This A-20040 RJ10 Socket Cable Mount Black from Assmann WSW is a tall, right-angled, socket with rounded back and 4 pins.

Manufactured with phosphor bronze contacts and nylon UL94V-0 insulator material, this unshielded female socket offers 40MΩ max. contact resistance, plus an operating voltage of 125V DC.

• 1.5A current rating
• Ni, Au/Sn plating
• 1000V AC test voltage
• 1000MW min insulation resistance
• Manufacturer's part A-20040

This A-20040/LP RJ10 Black Socket from Assmann WSW is a low-profile, right-angled, socket with 4 pins.

Manufactured with phosphor bronze contacts and glass filled polyester housing, this unshielded female socket offers an operating voltage of 125V AC rms.

• 1.5A current rating
• Gold plating
• Manufacturer's part A-20040/LP

This A-20041 RJ12 Socket Cable Mount Black from Assmann WSW is a tall, right-angled, socket with rounded back and 6 pins.

Manufactured with phosphor bronze contacts and nylon UL94V-0 insulator material, this unshielded female socket offers 40MΩ max. contact resistance, plus an operating voltage of 125V DC.

• 1.5A current rating
• Ni, Au/Sn plating
• 1000V AC test voltage
• 1000MW min insulation resistance
• Manufacturer's part A-20041

This A-20041/LP RJ12 Black Socket from Assmann WSW is a low-profile, right-angled, socket with 6 pins.

Manufactured with phosphor bronze contacts and glass filled polyester housing, this unshielded female socket offers an operating voltage of 125V AC rms.

• 1.5A current rating
• Gold plating
• Manufacturer's part A-20041/LP

This 4-Pin RJ11 Socket from Assmann WSW features a 90° cable entry with phosphor bronze, gold plated contacts, allowing the connection of hardware to a network. Equipped with a side metal fixing pin, the housing material has been manufactured with polyamide.

• Unshielded SMD version 90° with side metal fixing pin
• Housing material: polyamide
• Contact Material: Phosphor Bronze
• Contact Finish: 6μ Gold
• Supplied as 6-pin RJ12

This A-20042 RJ45 Socket Cable Mount Black from Assmann WSW is a tall, right-angled, socket with rounded back and 8 pins.

Manufactured with phosphor bronze contacts and nylon UL94V-0 insulator material, this unshielded female socket offers 40MΩ max. contact resistance, plus an operating voltage of 125V DC.

• 1.5A current rating
• Ni, Au/Sn plating
• 1000V AC test voltage
• 1000MW min insulation resistance
• Manufacturer's part A-20042

This A-20042/LP RJ45 Black Socket from Assmann WSW is a low-profile, right-angled, socket with 8 pins.

Manufactured with phosphor bronze contacts and glass filled polyester housing, this unshielded female socket offers an operating voltage of 125V AC rms.

• 1.5A current rating
• Gold plating
• Manufacturer's part A-20042/LP

This A-20042-LP/FS RJ45 Silver Socket from Assmann WSW is a low-profile, right-angled, socket with 8 pins.

Manufactured with phosphor bronze contacts and glass filled polyester housing, this fully shielded female socket offers a voltage rating of 125V AC rms.

• 1.5A current rating
• 6µ" gold plating
• Manufacturer's part A-20042-LP/FS

This A-20140 RJ10 Black Socket from Assmann WSW is a cube-shaped socket with 4 pins.

Manufactured with phosphor bronze contacts and nylon UL94V-0 insulator material, this unshielded female socket offers 40MΩ max. contact resistance, plus an operating voltage of 125V DC.

• 4P4C RJ10
• 1.5A current rating
• Ni, Au/Sn plating
• 1000V AC test voltage
• 1000MW min insulation resistance
• Manufacturer's part A-20140

This A-20141 RJ12 Black Socket from Assmann WSW is a cube-shaped socket with 6 pins.

Manufactured with phosphor bronze contacts and nylon UL94V-0 insulator material, this unshielded female socket offers 40MΩ max. contact resistance, plus an operating voltage of 125V DC.

• 1.5A current rating
• Ni, Au/Sn plating
• 1000V AC test voltage
• 1000MW min insulation resistance
• Manufacturer's part A-20141

This A-20142 RJ45 Socket Black from Assmann WSW is a cube-shaped socket with 8 pins.

Manufactured with phosphor bronze contacts and nylon UL94V-0 insulator material, this unshielded female socket offers 40MΩ max. contact resistance, plus an operating voltage of 125V DC.

• 1.5A current rating
• Ni, Au/Sn plating
• 1000V AC test voltage
• 1000MW min insulation resistance
• Manufacturer's part A-20142

This A-20142-LP/FS RJ45 Socket Black from Assmann WSW is a cube-shaped modular socket with 8 pins. Manufactured with phosphor bronze contacts and polyester, glass filled housing, this 180° (top entry) shielded female socket is ideal for a printed circuit board, with fastening peg.

• 1.5A current rating
• 6μ" gold contact finish
• Manufacturer's part A-20142-LP/FS

This female coupler enables two RJ11 modular cords with male connectors to be joined together.

Transparent cable mounts, suitable for use in telecommunications and in IT connections.

• Connector size RJ10
• Number of pins 4p4c

Transparent cable mounts, suitable for use in telecommunications and in IT connections.

• Connector size RJ12
• Number of pins 6p6c

This ESKA Bulgin panel mount shielded CAT5e adaptor features RJ45 connectors front and rear for ease of assembly.

• Protection to IP68
• Shielded
• Mates with PX0836, PX0837 PX0838, PX0834

This ESKA Bulgin IP68 connector shroud accepts standard CAT5 connectors with a cable with Ø 3.5 to 8mm. Remove the connector's latch before assembly.

This ESKA Bulgin PCB mounted socket has a shielded CAT5e RJ-45 interface used for panel mounting. The socket is intended to be soldered to a PCB and the whole assembly fitted to a panel or an enclosure. Allows volume production without additional cables.

An UTP Cat5e RJ45 feed through connector mounted in a plastic XLR format body shell with countersunk mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• UTP Cat5e RJ45 feed through connector in a standard plastic XLR shell
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30220

A UTP Cat5e RJ45 feed through connector mounted in a metal XLR format body shell with countersunk mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• UTP Cat5e RJ45 feed through connector in a standard metal XLR shell
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30220M

The Cliff CP30220M3B UTP Cat5e RJ45 to RJ45 feed through data connector with black metal frame, fits into cut-outs for the industry-standard XLR connector format and features threaded M3 mounting holes, facilitating simple panel assembly, without the need for securing nuts and washers.

One connector supplied only.

• Double-sided, with a connector on back and front -- no wire tails at back
• M3 threaded mounting holes speed assembly
• Facilitates simple panel assembly without need for securing nuts and washers
• Fits into cut-outs for industry-standard XLR connector format
• Metal version in black

An FTP Cat5e RJ45 shielded feed through connector mounted in a plastic XLR format body shell with countersunk mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• FTP Cat5e RJ45 shielded feed through connector in a standard plastic XLR shell
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30220S

A FTP Cat6 RJ45 to RJ45 Shielded feed through connector mounted in a metal XLR format body shell with countersunk mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• FTP Cat6 RJ45 to RJ45 Shielded feed through connector in a standard metal XLR shell
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30220SM

An FTP Cat5e RJ45 shielded feed through connector mounted in a plastic XLR format body shell with plain mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• FTP Cat5e RJ45 shielded feed through connector in a standard plastic XLR shell
• Plain mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30220SX

The Cliff CP30220W is a RJ45 Cat5e Feedthrough Connector in white with countersunk holes.

One connector supplied only.

• Fits a standard XLR Ø24mm cutout
• No soldering or punch termination
• Low rear profile
• Countersunk (CSK) fixing holes
• Dimensions (H x W x D): 31 x 26 x 30mm

An UTP Cat5e RJ45 feed through connector mounted in a plastic XLR format body shell with plain mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• UTP Cat5e RJ45 feed through connector in a standard plastic XLR shell
• Plain mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30220X

The Cliff CP30220XW is a RJ45 Cat5e Feedthrough Connector in white.

One connector supplied only.

• Fits a standard XLR Ø24mm cutout
• No soldering or punch termination
• Low rear profile
• Dimensions (HxWxD): 31 x 26 x 30mm

A UTP Cat6 RJ45 to RJ45 feed through connector mounted in a metal XLR format body shell with countersunk mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• UTP Cat6 RJ45 to RJ45 feed through connector in a standard metal XLR shell
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30222M

An FTP Cat6 RJ45 shielded feed through connector mounted in a plastic XLR format body shell with countersunk mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• FTP Cat6 RJ45 shielded feed through connector in a standard plastic XLR shell
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30222S

An HDMI A female feed through connector mounted in a metal XLR format body shell with countersunk mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• FTP Cat6 RJ45 to RJ45 Shielded feed through connector in a standard metal XLR shell
• Countersunk mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30222SM

The Cliff CP30222SM3 FTP Cat6 RJ45 to RJ45 feed through data connector with shielded metal frame fits into cut-outs for the industry-standard XLR connector format and features threaded M3 mounting holes, facilitating simple panel assembly, without the need for securing nuts and washers.

One connector supplied only.

• Double-sided, with a connector on back and front -- no wire tails at back
• M3 threaded mounting holes speed assembly
• Facilitates simple panel assembly without need for securing nuts and washers
• Fits into cut-outs for industry-standard XLR connector format
• Metal version in silver

An FTP Cat6 RJ45 shielded feed through connector mounted in a plastic XLR format body shell with plain mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• FTP Cat6 RJ45 shielded feed through connector in a standard plastic XLR shell
• Plain mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30222SX

An UTP Cat6 RJ45 feed through connector mounted in a plastic XLR format body shell with plain mounting holes - part of the FT Series from Cliff'.

Cliff's FT Series of feed through connectors is perfect for custom I/O configurations on wall-plates, rack panels, etc., because all of the connectors in the series are housed in a standard XLR shell and fit into a standard XLR panel cutout. Standard cables are used for external and internal connections, so no soldering or punching is necessary, just use the standard cable for that particular connector style. The connectors can be mounted from either the front or the back of the panel and their low rear profile can accommodate the tightest 'behind the panel' spaces.

• UTP Cat6 RJ45 feed through connector in a standard plastic XLR shell
• Plain mounting holes
• Fits standard XLR panel cut-out
• Cliff type CP30220S

The Cliff CP30227 is a Cat6 RJ45 socket to an IDC feedthrough connector with countersunk mounting holes.

One connector supplied only.

• No soldering or punch termination
• Uses standard cable for each connector style
• Fits a standard XLR Ø24mm cutout
• Front or rear mounted
• Low rear profile

The Cliff CP30227 is a Cat6 RJ45 socket to IDC feedthrough connector with countersunk mounting holes.

One connector supplied only.

• No soldering or punch termination,
• Uses standard cable for each connector style
• Fits a standard XLR Ø24mm cutout
• Front or rear mounted
• Low rear profile

The Cliff CP30285 is a black dust cover for use with XLR feedthrough connectors.

One cover supplied only.

• Compatible with Cliff feedthrough Series RJ45, USB2/3-A, USB2-B, USB3-B, USB-C and HDMI Connectors.

The Cliff CP30285L is a blue dust cover for use with XLR feedthrough connectors.

One cover supplied only.

• Compatible with Cliff feedthrough Series RJ45, USB2/3-A, USB2-B, USB3-B, USB-C and HDMI Connectors.

The Cliff CP30285R is a red dust cover for use with XLR feedthrough connectors.

One cover supplied only.

• Compatible with Cliff feedthrough Series RJ45, USB2/3-A, USB2-B, USB3-B, USB-C and HDMI Connectors.

The Cliff CP30290 is a set of 10 lanyards for use with all feedthrough dust covers.

• Supplied in packs of 10

The Cliff CP30291 is a black RJ45 dust cover designed to fit feedthrough connectors. They simply push in to the front of the RJ45 port to reduce the ingress of dust and dirt.

• For use with RJ45 connectors
• Compatible with the Cliff CP30290 lanyard set

The Cliff CP30500C Black Finished Brushed Aluminium 4-Way Faceplate features mounting holes for four XLR-format connectors.

Supplied with the CLIFF logo.

• Suitable for all panel mount XLR connectors

The Cliff CP306020 is a RJ45 Cat5e socket to RJ45 Cat5e socket. Slim profile feedthrough connector constructed from Polyamide UL94.

One socket supplied only.

• Fits standard rectangular cutout
• No soldering or punch termination
• Low rear profile
• Countersunk holes
• Dimensions (H x W x D): 35.5 x 19 x 29.3mm

The Cliff CP306020S is a RJ45 Cat5e shielded socket to RJ45 Cat5e shielded socket. Slim profile feedthrough connector constructed from Polyamide UL94.

One socket supplied only.

• Fits standard rectangular cutout
• No soldering or punch termination
• Low rear profile
• Countersunk holes
• Dimensions (H x W x D): 35.5 x 19 x 33.3mm

The Cliff CP306022 is a RJ45 Cat6 socket to RJ45 Cat6 socket. Slim profile feedthrough connector constructed from Polyamide UL94.

One socket supplied only.

• Fits standard rectangular cutout
• No soldering or punch termination
• Low rear profile
• Countersunk holes
• Dimensions (H x W x D): 35.5 x 19 x 29.3mm

The Cliff CP306022S is a RJ45 Cat6 shielded socket to RJ45 Cat5e shielded socket . Slim profile feedthrough connector constructed from Polyamide UL94.

One socket supplied only.

• Fits standard rectangular cutout
• No soldering or punch termination
• Low rear profile
• Countersunk holes
• Dimensions (H x W x D): 35.5 x 19 x 29.3mm

This Black RJ45 IP67 Cat 5e Connector from Conec features a shielded Cat 5e inline coupler which has been designed for front or rear panel mounting, up to a wall thickness of 3.2mm. Equipped with bayonet locking, black plastic housing and protection cap, while the contacts have been manufactured with phosphor bronze and gold plating.

• Black plastic body and cap
• Panel mounted connector
• Cat 5e network specification
• IP67 protection
• Shielded inline coupling
• 20mOhm max contact resistance
• 500mOhm min. @ 100V DC insulation resistance
• 1.2A max. at 25°C current rating
• 100V DC working voltage
• -40°C to +85°C operating temperature
• Manufacturer's part 17-10000

This Black RJ45-IP67 Cat 5e Shielded Plug from Conec features a plastic coupling ring with bayonet locking, and is suitable for cable size AWG24. Designed with plastic housing and straight mounting angle, while the contacts have been manufactured with phosphor bronze and gold plating.

• Plastic housing
• Plastic cable fitting
• Panel mounted connector
• Cat 5e network specification
• IP67 protection
• 20mOhm max. contact resistance
• 500mOhm min. @ 100V DC insulation resistance
• 1.2A max. at 25°C current rating
• 100V DC working voltage
• -40°C to +85°C operating temperature
• Manufacturer's part 17-10001

This Black IP67 Protective Cover from Conec is for an industrial ethernet connector and is manufactured with plastic material. It can be used to protect unused interfaces and comes equipped with bayonet locking and a tether.

• IP67 protection
• Black, polyester cover coupling ring
• Black, polycarbonate tether
• Red, silcone cover gasket
• Ø 31.5mm cover coupling ring
• -40°C to +85°C operating temperature
• Manufacturer's part 17-10002

This Metallised RJ45 IP67 Cat 5e Connector from Conec features a shielded Cat 5e inline coupler which has been designed for front or rear panel mounting, up to a wall thickness of 3.2mm. Equipped with bayonet locking, metallised housing and protection cap, while the contacts have been manufactured with phosphor bronze and gold plating.

• Metallised body and cap
• Panel mounted connector
• Cat 5e network specification
• IP67 protection
• Shielded inline coupling
• 20mOhm max contact resistance
• 500mOhm min. @ 100V DC insulation resistance
• 1.2A max. at 25°C current rating
• 100V DC working voltage
• -40°C to +85°C operating temperature
• Manufacturer's part 17-10011

This Metallised RJ45-IP67 Cat 5e Shielded Plug from Conec features a plastic coupling ring with bayonet locking, and is suitable for cable size AWG24. Designed with plastic housing and straight mounting angle, while the contacts have been manufactured with phosphor bronze and gold plating.

• Plastic housing
• Metal cable fitting
• Panel mounted connector
• Cat 5e network specification
• IP67 protection
• 20mOhm max. contact resistance
• 500mOhm min. @ 100V DC insulation resistance
• 1.2A max. at 25°C current rating
• 100V DC working voltage
• -40°C to +85°C operating temperature
• Manufacturer's part 17-10013