Parameter access protection on 3 levels
• Manufacturer's part: Enda EDP2041

This bezel, when used to secure a compatible panel meter, gives a IP67/NEMA 4X rating from the front. The provided screw fixings enable quick and easy assembly. The bezel is suitable for applications where the prevention of ingress of moisture or particles is desired.

• Robust and attractive construction gives professional finish
• Glass window
• Compatible with panel meters 87-6343 and 87-6344
• Length 65.2 x width 35.2mm

The Lascar BEZ 900-IP is a Panel Mounted IP67 / NEMA 4X Rated Bezel for 900 Series instruments. When used in conjunction with a panel mounted 900 series instrument (purchased separately), this bezel offers the assembly an IP67 /NEMA4X rating from the front. This bezel uses the same panel cut-out as the bezel supplied with a 900 Series module, thus ensuring full compatibility with existing panels.

The screw fixings allow for a quick and easy assembly of the module and bezel in the panel. A robust and attractive alloy construction gives the product a professional finish. BEZ900-IP is ideally suited for applications where the ingress of moisture or particles poses a problem.

• IP67 / NEMA 4X Rated
• Screw Fixing
• Glass Window
• Robust Construction
• Attractive Appearance
• Easy Assembly
• Manufacturer's part: Lascar BEZ 900-IP

The DDM4 is a low power 4-digit data display module with CMOS and TTL compatible inputs. The module requires only three control lines and can display 0 to 9 and A to F, as well as any other combination of segments.

• Digit height 0.5in
• Modules can be cascaded
• Backlighting via 5V LED
• Dimensions 60 x 30 x 12.2mm

A compact panel mounting voltmeter with a 3.5 digit LCD display, 0.5in digit height and a low-profile bezel for mounting. The meter can plug directly into a 12-way SIL socket or can be panel mounted using the snap-in bezel and window supplied. Suitable for applications such as precision instrumentation systems, power supply monitoring, hand held instruments, panel-mount indication, low power voltage measurement, etc.

• Logic selectable decimal points
• Digital hold
• Auto-zero
• Auto-polarity
• FSR May be altered using resistors
• Low battery indication

This compact panel meter uses advanced components and construction techniques to give high performance at low cost. The meter can plug directly into a 12-way SIL socket or can be panel mounted using the snap-in bezel and window supplied.

• Digit height 0.5in
• Logic selectable decimal points
• Digital hold
• Auto-zero
• Auto-polarity
• FSR May be altered using resistors
• Low battery indication

This compact panel meter uses advanced components and construction techniques to give high performance at low cost. The meter can plug directly into a 12-way SIL socket or can be panel mounted using the snap-in bezel and window supplied.

• LED backlight
• Digit height 0.5in
• Logic selectable decimal points
• Digital hold
• Auto-zero
• Auto-polarity
• FSR May be altered using resistors
• Low battery indication

A compact panel meter with a 4.5 digit LCD display. Features low current operation with high accuracy and high stability. Mounting is easy with the supplied snap-in bezel.

• Digit height 0.5in
• Programmable decimal points
• Continuity flags
• Autoranging outputs
• Digital hold
• Auto-zero
• Auto-polarity
• FSR May be altered using resistors
• Automatic low battery indication

A single rail compact panel meter with a 4.5 digit LCD display. Features low current operation with high accuracy and high stability. Mounting is easy with the supplied snap-in bezel.

• Digit height 0.5in
• Programmable decimal points
• Continuity flags
• Autoranging outputs
• Digital hold
• Auto-zero
• Auto-polarity
• FSR May be altered using resistors
• Automatic low battery indication

The DPM 1AS-BL is an ultra-miniature 3½ digit LCD voltmeter with 5.5mm (0.22") digit height and LED backlighting. It features a negative rail generator which enables the meter to measure a signal referenced to its own power supply GND. The meter plugs directly into a SIL socket or can be snapped into a panel. Connection to the meter is via two rows of pins. The DPM 1AS-BL is intended to replace the DPM 1, DPM 1S, DPM 1-BL and DPM 1S-BL in many applications, usually requiring only minor circuit modifications. This is a popular part, normally stocked in high quantity and suitable for new designs.

• 3½ digit LCD
• 5.5mm digit height
• LED backlighting
• 3.0 to 7.5V or 6.0 to 15.0V supply option
• Programmable decimal points
• 200mV full scale reading
• Auto-zero, auto-polarity
• SIL connection

This panel mounting voltmeter is a high performance meter with an elegant appearance and low cost. The module uses a bandgap reference for extra temperature stability.

• Digit height 0.6in
• Programmable decimal points
• Auto-zero
• Auto-polarity
• FSR May be altered using resistors
• Low battery indication

This panel mounting voltmeter is a high performance meter with an elegant appearance and low cost. The module uses a bandgap reference for extra temperature stability. This single rail version features a built-in negative rail generator, enabling the meter to measure a signal referenced to its own power supply 0V.

• Digit height 0.6in
• Programmable decimal points
• Auto-zero
• Auto-polarity
• FSR May be altered using resistors
• Low battery indication

This 3.5 digit panel mounting voltmeter has a 200mV measurement range and features LED backlighting and a negative rail generator that allows the meter to measure a signal referenced to its own power supply ground. The housing design enables the meter to be easily snapped into a panel.

• Suitable for both high and low volume applications
• Digit height 0.32in
• Programmable decimal points
• Auto-zero
• Auto-polarity

A very compact panel mounting voltmeter that features a bright display with high efficiency, low current LEDs. An integral snap-in bezel makes mounting quick and easy. The small size and low cost of this module makes it suitable for high volume OEM applications.

• Digit height 8mm
• Programmable decimal points
• Auto-zero
• Auto-polarity
• FSR May be altered using resistors

This compact meter uses LEDs for the display, creating a meter that has excellent readability under all lighting conditions. The high efficiency LEDs together with the integral red filter ensure a high contrast. The meter may be easily scaled to indicate volts, amps or other engineering units and may also be used in single-ended, differential or floating input modes.

• Digit height 11mm
• Programmable decimal points
• Auto-polarity
• Auto-zero

A unique LCD meter with a compact design that has a DIL-28 IC format so that the module can be plugged directly into a DIL socket or panel mounted using the supplied snap-in bezel.

• Suitable for both high and low volume applications
• Digit height 10mm
• Programmable decimal points
• Auto-polarity
• Auto-zero
• Annunciators

This panel mounting meter is a compact unit that has a DIL-40 IC format that allows the meter to plug directly into a DIL socket or can be mounted using the snap-in bezel.

• Digit height 0.5in
• Programmable decimal points
• Auto-polarity
• Auto-zero
• Annunciators
• FSR May be altered using resistors

This panel mounting meter is a compact unit that has a DIL-40 IC format that allows the meter to plug directly into a DIL socket or can be mounted using the snap-in bezel. This single rail version has a built-in negative rail generator, enabling the meter to measure a signal referenced to its own power supply 0V.

• Digit height 0.5in
• Programmable decimal points
• Auto-polarity
• Auto-zero
• Annunciators
• FSR May be altered using resistors

A high performance LCD panel meter that has an ultra-low profile. The meter is pin for pin compatible with many existing DPMs. A very low current consumption gives a long battery life and, together with the compact size, makes this meter suitable for portable equipment.

• Digit height 0.5in
• Programmable decimal points
• Auto-polarity
• Auto-zero
• User adjustable low battery indication
• FSR May be altered using resistors

A high performance LCD panel meter that has an ultra-low profile. The meter is pin for pin compatible with many existing DPMs. A very low current consumption gives a long battery life and, together with the compact size, makes this meter suitable for portable equipment. The single rail version has a built-in negative rail generator, enabling the meter to measure a signal referenced to its own power supply 0V.

• Digit height 0.5in
• Programmable decimal points
• Auto-polarity
• Auto-zero
• User adjustable low battery indication
• FSR May be altered using resistors

This LCD panel meter features high performance and an elegant, ultra-low profile appearance. Long life LED backlighting provides a clear display in poor light conditions. Low current consumption results in a long battery life and, with the compact dimensions, makes this meter suitable for portable equipment. The single rail version has a built-in negative rail generator, enabling the meter to measure a signal referenced to its own power supply 0V.

• Digit height 0.5in
• Pin for pin compatible with many existing DPMs
• Programmable decimal points
• Auto-polarity
• Auto-zero
• User adjustable low battery indication
• FSR May be altered using resistors

This LCD panel meter has two channels that are ideal for situations where 'matched' reading are desired, e.g. voltage and current, temperature and humidity, etc. The high performance and elegant, ultra-low profile appearance together with the low current consumption and long battery life make this meter ideal for portable equipment.

• Digit height 0.25in
• Programmable decimal points
• Auto-polarity
• Auto-zero
• Common signal ground
• Annunciators
• Automatic low battery indication
• FSR May be altered using resistors

This panel meter is designed to provide an accurate, zero adjusted indication of a 4 to 20mA loop current. Calibration is via two multi-turn potentiometers that allow sensitive adjustment over a wide range. A low drift bandgap reference circuit ensures accurate reading over a wide temperature range. LED backlighting is provided that is powered from the current loop, providing a clear display, even under low light conditions. The unit is supplied with a plastic mounting bezel and there is an additional bezel available (87-6380) that will provide a waterproof seal to IP67.

• Suitable for both high and low volume applications
• Digit height 0.5in
• Programmable decimal points
• Auto-polarity
• Low volt drop

This panel meter features a low drift bandgap reference circuit that ensures accurate readings over a wide temperature range. A negative rail generator enables the meter to measure a signal referenced to its own power supply GND. LED backlighting makes the meter easy to read in low light conditions. The unit is supplied with a plastic mounting bezel and there is an additional bezel available (87-6380) that will provide a waterproof seal to IP67.

• Suitable for both high and low volume applications
• Digit height 0.5in
• Programmable decimal points
• Auto-zero
• Auto-polarity
• Low battery warning
• FSR May be altered using resistors

This panel meter features a low drift bandgap reference circuit that ensures accurate readings over a wide temperature range. A negative rail generator enables the meter to measure a signal referenced to its own power supply GND. Additional features include 5V DC operation, an enhanced contrast negative mode LCD and white LED backlighting. The unit is supplied with a plastic mounting bezel and there is an additional bezel available (87-6380) that will provide a waterproof seal to IP67.

• Suitable for both high and low volume applications
• Digit height 0.5in
• Programmable decimal points
• Auto-zero
• Auto-polarity
• Low battery warning
• FSR May be altered using resistors

This 3.5 digit LCD current loop meter is a high accuracy panel mounting unit that gives a zero corrected indication of a 4 to 20mA loop current. The meter features calibration via two 20-turn cermet potentiometers, enabling sensitive adjustment of the meter. The unit is housed in a robust carrier, which can either be bolted in place or panel mounted using the low profile bezel supplied.

• Digit height 0.75in
• Programmable decimal points
• Low volt drop
• Screw terminal connection

This 3.5 digit LCD current loop meter is a high accuracy panel mounting unit that gives a zero corrected indication of a 4 to 20mA loop current. The meter features a dual colour backlight with programmable status indication, where a threshold can be set so that a different colour backlight is displayed when the threshold is passed, a function that is ideal for quick and easy status monitoring.

• Digit height 0.75in
• Open collector outputs
• 5V Supply voltage

This 3.5 digit LCD panel meter features very low current consumption that gives a long battery life, making it ideal for portable applications. A backlight makes viewing easy in low light conditions. The meter comes with a bezel for simple and elegant panel mounting.

• Digit height 0.75in
• IDC Interface
• Auto-zero
• Auto-polarity
• Alarm annunciator
• FSR May be altered using resistors

The Lascar DPM 950S is a 3½ Digit LCD Module with a very low current consumption that results in a long battery life making the DPM950 ideal for portable equipment. The DPM 950S is the Single Rail Version fitted with a long life LED backlight.

The meter is housed in a robust carrier which can be bolted in place or panel mounted using the bezel, window and clips provided.

• 19mm Digit Height
• IDC Interface
• Auto-zero
• Auto-polarity
• 200mV DC
• Full Scale Reading (F.S.R.)
• LED Backlight
• Single Rail Version
• Alarm Annunciator
• Manufacturer's part: Lascar DPM 950S Single Rail

This 3.5 digit LCD panel meter features an enhanced negative display, with white characters on a black LCD background. White LED backlighting ensures excellent readability under all lighting conditions. A negative rail generator enables the meter to measure a signal that is referenced to its own power supply GND. Supplied with a mounting bezel.

• Digit height 0.75in
• IDC Interface
• Auto-zero
• Auto-polarity
• Alarm annunciator
• FSR May be altered using resistors

This 3.5 digit LCD panel meter features a dual colour backlight with programmable status indication, where a threshold can be set so that a different colour backlight is displayed when the threshold is passed, a function that is ideal for quick and easy status monitoring.

• Digit height 0.75in
• IDC Interface
• Auto-zero
• Auto-polarity
• Alarm annunciator
• FSR May be altered using resistors

This compact panel meter uses high efficiency LEDs which, together with the integral red filter, gives a high contrast display with excellent readability under all lighting conditions. The meter can be easily scaled to indicate voltage, current or other engineering units and may be used in single-ended, differential, ratiometric or floating input modes.

• Digit height 0.75in
• Programmable decimal points
• Auto-zero
• Auto-polarity
• FSR May be altered using resistors

A 3.5 digit LCD panel meter that will measure true rms voltage and current. Calibration of the meter is achieved via two multi-turn potentiometers that adjust offset and scale. LED backlighting makes viewing easy in low light conditions. The module is housed in a robust carrier that can be bolted in place or panel mounted, using the bezel provided.

• Digit height 0.75in
• Digital hold
• FSR May be altered using resistors
• Screw terminals

This 3.5 digit LCD thermocouple indicator can be used to indicate readings taken by K, J and T-type thermocouples. The meter will record the current value and maximum and minimum values since power-on and the values may be recalled using a connected external push button. Calibration is easily carried out using the two potentiometers located on the rear of the unit. Cold-junction compensation is used to maintain accuracy when the meter is exposed to changes in temperature.

• Digit height 0.75in
• LED Backlighting
• Housed in a robust carrier
• Supplied with bezel for panel mounting
• Screw terminals

This digital LCD thermometer is designed for panel mounting into a round hole, using the supplied bezel. A supplied NTC temperature sensor is used for high accuracy measurement.

• Digit height 0.5in
• External NTC probe with 1m cable
• °C and °F measurement
• IP67/NEMA 4X protection

A round 3.5 digit LCD panel meter that has dual voltage operation, selected by jumper links, that means there is the capability of operating in single rail mode. A round metal bezel enables panel mounting and a rubber seal gives IP67 protection.

• Digit height 8mm
• Three decimal points
• Measures voltage or current
• Auto-zero
• Auto-polarity
• Very low current consumption
• FSR May be altered using resistors
• Screw terminals
• IP67/NEMA 4X protection

A round 3.5 digit LED panel meter with a round metal bezel that enables panel mounting and a rubber seal that gives IP67 protection. The meter features very low current consumption and can measure both voltage and current.

• Digit height 8mm
• Three selectable decimal points
• Auto-zero
• Auto-polarity
• FSR May be altered using resistors
• Screw terminals
• IP67/NEMA 4X protection

A low cost, compact LCD panel meter with a 9-segment display that can indicate a measurement of voltage or current. The meter is ideal for use in applications where the order of magnitude is more important than a specific value, allowing the operator to gain a quick visual feedback.

• Suitable for low or high volume applications
• Colour scale
• Auto-zero
• No calibration required
• Quick and simple installation requiring only a single round hole
• Included rubber seal provides splashproof protection
• FSR May be altered using resistors

This elapsed time meter is a panel mounting unit that gives high accuracy measurement of two time ranges, 9999.9 or 99999 hours, with resolutions of 1/10 of an hour and 1 hour respectively. A leading zero blanking input is provided that allows the user to switch off unwanted leading zeros. The meters reading are stored in internal memory and are retained when the unit is not powered.

• Digit height 9mm
• Inputs for reset, trip and total
• Pulse output every hour
• 8 x 30cm Connection wires
• Quick and simple installation requiring only a single round hole
• Included rubber seal provides splashproof protection

This panel mounting thermometer has a built-in internal NTC sensor that will measure ambient temperature or the meter can be configured to use an external 10kΩ NTC sensor (not supplied). The thermometer has four measurement ranges and provides high accuracy measurements over a wide temperature range.

• Digit height 0.5in
• Under range and over range indication
• 5 x 30cm Connection wires
• Quick and simple installation requiring only a single round hole
• Included rubber seal provides splashproof protection

This 3.5 digit LCD meter is a panel mounting device that is quick and simple to fit, requiring only a single round hole. The meter will measure both voltage and current and the FSR may be scaled by using external resistors.

• Digit height 0.5in
• Auto-zero
• Auto-polarity
• Low battery warning
• 3 x 30cm Connection wires
• Included rubber seal provides splashproof protection

A 3.5 digit LCD meter designed to be quickly and simply panel mounted, requiring only a single round hole. The meter measures both voltage and current and the FSR may be scaled by using external resistors.

• Digit height 0.5in
• Auto-zero
• Auto-polarity
• Low battery warning
• 10 x 30cm Connection wires
• Included rubber seal provides splashproof protection

This 3 digit LCD panel meter measures and displays DC voltages, with a range of 4 to 25V DC. The meter is powered by the signal being measured and only valid readings are displayed. The unit is easy to mount, requiring just a single circular hole.

• Digit height 0.5in
• Over and under voltage indication
• Reverse polarity protection
• 2 x 30cm Connection wires
• Included rubber seal provides splashproof protection

This 3 digit LCD panel meter measures and displays DC voltages, with a range of 4 to 40V DC. The meter is powered by the signal being measured and only valid readings are displayed. The unit is easy to mount, requiring just a single circular hole.

• Digit height 0.5in
• Over and under voltage indication
• Reverse polarity protection
• 2 x 30cm Connection wires
• Included rubber seal provides splashproof protection

This sensor is a 10K NTC thermistor probe that has a measurement range of -40°C to +200°C (-40°F to +392°F). This sensor can be used as an external probe with the temperature display meter 87-6359.

• Length 1m
• Resistance tolerance 5%
• B Value Tolerance 1.3%

A 3.5 digit LCD panel meter that uses the latest miniaturisation techniques to achieve a very compact design which, together with the very low current consumption, make the meter ideal as a drop-in component for medium and high volume applications such as personal instrumentation, integral sensor indicators, measurement probes, etc.

• Digit height 8mm
• Selectable decimal points
• Auto-zero
• Auto-polarity
• FSR May be scaled using resistors
• Connection by DIL pins

A low cost 3.5 digit LED panel meter in a sub-miniature package. The low current consumption and compact dimensions make the meter suitable for battery powered applications.

• Digit height 8mm
• Selectable decimal points
• Auto-zero
• Auto-polarity
• FSR May be scaled using resistors
• Connection by DIL pins

This 3.5 digit panel meter features a bright red LED display that is easy to see in low light conditions. A display blanking facility is provided for those applications requiring low power operation. The meter has a negative rail generator that enables the meter to measure a signal referenced to its own power supply 0V. The design of the housing and the seal give splashpoof protection.

• Suitable for high and low volume applications
• Digit height 9.4mm
• Programmable decimal points
• Auto-zero
• Auto-polarity
• 5V Power supply
• FSR May be scaled using resistors
• Connection by DIL pins

This panel meter is a low-cost unit that has many features that make it suitable for both high and low volume applications. A negative rail generator enables the measurement of a signal referenced to its own power supply GND. LED Backlighting makes the display easy to read in low light conditions. The meter can be quickly and simply fitted and has a design that provides splashproof protection.

• Digit height 9.75mm
• Programmable decimal points
• Auto-zero
• Auto-polarity
• 5V Power supply
• Low battery warning
• FSR May be scaled using resistors
• Connection by DIL pins