Low-cost, high quality side entry diecast hood with 9 ways from MH, suitable for demanding RFI/EMI screening requirements.

• Lightweight zinc diecast shell in nickel plated over copper finish
• Attenuation >40dB over range 30MHz to 1GHz
• Nickel plated 48mm steel jackscrews
• Cable diameter 13mm
• Re-openable
• Strain relief inserts ensure a secure termination
• Screening conforms to VDE0871, FCC 20780 and 89/336/EEC

Black snap-fit colour-coded hinged nylon top-entry 15-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 12mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Blue snap-fit colour-coded hinged nylon top-entry 15-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 12mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Red snap-fit colour-coded hinged nylon top-entry 15-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 12mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Black snap-fit colour-coded hinged nylon top-entry 25-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 12mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Light grey snap-fit colour-coded hinged nylon top-entry 25-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 12mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Red snap-fit colour-coded hinged nylon top-entry 25-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 12mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Yellow snap-fit colour-coded hinged nylon top-entry 25-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 12mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Black snap-fit colour-coded hinged nylon top-entry 37-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 14mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Black snap-fit colour-coded hinged nylon top-entry 9-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 8.4mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Blue snap-fit colour-coded hinged nylon top-entry 9-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 8.4mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Light grey snap-fit colour-coded hinged nylon top-entry 9-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 8.4mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Red snap-fit colour-coded hinged nylon top-entry 9-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 8.4mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Yellow snap-fit colour-coded hinged nylon top-entry 9-way 'D' connector cover from MH, suitable for any common D-sub connector.

• Reopenable
• Cable diameter 8.4mm
• 48mm captive steel jack screws
• Reversible cable clamp with self tapping screws
• MH MHDPPK series

Low-cost, high quality top entry diecast hood with 15 ways from MH, suitable for demanding RFI/EMI screening requirements.

• Lightweight zinc diecast shell in black chromate finish
• Attenuation >40dB over range 30MHz to 1GHz
• Black 48mm steel jackscrews
• Cable diameter 13mm
• Re-openable
• Strain relief inserts ensure a secure termination
• Screening conforms to VDE0871, FCC 20780 and 89/336/EEC

Low-cost, high quality top entry diecast hood with 15 ways from MH, suitable for demanding RFI/EMI screening requirements.

• Lightweight zinc diecast shell in nickel plated over copper finish
• Attenuation >40dB over range 30MHz to 1GHz
• Nickel plated 48mm steel jackscrews
• Cable diameter 13mm
• Re-openable
• Strain relief inserts ensure a secure termination
• Screening conforms to VDE0871, FCC 20780 and 89/336/EEC

Low-cost, high quality top entry diecast hood with 25 ways from MH, suitable for demanding RFI/EMI screening requirements.

• Lightweight zinc diecast shell in nickel plated over copper finish
• Attenuation >40dB over range 30MHz to 1GHz
• Nickel plated 48mm steel jackscrews
• Cable diameter 13mm
• Re-openable
• Strain relief inserts ensure a secure termination
• Screening conforms to VDE0871, FCC 20780 and 89/336/EEC

Low-cost, high quality top entry diecast hood with 9 ways from MH, suitable for demanding RFI/EMI screening requirements.

• Lightweight zinc diecast shell in nickel plated over copper finish
• Attenuation >40dB over range 30MHz to 1GHz
• Nickel plated 48mm steel jackscrews
• Cable diameter 13mm
• Re-openable
• Strain relief inserts ensure a secure termination
• Screening conforms to VDE0871, FCC 20780 and 89/336/EEC

Fast assembly, high quality diecast D hood with 25 ways from MH, suitable for RFI/EMI screening requirements.

• Lightweight nickel plated zinc diecast shell
• Turned metal 4-40 UNC thumbscrews
• 4 size plastic grommet set
• Attenuation >40dB from 30Mhz to 1Ghz

Re-openable low profile 45° 9-pole D connector cover from MH moulded in flame retardant (UL94V-0) black ABS.

• Supplied with full metal 4-40 thumb screws
• Covers are supplied with four strain relief inserts which accommodate cable sizes from 3.5 to 13mm diameter

The MHDB series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Male 15-way type
• Stamped and formed
• Rating 250V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

The MHDB series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Female 15-way type
• Stamped and formed
• Rating 250V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

The MHDB series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Male 25-way type
• Stamped and formed
• Rating 250V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

The MHDB series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Female 25-way type
• Stamped and formed
• Rating 250V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

The MHDB series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Male 9-way type
• Stamped and formed
• Rating 250V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

The MHDB series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Female 9-way type
• Stamped and formed
• Rating 250V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

Dust cover from MH, suitable for use with 15-way male D-Sub connectors.

• Made from polyethylene material
• Transparent colour
• Manufacturer's part MHDC 915-P

Dust cover from MH, suitable for use with 9-way male D-Sub connectors.

• Made from polyethylene material
• Translucent colour
• Manufacturer's part MHDC 9-P

Dust cover from MH, suitable for use with 9-way female D-Sub connectors.

• Made from polyethylene material
• Transparent colour
• Manufacturer's part MHDC 9-S

High quality die-cast D connector hood with 15 ways from MH giving exceptional RFI/EMI shielding.

• Allows rapid assembly while the use of metallised plastic inserts gives 360° shielding at the cable entry area
• Supports all types of cable
• Nickel-coloured zinc shell with metallised plastic insert
• Straight orientation

The MHDM series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Male 15-way type
• Machined
• Rating 125V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

The MHDM series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Female 15-way type
• Machined
• Rating 125V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

High quality die-cast D connector hood with 25 ways from MH giving exceptional RFI/EMI shielding.

• Allows rapid assembly while the use of metallised plastic inserts gives 360° shielding at the cable entry area
• Supports all types of cable
• Nickel-coloured zinc shell with metallised plastic insert
• Straight orientation

The MHDM series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Male 25-way type
• Machined
• Rating 125V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

The MHDM series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Female 25-way type
• Machined
• Rating 125V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

High quality die-cast D connector hood with 9 ways from MH giving exceptional RFI/EMI shielding.

• Allows rapid assembly while the use of metallised plastic inserts gives 360° shielding at the cable entry area
• Supports all types of cable
• Nickel-coloured zinc shell with metallised plastic insert
• Straight orientation

The MHDM series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Male 9-way type
• Machined
• Rating 125V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

The MHDM series are a range of cable mounting 5A D-Sub connectors that have been designed for applications that require rugged and robust I/O connectors.

• Female 9-way type
• Machined
• Rating 125V
• Solder cup termination
• Metal shell
• Insulation resistance 1000MΩ
• Operating temperature -55°C to +105°C
• Rated to UL94 V-0

Top entry 25-way D connector cover from MH moulded in ABS with a nickel over copper plating to improve grounding and shielding protection against EMI/RFI interference.

• Straight orientation
• Cable diameter 13mm
• Supplied with full metal 4-40 thumb screws
• Supplied with four strain relief inserts

Top entry 9-way D connector cover from MH moulded in ABS with a nickel over copper plating to improve grounding and shielding protection against EMI/RFI interference.

• Straight orientation
• Cable diameter 13mm
• Supplied with full metal 4-40 thumb screws
• Supplied with four strain relief inserts

Re-openable top entry 37-pole D connector cover from MH moulded in flame retardant (UL94V-0) black ABS.

• Supplied with full metal 4-40 thumb screws
• Covers are supplied with four strain relief inserts which accommodate cable sizes from 3.5 to 13mm diameter

Re-openable top entry 15-pole D connector cover from MH moulded in flame retardant (UL94V-0) black ABS.

• Supplied with full metal 4-40 thumb screws
• Covers are supplied with four strain relief inserts which accommodate cable sizes from 3.5 to 13mm diameter

Re-openable top entry 25-pole D connector cover from MH moulded in flame retardant (UL94V-0) black ABS.

• Supplied with full metal 4-40 thumb screws
• Covers are supplied with four strain relief inserts which accommodate cable sizes from 3.5 to 13mm diameter

Re-openable top entry 9-pole D connector cover from MH moulded in flame retardant (UL94V-0) black ABS.

• Supplied with full metal 4-40 thumb screws
• Covers are supplied with four strain relief inserts which accommodate cable sizes from 3.5 to 13mm diameter

Fast assembly, high quality diecast D hood with 9 ways from MH, suitable for RFI/EMI screening requirements.

• Lightweight nickel plated zinc diecast shell
• Turned metal 4-40 UNC thumbscrews
• 4 size plastic grommet set
• Attenuation >40dB from 30Mhz to 1Ghz

D connector cover with 9 ways.

• For 9-way connectors see (order codes 15-0500 and 15-0525)
• 9-way case will also accept high-density monitor connectors

Robust Phoenix Contact Variosub D-Sub Connector Plug with 15 ways, suitable for industrial use.

• IP67 rated
• Can be individually coded or marked with identification labels
• Includes grommet, mounting frame, two cable glands, coding profiles, identification plate, EMC design with internal grommet and EMC shield

The Phoenix Contact D-Sub 15-Pin Connector Variosub can be coded individually; identification plate for labelling; robust design for industrial use. Consists of grommet, mounting frame, two cable glands, coding profiles, identification plate, EMC design with internal grommet and EMC shield.

• Can be individually coded or marked with identification labels
• Unshielded/standard

The Phoenix Contact D-Sub 9-Pin Connector Variosub can be coded individually; identification plate for labelling; robust design for industrial use. Consists of grommet, mounting frame, two cable glands, coding profiles, identification plate, EMC design with internal grommet and EMC shield.

• Can be individually coded or marked with identification labels
• Unshielded/standard

The Phoenix Contact D-SUB Series Plug SUBCON-PLUS-CAN/SC2 is specifically designed for use in PROFIBUS and CAN-Systems, allowing under field conditions and comfortable and fast connection of incoming and continuative bus cables. The terminating resistor is already integrated in all versions and can be switched by a slide from the outside. The high quality shielded connector housing also ensures maximum transmission rate at the highest noise immunity.

• Number of pins: 9
• Two cable entries less than 35° to two terminal block rows
• Weight 40.60g