This watertight black ABS enclosure from the Hammond 1553 Series is ergonomically designed and has soft sides for handheld comfort.

• Colour: black
• Overall dimensions: 117 x 79 x 25mm
• Designed to meet IP65
• Uses single-piece silicone gasket (installed)
• Enclosure utilises tongue and groove construction - moulded into top and bottom halves
• Made from flame retardant ABS plastic (FRABS) - UV stabilised
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into both top and bottom. Standoff screws (M2) not included
• Front panel is an integral part of the top half of the enclosure
• Secured with black Philips stainless steel machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• Manufacturer's part 1553WBBK

This watertight grey ABS enclosure from the Hammond 1553 Series is ergonomically designed and has soft sides for handheld comfort.

• Colour: grey
• Overall dimensions: 117 x 79 x 25mm
• Designed to meet IP65
• Uses single-piece silicone gasket (installed)
• Enclosure utilises tongue and groove construction - moulded into top and bottom halves
• Made from flame retardant ABS plastic (FRABS) - UV stabilised
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into both top and bottom. Standoff screws (M2) not included
• Front panel is an integral part of the top half of the enclosure
• Secured with black Philips stainless steel machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• Manufacturer's part 1553WBGY

This watertight black ABS enclosure from the Hammond 1553 Series is ergonomically designed and has soft sides for handheld comfort.

• Colour: black
• Overall dimensions: 117 x 79 x 32mm
• Designed to meet IP65
• Uses single-piece silicone gasket (installed)
• Enclosure utilises tongue and groove construction - moulded into top and bottom halves
• Made from flame retardant ABS plastic (FRABS) - UV stabilised
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into both top and bottom. Standoff screws (M2) not included
• Front panel is an integral part of the top half of the enclosure
• Secured with black Philips stainless steel machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• Manufacturer's part 1553WCBK

This watertight grey ABS enclosure from the Hammond 1553 Series is ergonomically designed and has soft sides for handheld comfort.

• Colour: grey
• Overall dimensions: 117 x 79 x 32mm
• Designed to meet IP65
• Uses single-piece silicone gasket (installed)
• Enclosure utilises tongue and groove construction - moulded into top and bottom halves
• Made from flame retardant ABS plastic (FRABS) - UV stabilised
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into both top and bottom. Standoff screws (M2) not included
• Front panel is an integral part of the top half of the enclosure
• Secured with black Philips stainless steel machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• Manufacturer's part 1553WCGY

This watertight black ABS enclosure from the Hammond 1553 Series is ergonomically designed and has soft sides for handheld comfort.

• Colour: black
• Overall dimensions: 147 x 89 x 25mm
• Designed to meet IP65
• Uses single-piece silicone gasket (installed)
• Enclosure utilises tongue and groove construction - moulded into top and bottom halves
• Made from flame retardant ABS plastic (FRABS) - UV stabilised
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into both top and bottom. Standoff screws (M2) not included
• Front panel is an integral part of the top half of the enclosure
• Secured with black Philips stainless steel machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• Manufacturer's part 1553WDBK

Hand-held Instrument enclosure made from translucent blue ABS material, 66mm length, 66mm width, 28mm height.

• UL-94HB flame resistance rating
• Ergonomically designed for a comfortable fit into the user's hand
• Moulded in translucent blue ABS plastic
• Satin texture finish
• Recessed top for membrane display or pad
• Units with battery door use long life three snap door
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping black screws
• Ideally suited for mounting printed circuit boards
• Hammond 1593 Series

ProtoBoard printed circuit board, high quality FR4 glass epoxy board, lead free, etched copper PCB (single sided) with a flux coating for easy soldering, for use with Hammond 1593KBK And 1593KGY Enclosures.

Hand-held Instrument enclosure made from translucent blue ABS material, 66mm length, 66mm width, 28mm height.

• UL-94HB flame resistance rating
• Ergonomically designed for a comfortable fit into the user's hand
• Moulded in translucent blue ABS plastic
• Satin texture finish
• Recessed top for membrane display or pad
• Units with battery door use long life three snap door
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping black screws
• Ideally suited for mounting printed circuit boards
• Hammond 1593 Series

ProtoBoard printed circuit board, high quality FR4 glass epoxy board, lead free, etched copper PCB (single sided) with a flux coating for easy soldering, for use with Hammond 1593LTBU enclosures.

Hand-held Instrument enclosure made from translucent blue ABS material, 92mm length, 66mm width, 28mm height.

• UL-94HB flame resistance rating
• Ergonomically designed for a comfortable fit into the user's hand
• Moulded in translucent blue ABS plastic
• Satin texture finish
• Recessed top for membrane display or pad
• Units with battery door use long life three snap door
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping black screws
• Ideally suited for mounting printed circuit boards
• Hammond 1593 Series

Hand-held Instrument enclosure made from translucent blue ABS material, 110mm length, 75mm width, 25mm height.

• UL-94HB flame resistance rating
• Ergonomically designed for a comfortable fit into the user's hand
• Moulded in translucent blue ABS plastic
• Satin texture finish
• Recessed top for membrane display or pad
• Units with battery door use long life three snap door
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping black screws
• Ideally suited for mounting printed circuit boards
• Hammond 1593 Series

ProtoBoard printed circuit board, high quality FR4 glass epoxy board, lead free, etched copper PCB (single sided) with a flux coating for easy soldering, for use with Hammond 1593PTBU enclosures.

Hand-held Instrument enclosure made from translucent blue ABS material, 92mm length, 66mm width, 28mm height.

• UL-94HB flame resistance rating
• Ergonomically designed for a comfortable fit into the user's hand
• Moulded in translucent blue ABS plastic
• Satin texture finish
• Recessed top for membrane display or pad
• Units with battery door use long life three snap door
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping black screws
• Ideally suited for mounting printed circuit boards
• Hammond 1593 Series

ProtoBoard printed circuit board, high quality FR4 glass epoxy board, lead free, etched copper PCB (single sided) with a flux coating for easy soldering, for use with Hammond 1593QTBU enclosures.

Hand-held Instrument enclosure made from translucent blue ABS material, 112mm length, 66mm width, 28mm height.

• UL-94HB flame resistance rating
• Ergonomically designed for a comfortable fit into the user's hand
• Moulded in translucent blue ABS plastic
• Satin texture finish
• Recessed top for membrane display or pad
• Units with battery door use long life three snap door
• Lap joint construction provides protection against dust accumulation and splashing water
• Unit secured with self-tapping black screws
• Ideally suited for mounting printed circuit boards
• Hammond 1593 Series

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS black plastic.

• Size (L x W x H) 130 x 65 x 25mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599BBK

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS black plastic. This enclosure has a removable battery door.

• Size (L x W x H) 130 x 65 x 25mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599BBKBAT

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS grey plastic.

• Size (L x W x H) 130 x 65 x 25mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599BGY

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS grey plastic. This enclosure has a removable battery door.

• Size (L x W x H) 130 x 65 x 25mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599BGYBAT

This attractively styled, grey ABS enclosure from Hammond is designed primarily for hand-held instruments. Lap joint construction provides protection against intrusion from dust and splashing water. Two keyhole knockouts are moulded into the inside of the base to facilitate wall mounting.

• Recessed top for membrane or pad display
• Extra deep top and ultra shallow base
• IP rating IP54
• Size (L x W x H) 130 x 65 x 25mm
• Manufacturer's part 1599BSGY

This attractively styled, grey ABS enclosure with battery compartment from Hammond is perfect for applications where repetitive assembly and disassembly is required. Lap joint construction provides protection against intrusion from dust and splashing water. Moulded from flame retardant ABS plastic with a UL Flammability Rating of 94V-0. Lid is secured with Phillips screws threaded into tapped integral brass bushings.

• Recessed top for membrane or pad display
• Extra deep top and ultra shallow base
• IP rating IP54
• Size (L x W x H) 130 x 65 x 25mm
• Manufacturer's part 1599BSGYBAT

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS black plastic. This enclosure has a removable battery door.

• Size (L x W x H) 170 x 85 x 34mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599EBKBAT

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS grey plastic.

• Size (L x W x H) 170 x 85 x 34mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599EGY

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS grey plastic. This enclosure has a removable battery door.

• Size (L x W x H) 170 x 85 x 34mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599EGYBAT

This attractively styled, grey ABS enclosure from Hammond is designed primarily for hand-held instruments. Lap joint construction provides protection against intrusion from dust and splashing water. Two keyhole knockouts are moulded into the inside of the base to facilitate wall mounting.

• Recessed top for membrane or pad display
• Extra deep top and ultra shallow base
• IP rating IP54
• Size (L x W x H) 170 x 85 x 34mm
• Manufacturer's part 1599ESGY

This attractively styled, grey ABS enclosure with battery compartment from Hammond is perfect for applications where repetitive assembly and disassembly is required. Lap joint construction provides protection against intrusion from dust and splashing water. Moulded from flame retardant ABS plastic with a UL Flammability Rating of 94V-0. Lid is secured with Phillips screws threaded into tapped integral brass bushings.

• Recessed top for membrane or pad display
• Extra deep top and ultra shallow base
• IP rating IP54
• Size (L x W x H) 170 x 85 x 34mm
• Manufacturer's part 1599ESGYBAT

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS black plastic.

• Size (L x W x H) 220 x 110 x 44mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599HBK

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS black plastic. This enclosure has a removable battery door.

• Size (L x W x H) 220 x 110 x 44mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599HBKBAT

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS grey plastic.

• Size (L x W x H) 220 x 110 x 44mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599HGY

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS grey plastic. This enclosure has a removable battery door.

• Size (L x W x H) 220 x 110 x 44mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599HGYBAT

This attractively styled, grey ABS enclosure from Hammond is designed primarily for hand-held instruments. Lap joint construction provides protection against intrusion from dust and splashing water. Two keyhole knockouts are moulded into the inside of the base to facilitate wall mounting.

• Recessed top for membrane or pad display
• Extra deep top and ultra shallow base
• IP rating IP54
• Size (L x W x H) 220 x 110 x 44mm
• Manufacturer's part 1599HSGY

This attractively styled, grey ABS enclosure with battery compartment from Hammond is perfect for applications where repetitive assembly and disassembly is required. Lap joint construction provides protection against intrusion from dust and splashing water. Moulded from flame retardant ABS plastic with a UL Flammability Rating of 94V-0. Lid is secured with Phillips screws threaded into tapped integral brass bushings.

• Recessed top for membrane or pad display
• Extra deep top and ultra shallow base
• IP rating IP54
• Size (L x W x H) 220 x 110 x 44mm
• Manufacturer's part 1599HSGYBAT

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS black plastic.

• Size (L x W x H) 220 x 140 x 40mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599KBK

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS black plastic. This enclosure has a removable battery door.

• Size (L x W x H) 220 x 140 x 40mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599KBKBAT

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS grey plastic.

• Size (L x W x H) 220 x 140 x 40mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599KGY

This attractively styled and ergonomically designed hand-held instrument enclosure from the Hammond 1599 series is moulded from flame-retardant ABS grey plastic. This enclosure has a removable battery door.

• Size (L x W x H) 220 x 140 x 40mm (including lid)
• Recessed top for membrane display or pad
• Lap joint construction provides protection against dust accumulation and splashing water
• Extra deep top and ultra shallow base
• Designed to meet IP54
• Lid secured with Philips machine screws, threaded into tapped integral brass bushings
• Perfect for applications where repetitive assembly and disassembly is required
• Two keyhole knockouts moulded into the inside of the base to facilitate wall mounting
• Material carries UL flammability rating of 94V-0
• Manufacturer's part 1599KGYBAT

This attractively styled, grey ABS enclosure from Hammond is designed primarily for hand-held instruments. Lap joint construction provides protection against intrusion from dust and splashing water. Two keyhole knockouts are moulded into the inside of the base to facilitate wall mounting.

• Recessed top for membrane or pad display
• Extra deep top and ultra shallow base
• IP rating IP54
• Size (L x W x H) 220 x 140 x 40mm
• Manufacturer's part 1599KSGY

This attractively styled, grey ABS enclosure with battery compartment from Hammond is perfect for applications where repetitive assembly and disassembly is required. Lap joint construction provides protection against intrusion from dust and splashing water. Moulded from flame retardant ABS plastic with a UL Flammability Rating of 94V-0. Lid is secured with Phillips screws threaded into tapped integral brass bushings.

• Recessed top for membrane or pad display
• Extra deep top and ultra shallow base
• IP rating IP54
• Size (L x W x H) 220 x 140 x 40mm
• Manufacturer's part 1599KSGYBAT

This hand held tablet-style enclosure from the Hammond 1599TABL Series is made from black flame retardant ABS plastic. The range also includes a version which has a battery compartment and door.

• Size 240 x 190 x 30mm
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50 mm)
• Enclosure is assembled with six M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Manufacturer's part no 1599TABLBK

This hand held tablet-style enclosure from the Hammond 1599TABL Series is made from black flame retardant ABS plastic and has a battery compartment and door.

• Size 240 x 190 x 30mm
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50 mm)
• Enclosure is assembled with six M3 0.5 x 18 mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Battery compartment version includes 8 battery clips for 4 x AA batteries and 2 x 9V PP3 clips
• Manufacturer's part no 1599TABLBKBAT

This hand held tablet-style enclosure from the Hammond 1599TABL Series is made from grey flame retardant ABS plastic. The range also includes a version which has a battery compartment and door.

• Size 240 x 190 x 30mm
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50 mm)
• Enclosure is assembled with six M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Manufacturer's part no 1599TABLGY

This hand held tablet-style enclosure from the Hammond 1599TABL Series is made from grey flame retardant ABS plastic and has a battery compartment and door.

• Size 240 x 190 x 30mm
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50 mm)
• Enclosure is assembled with six M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Battery compartment version includes 8 battery clips for 4 x AA batteries and 2 x 9V PP3 clips
• Manufacturer's part no 1599TABLGYBAT

This hand held tablet-style enclosure from the Hammond 1599TABL Series is made from black flame retardant ABS plastic. The range also includes a version which has a battery compartment and door.

• Size 170 x 135 x 27mm
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50 mm)
• Enclosure is assembled with six M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Manufacturer's part no 1599TABMBK

This hand held tablet-style enclosure from the Hammond 1599TABL Series is made from black flame retardant ABS plastic and has a battery compartment and door.

• Size 170 x 135 x 27mm
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50 mm)
• Enclosure is assembled with six M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Battery compartment version includes 8 battery clips for 4 x AA batteries and 2 x 9V PP3 clips
• Manufacturer's part no 1599TABMBKBAT

This hand held tablet-style enclosure from the Hammond 1599TABL Series is made from grey flame retardant ABS plastic. The range also includes a version which has a battery compartment and door.

• Size 170 x 135 x 27mm
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50 mm)
• Enclosure is assembled with six M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Manufacturer's part no 1599TABMGY

This hand held tablet-style enclosure from the Hammond 1599TABL Series is made from grey flame retardant ABS plastic and has a battery compartment and door.

• Size 170 x 135 x 27mm
• Ergonomically designed for a comfortable fit in the user's hand
• Perfect for instrument or mobile data enclosures requiring a touch screen
• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Has end panel which is removable for easy modification
• Lap joint construction provides protection against dust and water (designed to meet IP54)
• Bottom half of enclosure includes a moulded inlay for labels (50 x 50 mm)
• Enclosure is assembled with six M3 0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Ideal for applications when repetitive assembly and disassembly are required
• PC Board standoffs moulded into top and bottom of case
• Battery compartment version includes 8 battery clips for 4 x AA batteries and 2 x 9V PP3 clips
• Manufacturer's part no 1599TABMGYBAT

Watertight hand-held instrument enclosure 130 x 68 x 25mm moulded in light grey general purpose ABS plastic.

• Battery compartment is independently sealed making it waterproof. Will accept either 1x 9V or 2x AA battery cells
• The upper and lower halves are sealed to IP65
• Recessed area to accept membrane keypads, switches etc.
• Internal PCB mounting lugs are available for mounting PCBs in both the base and upper section
• Ideal in areas where protection from the environment is required
• Designed to meet IP65

Watertight hand-held instrument enclosure 160 x 85 x 30mm moulded in light grey general purpose ABS plastic.

• Battery compartment is independently sealed making it waterproof. Will accept either 1x 9V or 2x AA battery cells
• The upper and lower halves are sealed to IP65
• Recessed area to accept membrane keypads, switches etc.
• Internal PCB mounting lugs are available for mounting PCBs in both the base and upper section
• Ideal in areas where protection from the environment is required
• Designed to meet IP65

This ABS enclosure from the Hammond RL Series measures 104 x 65 x 40mm with a deep lid and is ideally suited for hand held or instrument case applications.

• Designed to house PC boards
• Moulded in light grey ABS plastic with a light texture (material carries a UL flammability rating of UL94 HB)
• Two part - snap action - clam shell construction. Both halves include smooth recessed area for membrane, label or silkscreen
• PC board standoffs are moulded into both halves of the enclosure
• Designed to meet IP54
• Includes four M3 assembly screws
• Manufacturer's part RL6015

This ABS enclosure from the Hammond RL Series measures 144 x 65 x 40mm with a deep lid and is ideally suited for hand held or instrument case applications.

• Designed to house PC boards
• Moulded in light grey ABS plastic with a light texture (material carries a UL flammability rating of UL94 HB)
• Two part - snap action - clam shell construction. Both halves include smooth recessed area for membrane, label or silkscreen
• PC board standoffs are moulded into both halves of the enclosure
• Designed to meet IP54
• Includes four M3 assembly screws
• Manufacturer's part RL6035