The TMP36GT9Z is a precision, low voltage centigrade temperature sensor that provides a voltage output that is linearly proportional to the °C temperature. The sensor does not require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the -40°C to +125°C temperature range. The low output impedance of the device and its linear output and precise calibration simplify interfacing to temperature control circuitry and ADCs, and it is intended for single-supply operation from 2.7 to 5.5V maximum. The supply current runs well below 50µA, providing very low self-heating - less than 0.1°C in still air. In addition, a shutdown function is provided to cut the supply current to less than 0.5µA. The TMP36 is specified from -40°C to +125°C and provides a 750mV output at 25°C, operating to 125°C from a single 2.7V supply. The sensor is functionally compatible with the LM50, with an output scale factor of 10mV/°C.

• TO-92 Package
• Low voltage operation (2.7 to 5.5V)
• Calibrated directly in °C
• 10mV/°C scale factor
• Typical ±2°C accuracy over temperature
• Typical linearity ±0.5°C
• Stable with large capacitive loads
• Specified -40°C to +125°C, operation to +150°C
• Less than 50µA quiescent current
• Shutdown current 0.5µA max
• Low self-heating
• Qualified for automotive applications

Due to Global supply chain disruptions, we are unable to supply lead times for quantities above our current stock holding. For further delivery information please contact our sales team: sales.support@rapidonline.com

These 12-15mm CH pipe-clip temperature sensors from ATC Semitec can respond to temperature changes in less than 1 second when secured to the relevant diameter pipe in hot or cold water systems. These IP67-rated sensors give electrical security and long-term reliability when used in situations where condensation problems can occur.

• IP67 rated
• Fast response times
• Fits pipe diameters from 12 to 15mm
• Simple to install
• Manufacturer's part 103FT-7Y043

These 20-22mm CH pipe-clip temperature sensors from ATC Semitec can respond to temperature changes in less than 1 second when secured to the relevant diameter pipe in hot or cold water systems. These IP67-rated sensors give electrical security and long-term reliability when used in situations where condensation problems can occur.

• IP67 rated
• Fast response times
• Fits pipe diameters from 20 to 22mm
• Simple to install
• Manufacturer's part 103FT-7Y045

• 0.07 ºC resolution, accurate to 0.3 ºC at 20 ºC
• Automatic configuration, calibration function
• Powerful graphics software for Windows®98/NT/2000/XP
• Three-wire parallel connection of sensors

This digital temperature sensor is a fast response device with an accuracy of ±0.3K. Supplied in a through-hole TO-92 package, the sensor features an extended temperature range compared to other semiconductor temperature sensors and its 0.1K resolution further enhances usability. Ideal for use in industrial measurement and regulation systems, e.g. medical applications, battery operated systems, etc.

• High long-term stability
• Simple integration
• Sensors calibrated on manufacture