Commercial specification high density right angle D connector socket, 15 ways, 2.54mm pitch.

• Right angle orientation
• Solder termination method
• Phosphor bronze contact material
• Gold over nickel contact plating
• Tin plated shell, black colour, to allow full grounding for EM/RFI shielding
• PCB mounting type
• PCB locating spigots electrically facilitate grounding
• Supplied with jack posts threaded 4-40 UNC

Commercial D plug with 15 ways, 2.84mm pitch, straight orientation.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Tin plated steel shell material, white colour
• 5A current rating
• 1kV dielectric strength
• Gold plated stamped contacts
• Tinned and dimpled steel shells
• Allows full grounding for EM/RFI shielding
• Meets dimensional requirements of MIL-C-24308
• PBT glass reinforced insulator
• Flame retardant to UL94V-0

Commercial D socket with 15 ways, 2.84mm pitch, straight orientation.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Tin plated steel shell material, white colour
• 5A current rating
• 1kV dielectric strength
• Gold plated stamped contacts
• Tinned and dimpled steel shells
• Allows full grounding for EM/RFI shielding
• Meets dimensional requirements of MIL-C-24308
• PBT glass reinforced insulator
• Flame retardant to UL94V-0

Straight D-Sub plug for PCB mounting with 15 ways, 2.84mm pitch.

• Vertical orientation
• Solder termination method
• Gold over nickel contact plating
• Nickel plated steel shell, white colour
• 5A current rating
• 10mR contact resistance
• 1kV AC dielectric withstanding
• Flame retardant glass filled polyester insulators

Straight D-Sub socket for PCB mounting with 15 ways, 2.84mm pitch.

• Vertical orientation
• Solder termination method
• Gold over nickel contact plating
• Nickel plated steel shell, white colour
• 5A current rating
• 10mR contact resistance
• 1kV AC dielectric withstanding
• Flame retardant glass filled polyester insulators

Professional D plug with 15 ways, straight orientation, 2.77mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• PCB mounting type
• Minimum of 100 mating cycles
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

Professional D socket with 15 ways, straight orientation, 2.77mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• PCB mounting type
• Minimum of 100 mating cycles
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

Right angle D plug with 15 ways, 2.77mm pitch.

• Right angle orientation
• Solder termination method
• Phosphor bronze/brass contact material
• Gold over nickel contact plating
• Tin plated steel shell material
• PCB mounting type
• 33.32mm fixing centres
• 5A current rating
• 1kV dielectric strength
• Glass filled nylon insulator
• Plugs and sockets incorporate jack posts and PCB locating spigots
• UL Approved.

Right angle D socket with 15 ways, 2.77mm pitch.

• Right angle orientation
• Solder termination method
• Phosphor bronze/brass contact material
• Gold over nickel contact plating
• Tin plated steel shell material
• PCB mounting type
• 33.32mm fixing centres
• 5A current rating
• 1kV dielectric strength
• Glass filled nylon insulator
• Plugs and sockets incorporate jack posts and PCB locating spigots
• UL Approved.

Competitively priced top entry D connector hood with 25 ways, supplied complete with cable clamp and short jack screws.

• Straight orientation
• Black colour
• Cable mounting type
• UL 94 HB ABS insulator

IDC D-Sub plug, 25 ways, 2.84mm pitch, for direct termination to ribbon cable.

• Straight orientation
• Brass contact material
• Gold over nickel contact plating
• Tinned metal shell material
• Cable mounting type
• Tinned metal shell for extra reliability and EMI/ESD reduction
• Complete with cable strain relief
• UL Approved.

IDC D-Sub socket, 25 ways, 2.84mm pitch, for direct termination to ribbon cable.

• Straight orientation
• Phosphor bronze contact material
• Gold over nickel contact plating
• Tinned metal shell material
• Cable mounting type
• Tinned metal shell for extra reliability and EMI/ESD reduction
• Complete with cable strain relief
• UL Approved.

Competitively priced top entry D connector hood with 25 ways, supplied complete with cable clamp and short jack screws.

• Straight orientation
• Grey colour
• Cable mounting type
• UL 94 HB ABS insulator

Low profile 25-way male-to-male gender changer.

• Overall length of connector is reduced to just 17.8mm
• Fitted with male jackscrews
• Wired pin to pin
• Fully screened construction

Professional D socket with 25 ways, straight orientation, 2.84mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• 5A per contact current rating
• 300Vrms working voltage
• 1000V dielectric strength
• 5mR contact resistance
• 500 insertion cycles
• PCB mounting type
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

A black ABS cover to fit a 25-way 'D' connector.

• Top entry hood
• 25 ways
• ABS shell material
• Black colour
• Cable mounting type
• Screw locks feature long shanks with finger grips and screwdriver slots
• Hood incorporates an adjustable cable clamp
• Secured by two screws

Commercial D plug with 25 ways, 2.84mm pitch, straight orientation.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Tin plated steel shell material, white colour
• 5A current rating
• 1kV dielectric strength
• Gold plated stamped contacts
• Tinned and dimpled steel shells
• Allows full grounding for EM/RFI shielding
• Meets dimensional requirements of MIL-C-24308
• PBT glass reinforced insulator
• Flame retardant to UL94V-0

Commercial D plug with 25 ways, 2.84mm pitch, straight orientation.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Tin plated steel shell material, white colour
• 5A current rating
• 1kV dielectric strength
• Gold plated stamped contacts
• Tinned and dimpled steel shells
• Allows full grounding for EM/RFI shielding
• Meets dimensional requirements of MIL-C-24308
• PBT glass reinforced insulator
• Flame retardant to UL94V-0

Straight D-Sub plug for PCB mounting with 25 ways, 2.84mm pitch.

• Vertical orientation
• Solder termination method
• Gold over nickel contact plating
• Nickel plated steel shell, white colour
• 5A current rating
• 10mR contact resistance
• 1kV AC dielectric withstanding
• Flame retardant glass filled polyester insulators

Straight D-Sub socket for PCB mounting with 25 ways, 2.84mm pitch.

• Vertical orientation
• Solder termination method
• Gold over nickel contact plating
• Nickel plated steel shell, white colour
• 5A current rating
• 10mR contact resistance
• 1kV AC dielectric withstanding
• Flame retardant glass filled polyester insulators

Professional D plug with 25 ways, straight orientation, 2.77mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• PCB mounting type
• Minimum of 100 mating cycles
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

Professional D socket with 25 ways, straight orientation, 2.77mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• PCB mounting type
• Minimum of 100 mating cycles
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

Right angle D plug with 25 ways, 2.77mm pitch.

• Right angle orientation
• Solder termination method
• Phosphor bronze/brass contact material
• Gold over nickel contact plating
• Tin plated steel shell material
• PCB mounting type
• 47.04mm fixing centres
• 5A current rating
• 1kV dielectric strength
• Glass filled nylon insulator
• Plugs and sockets incorporate jack posts and PCB locating spigots
• UL Approved.

Right angle D socket with 25 ways, 2.77mm pitch.

• Right angle orientation
• Solder termination method
• Phosphor bronze/brass contact material
• Gold over nickel contact plating
• Tin plated steel shell material
• PCB mounting type
• 47.04mm fixing centres
• 5A current rating
• 1kV dielectric strength
• Glass filled nylon insulator
• Plugs and sockets incorporate jack posts and PCB locating spigots
• UL Approved.

Commercial high density D plug with 26 ways, 0.98mm pitch.

• Straight orientation
• Solder cup termination method
• Phosphor bronze contact material
• Gold over nickel contact plating
• Tin plated steel shell material, white colour
• PCB mounting type
• 5A current rating
• 1000V dielectric strength
• 10mR contact resistance

Competitively priced top entry D connector hood with 37 ways, supplied complete with cable clamp and short jack screws.

• Straight orientation
• Grey colour
• Cable mounting type
• UL 94 HB ABS insulator

Professional D plug with 37 ways, straight orientation, 2.77mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• PCB mounting type
• Minimum of 100 mating cycles
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

Professional D socket with 37 ways, straight orientation, 2.77mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• PCB mounting type
• Minimum of 100 mating cycles
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

Competitively priced top entry D connector hood with 9 ways, supplied complete with cable clamp and short jack screws.

• Straight orientation
• Black colour
• Cable mounting type
• UL 94 HB ABS insulator

IDC D-Sub plug, 9 ways, 2.84mm pitch, for direct termination to ribbon cable.

• Straight orientation
• Brass contact material
• Gold over nickel contact plating
• Tinned metal shell material
• Cable mounting type
• Tinned metal shell for extra reliability and EMI/ESD reduction
• Complete with cable strain relief
• UL Approved.

IDC D-Sub socket, 9 ways, 2.84mm pitch, for direct termination to ribbon cable.

• Straight orientation
• Brass contact material
• Gold over nickel contact plating
• Tinned metal shell material
• Cable mounting type
• Tinned metal shell for extra reliability and EMI/ESD reduction
• Complete with cable strain relief
• UL Approved.

Low profile 9-way female-to-female gender changer.

• Overall length of connector is reduced to just 17.8mm
• Fitted with screw receptacles
• Wired pin to pin
• Fully screened construction

Competitively priced top entry D connector hood with 9 ways, supplied complete with cable clamp and short jack screws.

• Straight orientation
• Grey colour
• Cable mounting type
• UL 94 HB ABS insulator

Metallised ABS screw lock cover with 9 ways to fit 'D' connectors with a metallised coating to improve grounding and shielding protection in data transmission against EMI/RFI interference.

• Captive screw locks feature long shanks with fingergrips and screwdriver slots
• Hood incorporates an adjustable cable clamp
• Hood is secured by two screws

Low profile 9-way male-to-male gender changer.

• Overall length of connector is reduced to just 17.8mm
• Fitted with male jackscrews
• Wired pin to pin
• Fully screened construction

Professional D plug with 9 ways, straight orientation, 2.84mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• PCB mounting type
• Minimum of 100 mating cycles
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

Professional D socket with 9 ways, straight orientation, 2.84mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• 5A per contact current rating
• 300Vrms working voltage
• 1000V dielectric strength
• 5mR contact resistance
• 500 insertion cycles
• PCB mounting type
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

A black ABS cover to fit a 9-way 'D' connector.

• Top entry hood
• 9 ways
• ABS shell material
• Black colour
• Cable mounting type
• Screw locks feature long shanks with finger grips and screwdriver slots
• Hood incorporates an adjustable cable clamp
• Secured by two screws

Commercial D plug with 9 ways, 2.84mm pitch, straight orientation.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Tin plated steel shell material, white colour
• 5A current rating
• 1kV dielectric strength
• Gold plated stamped contacts
• Tinned and dimpled steel shells
• Allows full grounding for EM/RFI shielding
• Meets dimensional requirements of MIL-C-24308
• PBT glass reinforced insulator
• Flame retardant to UL94V-0

Commercial D socket with 9 ways, 2.84mm pitch, straight orientation.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Tin plated steel shell material, white colour
• 5A current rating
• 1kV dielectric strength
• Gold plated stamped contacts
• Tinned and dimpled steel shells
• Allows full grounding for EM/RFI shielding
• Meets dimensional requirements of MIL-C-24308
• PBT glass reinforced insulator
• Flame retardant to UL94V-0

Straight D-Sub plug for PCB mounting with 9 ways, 2.84mm pitch.

• Vertical orientation
• Solder termination method
• Gold over nickel contact plating
• Nickel plated steel shell, white colour
• 5A current rating
• 10mR contact resistance
• 1kV AC dielectric withstanding
• Flame retardant glass filled polyester insulators

Straight D-Sub socket for PCB mounting with 9 ways, 2.84mm pitch.

• Vertical orientation
• Solder termination method
• Gold over nickel contact plating
• Nickel plated steel shell, white colour
• 5A current rating
• 10mR contact resistance
• 1kV AC dielectric withstanding
• Flame retardant glass filled polyester insulators

Right angle D plug with 9 ways, 2.77mm pitch.

• Right angle orientation
• Solder termination method
• Phosphor bronze/brass contact material
• Gold over nickel contact plating
• Tin plated steel shell material
• PCB mounting type
• 24.88mm fixing centres
• 5A current rating
• 1kV dielectric strength
• Glass filled nylon insulator
• Plugs and sockets incorporate jack posts and PCB locating spigots

Right angle D socket with 9 ways, 2.77mm pitch.

• Right angle orientation
• Solder termination method
• Phosphor bronze/brass contact material
• Gold over nickel contact plating
• Tin plated steel shell material
• PCB mounting type
• 24.88mm fixing centres
• 5A current rating
• 1kV dielectric strength
• Glass filled nylon insulator
• Plugs and sockets incorporate jack posts and PCB locating spigots
• UL approved.

Professional D socket with 9 ways, straight orientation, 2.77mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• PCB mounting type
• Minimum of 100 mating cycles
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

A female screw lock assembly, suitable for securing mated D connectors.

• 4-40 UNC thread
• Thread length 8mm
• Supplied in pairs

A female screw lock assembly, suitable for securing mated D connectors.

• 4-40 UNC thread
• Thread length 13mm
• Supplied in pairs

Buy Solder Lug Plug 9-Way Turned Pin from TruConnect - a professional D plug with 9 ways, straight orientation, 2.77mm pitch.

• Solder termination method
• Copper alloy contact material
• Gold over nickel contact plating
• Zinc/tin plated steel shell material
• PCB mounting type
• Minimum of 100 mating cycles
• Plugs and sockets are tin plated with dimples incorporated in male shell
• Turned pin contacts

The WAGO D-Sub Plug Connector is a field bus plug characterised by a compact design and a programming interface. Well designed with 2 horizontal cable guides for input and output, along with a fast and maintenance-free CAGE CLAMP® connection and clamping points, lockable via actuation slider. Externally operable switch for switching the scheduling on and off.

The WAGO D-Sub Plug Connector (and socket) is a field bus plug characterised by a compact design and a programming interface. Well designed with 2 horizontal cable guides for input and output, along with a fast and maintenance-free CAGE CLAMP® connection and clamping points, lockable via actuation slider. Externally operable switch for switching the scheduling on and off.