This Finder 094.71 metal retaining clip supports Finder 94 series sockets.

The Finder 095.18 is an 8 way jumper link for interconnecting the A1 or A2 terminals for screw sockets 95.05 / 95.03 / 95.85.3 / 95.95.3. The link is rated at 10A 240V.

This Finder 095.91.3 plastic retaining clip is compatible with a wide range of Finder relay sockets and relays. Compatible with sockets 95.03 / 95.93.3 / 95.95.3 / 95.05 / 95.55 / 95.63 /95.83 / 95.85 and relay series 40 and 44. The clip has a space (6mm x 12mm) to afix a label.

The Finder 90.02 is a panel or 35mm rail mount relay socket for Finder 60.12 series relays. It is compatible with the 99.02 series of coil indication and EMC suppression modules and the 86 series timers.

• Box clamp screw terminals
• Compatible with 90 series 6-way jumper links
• Rated to 10A at 250V
• IP20 protection
• -40 to +70°C operating range
• 2kV AC dielectric strength

The Finder 90.13 is a flange mount relay socket for Finder 60.13 series relays. It is compatible with the 99.02 series of coil indication and EMC suppression modules and the 86 series timers.

• Soldering points
• M3 screw fitting
• Rated to 10A at 250V
• IP20 protection
• -40 to +70°C operating range
• 2kV AC dielectric strength

This Finder 94.04 panel or rail mount socket supports Finder 99 series EMC suppression modules and 86 series timers. It is compatible with 55.32 and 55.34 relays and 094 series 6-way jumper links. Rated for 10A at 250V it has a dielectric strength of 2000V AC.

• Box clamp screw terminal
• Panel or 35mm rail (EN 60715) mount
• Rated for 10A at 250V
• Dielectric strength 2000V AC
• IP20 rated
• -40 to +70°C operating temperature

This Finder 94.54.1 panel or rail mount socket supports Finder 99.02 series EMC suppression modules and 86.30 series timers. It is compatible with 55.32 and 55.34 relays and 094 series 6-way jumper links. Rated for 10A at 250V it has a dielectric strength of 2000V AC.

• Screwless terminals
• Panel or 35mm rail (EN 60715) mount
• Rated for 10A at 250V
• Dielectric strength 2000V AC
• IP20 rated
• -40 to +70°C operating temperature

The Finder Relay 40.31 Series Socket Type 95.13 is a relay socket to suit Finder 40 series PCB relays.

• PCB, 3.5mm or 5mm DIN rail versions
• Suitable for 40.31, 40.52 and 40.61 relays
• The DIN rail versions are available with or without clips
• Protection category IP20
• Both DIN sockets accept protection diode modules

The Finder Relay 40.52 40.61 Series Socket Type 95.15 is a relay socket to suit Finder 40 series PCB relays.

• PCB, 3.5mm or 5mm DIN rail versions
• Suitable for 40.31, 40.52 and 40.61 relays
• The DIN rail versions are available with or without clips
• Protection category IP20
• Both DIN sockets accept protection diode modules

The Finder Relay 40.31 Series Socket Type 95.63 is a relay socket to suit Finder 40 series PCB relays.

• PCB, 3.5mm or 5mm DIN rail versions
• Suitable for 40.31, 40.52 and 40.61 relays
• The DIN rail versions are available with or without clips
• Protection category IP20
• Both DIN sockets accept protection diode modules

The Finder Relay 40.52 40.61 Series Socket Type 95.75 is a relay socket to suit Finder 40 series PCB relays.

• PCB, 3.5mm or 5mm DIN rail versions
• Suitable for 40.31, 40.52 and 40.61 relays
• The DIN rail versions are available with or without clips
• Protection category IP20
• Both DIN sockets accept protection diode modules

Screw terminal / box clamp socket from the Finder 95 series, suitable for 40 series relays.

• 5 pins
• Colour: blue
• Current rating 10A
• Voltage rating 250V
• Dielectric strength 6kV
• IP20 rated

The Finder 95.85.3 relay socket is designed for either panel or rail mounting and is suitable for relay types 40.51, 40.52 and 40.61. In addition to the relay mounting position it has a socket for an EMC coil suppression and indicator module or a timer module. It is compatible with the Finder jumper links.

• Box clamp screw terminals
• Panel mount
• 35mm rail mount to EN 60715
• Rated for 10A at 250V
• 6kV isolation between coil and contacts
• Positive isolation to VDE 0106/101
• 46.8 x 81.9 x 15.5mm
• Operating temperature -40 to +70°C

A DIN Rail mounting relay socket that is designed for use with power relays.

• 8-pin Socket
• IP20 Protection
• cRU Approval

A DIN Rail mounting relay socket that is designed for use with power relays.

• 11-pin Socket
• IP20 Protection
• cRU Approval

A DIN Rail mounting relay socket that is designed for use with 4-pole 14-pin power relays.

• Compact dimensions
• Includes marking tags
• IP20 Protection

Relay base for 14-pin plug in relays.

• Ambient temperature: –40°C to 70°C
• Rated voltage: 300VAC
• Rated current: 15A per pole
• Insulation voltage: >5KV
• Protection degree: IP20
• Socket material Self–extinguishing: PA66+GF(V0)
• Hold down spring: No
• Modules on request: No
• Stew Torque: 0.6Nm
• Wire strip length: 7mm

An 8-pin relay base / socket suitable for IMO RSE series and other 8-pin relays.

• Nominal voltage 300V
• Nominal current 10A
• Ambient temperature -25 to +85°C
• Dielectric strength 2500V AC min.
• Dimensions 61.8 x 38.1 x 26.0mm
• CE and cURus approved
• IMO type SRRE8

A jumper bar/clip designed for use as part of a DIN rail mounting relay module.

• Suitable for use with the PT series of general purpose relays

This 10A 11-pin DIN rail mounting socket has been designed for use with plug-in relays.

• Suitable for use with the MT series multimode plug-in relays
• Rated voltage 240V AC
• Switching voltage 400V AC
• Screw terminals

This 10A 8-pin DIN rail mounting socket has been designed for use with plug-in relays.

• Suitable for use with the MT series multimode plug-in relays
• Rated voltage 240V AC
• Switching voltage 400V AC
• Screw terminals

This Snubber diode protection module has been designed for use with plug-in relays.

• Suitable for use with the MT series multimode plug-in relays

A 12A 400V AC 2-pole DIN rail mounting relay socket base designed to form part of a DIN rail mounting relay module.

• Suitable for use with the PT series of general purpose relays

A 110 to 230V AC green LED + diode module designed for use with DIN rail mounting relay modules.

• Suitable for use with the PT/RT series of DIN rail mounting relay modules

A 6 to 24V AC/DC green LED + diode module designed for use with DIN rail mounting relay modules.

• Suitable for use with the PT/RT series of DIN rail mounting relay modules

A 6 to 24V DC green LED + protection diode module designed for use with DIN rail mounting relay modules.

• Suitable for use with the PT/RT series of DIN rail mounting relay modules

A 230V AC varistor module designed for use ewith DIN rail mounting relay modules.

• Suitable for use with the PT/RT series of DIN rail mounting relay modules

A retaining clip designed for use as part of a DIN rail mounting relay module.

• Suitable for use with the RT series of general purpose relays

A relay jumper link designed for use as part of a DIN rail mounting relay module.

• Suitable for use with the RT series of general purpose relays

A 16A 240V AC 8-pin DIN rail mounting relay socket base designed to form part of a DIN rail mounting relay module.

• Suitable for use with the RT series of general purpose relays

A 12A 230V AC 5mm pitch DIN rail mounting relay socket base designed to form part of a DIN rail mounting relay module.

• Suitable for use with the RT series of general purpose relays

This WAGO 788-113 Two Pole Fully Insulated Jumper is rated at 18A and is supplied in a light grey colour.

• Fully insulated
• Rated at 18A
• Light Grey finish

This WAGO 788-114 Three Pole Fully Insulated Jumper is rated at 18A and is supplied in a light grey colour.

• Fully insulated
• Rated at 18A
• Light Grey finish

This WAGO 788-115 Four Pole Fully Insulated Jumper is rated at 18A and is supplied in a light grey colour.

• Fully insulated
• Rated at 18A
• Light Grey finish

This WAGO 788-116 Six Pole Fully Insulated Jumper is rated at 18A and is supplied in a light grey colour.

• Fully insulated
• Rated at 18A
• Light Grey finish

This WAGO 788-117 Eight Pole Fully Insulated Jumper is rated at 18A and is supplied in a light grey colour.

• Fully insulated
• Rated at 18A
• Light Grey finish

This WAGO 858-402 Two Pole Fully Insulated Jumper is rated at 12A and is supplied in a light grey colour.

• Fully insulated
• Rated at 12A
• Light Grey finish

This WAGO 859-408 Eight Pole Fully Insulated Jumper is rated at 18A and is supplied in a light grey colour.

• Fully insulated
• Rated at 18A
• Light Grey finish