High-impact black ABS case measuring 96.2 x 61 x 25mm with an integral PP3 battery compartment and removable end plate. The clip-in terminals are supplied as standard. This medium sized hand held case also features a snap shut cover and flush top.

• Ergonomic design for maximum user comfort
• Suitable for remote control devices connected via a cable or powered by batteries
• Overall finish is matt black
• Manufacturer's part EVA-40-9V-FL-BLK

High-impact black ABS case measuring 91 x 31.8 x 146mm with an integral PP3 battery compartment and removable end plate. The clip-in terminals are supplied as standard. This medium sized hand held case also features a snap shut cover and flush top.

• Ergonomic design for maximum user comfort
• Suitable for remote control devices connected via a cable or powered by batteries
• Overall finish is matt black
• Manufacturer's part EVA-90-9V-RE

A hand-held case fitted with window to take a display.

• Hand-held LCD case
• ABS material
• Black colour
• 180mm length, 100mm width, 44mm height
• Battery compartment accepts either one or two PP3 9V batteries or 4x AA cells
• Battery compartment lid snap fits onto case
• Window area 65 x 23mm
• Evatron type LLCD011

This mobile enclosure from Evatron is part of a modular ABS enclosure system offering sealing to IP65, for hand-held equipment in heavy-duty portable applications.

• Colour: off-white
• Large recessed area suitable for membrane keyboards, displays or labels
• Battery compartment is available, to accommodate 4x AA cells
• Outer battery compartment cover is secured by 2 screws (supplied)
• Suitable battery contacts are available separately
• Rubberised holster simply clips around the enclosure, and features a tilt/carry/hang handle and a side access cover for connectors, etc.
• Outside dimensions of enclosure (without holster) 165 x 100 x 44mm

This 129 x 40 x 25mm black ABS box from the Evatron PC00 Series is ideal for use with probes, remote control units and small circuits, among other applications.

• Moulded in impact resistant ABS
• PCB mounting points
• Box halves held together with two screws, supplied
• Rounded corners

This 129 x 40 x 25mm white ABS box from the Evatron PC00 Series is ideal for use with probes, remote control units and small circuits, among other applications.

• Moulded in impact resistant ABS
• PCB mounting points
• Box halves held together with two screws, supplied
• Rounded corners

This 129 x 40 x 25mm black ABS box with battery compartment from the Evatron PC00 Series is ideal for use with probes, remote control units and small circuits, among other applications.

• Moulded in impact resistant ABS
• PCB mounting points
• Box halves held together with two screws, supplied
• Rounded corners
• Battery compartment designed to hold 1x PP3 battery

This 129 x 40 x 25mm white ABS box with battery compartment from the Evatron PC00 Series is ideal for use with probes, remote control units and small circuits, among other applications.

• Moulded in impact resistant ABS
• PCB mounting points
• Box halves held together with two screws, supplied
• Rounded corners
• Battery compartment designed to hold 1x PP3 battery

A small 78 x 37 x 21mm black ABS box from Evatron with rounded profile.

• Snap fit
• Comfortable shape for hand-held equipment
• Ideal for pocket-size equipment
• Matt textured finish
• Moulded-in bosses for PCB mounting

Cost-effective case from Evatron with built-in battery compartment with lift-off covers and contacts which can accept 2x AA batteries or a single PP3.

• Moulded-in bosses allow easy fitting of PCBs and other components
• The two case halves are held together by the screws supplied
• A 53 x 47.5mm recess is provided in the front case moulding for membrane keypads or labels or logos
• Ideal for speakers, buzzers and microphones, such as in door-entry and security systems
• Moulded in textured, black ABS
• Dimensions: 131 x 60 x 30mm

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black. Dimensions (mm) 75 x 50 x 17.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Grey. Dimensions (mm) 75 x 50 x 17.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black. Dimensions (mm) 100 x 61 x 17.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Grey. Dimensions (mm) 100 x 61 x 17.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black/grey. Dimensions (mm) 117 x 79 x 24.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black/grey. Dimensions (mm) 117 x 79 x 24. Battery compartment.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black. Dimensions (mm) 117 x 79 x 24.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black. Dimensions (mm) 117 x 79 x 24. Battery compartment.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Grey. Dimensions (mm) 117 x 79 x 24.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Grey. Dimensions (mm) 117 x 79 x 24. Battery compartment.

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Red colour, 117mm length, 79mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553BRDBK

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Red colour, 117mm length, 79mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553BRDBKBAT

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Translucent blue colour, 117mm length, 79mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553BTBUBK

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Translucent blue colour, 117mm length, 79mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553BTBUBKBAT

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Yellow colour, 117mm length, 79mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553BYLBK

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Yellow colour, 117mm length, 79mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553BYLBKBAT

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black. Dimensions (mm) 117 x 79 x 33.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black. Dimensions (mm) 117 x 79 x 33. Battery compartment.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Grey. Dimensions (mm) 117 x 79 x 33.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Grey. Dimensions (mm) 117 x 79 x 33. Battery compartment.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black/grey. Dimensions (mm) 147 x 89 x 25.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black/grey. Dimensions (mm) 147 x 89 x 25. Battery compartment.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black. Dimensions (mm) 147 x 89 x 25.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Black. Dimensions (mm) 147 x 89 x 25. Battery compartment.

Buy Hand-Held Enclosure (Soft-Sided) Grey 147 x 89 x 25mm from Hammond - designed for maximum ergonomic comfort and comes from the 1553 Series. The enclosures are over moulded with a soft grey or black edge grip for comfort.

Hammond 1553 Series. Soft sided Hand-held Enclosures designed for maximum ergonomic comfort. The enclosures are overmoulded with a soft grey or black edge grip for comfort. Colour Grey. Dimensions (mm) 147 x 89 x 25. Battery compartment.

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Red colour, 147mm length, 89mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553DRDBK

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Red colour, 147mm length, 89mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553DRDBKBAT

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Translucent blue colour, 147mm length, 89mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553DTBUBK

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Translucent blue colour, 147mm length, 89mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553DTBUBKBAT

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Yellow colour, 147mm length, 89mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553DYLBK

Soft side hand-held enclosure from the Hammond 1553 Series, moulded in general purpose ABS plastic with a black overmould, ergonomically designed for hand-held comfort.

Includes removable front panel (for easy modifications) and assembly hardware.

Yellow colour, 147mm length, 89mm width, 24mm height.

• Soft plastic grip
• Top cover recessed for membrane display or keypad
• PC board standoffs moulded into case
• UL-94HB flame resistance rating,
• Battery door and compartment version includes 4 battery clips (for 2 x AA batteries) and a 9V (PP3) battery clip
• Manufacturer's part 1553DYLBKBAT

Grey-coloured soft-sided multipurpose T case from Hammond's 1553T Series, perfect for mobile data enclosures which require a keypad and display. Both the display and keyboard areas are recessed for membrane keypads. The cases are ergonomically designed to fit comfortably into the user's hand.

• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Handheld section of enclosure includes overmould, soft plastic grip
• Enclosure assembled with M3-0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Perfect for applications when repetitive assembly and disassembly are required
• Lap joint construction provides protection against ingress of dust and splashing water
• Designed to meet IP54
• PC board standoffs are moulded into case
• Bottom half of enclosure includes moulded-in label recess on back
• Manufacturer's part 1553TBK

Grey-coloured soft-sided multipurpose T case from Hammond's 1553T Series, perfect for mobile data enclosures which require a keypad and display. Both the display and keyboard areas are recessed for membrane keypads. The cases are ergonomically designed to fit comfortably into the user's hand.

• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Handheld section of enclosure includes overmould, soft plastic grip
• Enclosure assembled with M3-0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Perfect for applications when repetitive assembly and disassembly are required
• Lap joint construction provides protection against ingress of dust and splashing water
• Designed to meet IP54
• PC board standoffs are moulded into case
• Battery compartment versions include clips for AA or PP3 (9V) batteries
• Bottom half of enclosure includes moulded-in label recess on back
• Manufacturer's part 1553TBKBAT

Grey-coloured soft-sided multipurpose T case from Hammond's 1553T Series, perfect for mobile data enclosures which require a keypad and display. Both the display and keyboard areas are recessed for membrane keypads. The cases are ergonomically designed to fit comfortably into the user's hand.

• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Handheld section of enclosure includes overmould, soft plastic grip
• Enclosure assembled with M3-0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Perfect for applications when repetitive assembly and disassembly are required
• Lap joint construction provides protection against ingress of dust and splashing water
• Designed to meet IP54
• PC board standoffs are moulded into case
• Bottom half of enclosure includes moulded-in label recess on back
• Manufacturer's part 1553TGY

Grey-coloured soft-sided multipurpose T case from Hammond's 1553T Series, perfect for mobile data enclosures which require a keypad and display. Both the display and keyboard areas are recessed for membrane keypads. The cases are ergonomically designed to fit comfortably into the user's hand.

• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Handheld section of enclosure includes overmould, soft plastic grip
• Enclosure assembled with M3-0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Perfect for applications when repetitive assembly and disassembly are required
• Lap joint construction provides protection against ingress of dust and splashing water
• Designed to meet IP54
• PC board standoffs are moulded into case
• Battery compartment versions include clips for AA or PP3 (9V) batteries
• Bottom half of enclosure includes moulded-in label recess on back
• Manufacturer's part 1553TGYBAT

Grey-coloured soft-sided multipurpose T case from Hammond's 1553T Series, perfect for mobile data enclosures which require a keypad and display. Both the display and keyboard areas are recessed for membrane keypads. The cases are ergonomically designed to fit comfortably into the user's hand.

• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Handheld section of enclosure includes overmould, soft plastic grip
• Enclosure assembled with M3-0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Perfect for applications when repetitive assembly and disassembly are required
• Lap joint construction provides protection against ingress of dust and splashing water
• Designed to meet IP54
• PC board standoffs are moulded into case
• Bottom half of enclosure includes moulded-in label recess on back
• Manufacturer's part 1553TTBK

Grey-coloured soft-sided multipurpose T case from Hammond's 1553T Series, perfect for mobile data enclosures which require a keypad and display. Both the display and keyboard areas are recessed for membrane keypads. The cases are ergonomically designed to fit comfortably into the user's hand.

• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Handheld section of enclosure includes overmould, soft plastic grip
• Enclosure assembled with M3-0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Perfect for applications when repetitive assembly and disassembly are required
• Lap joint construction provides protection against ingress of dust and splashing water
• Designed to meet IP54
• PC board standoffs are moulded into case
• Battery compartment versions include clips for AA or PP3 (9V) batteries
• Bottom half of enclosure includes moulded-in label recess on back
• Manufacturer's part 1553TTBKBAT

Grey-coloured soft-sided multipurpose T case from Hammond's 1553T Series, perfect for mobile data enclosures which require a keypad and display. Both the display and keyboard areas are recessed for membrane keypads. The cases are ergonomically designed to fit comfortably into the user's hand.

• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Handheld section of enclosure includes overmould, soft plastic grip
• Enclosure assembled with M3-0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Perfect for applications when repetitive assembly and disassembly are required
• Lap joint construction provides protection against ingress of dust and splashing water
• Designed to meet IP54
• PC board standoffs are moulded into case
• Bottom half of enclosure includes moulded-in label recess on back
• Manufacturer's part 1553TTGY

Grey-coloured soft-sided multipurpose T case from Hammond's 1553T Series, perfect for mobile data enclosures which require a keypad and display. Both the display and keyboard areas are recessed for membrane keypads. The cases are ergonomically designed to fit comfortably into the user's hand.

• Moulded from flame retardant ABS plastic with a UL flammability rating of 94V-0
• Handheld section of enclosure includes overmould, soft plastic grip
• Enclosure assembled with M3-0.5 x 18mm Phillips machine screws, threaded into integral brass bushings
• Perfect for applications when repetitive assembly and disassembly are required
• Lap joint construction provides protection against ingress of dust and splashing water
• Designed to meet IP54
• PC board standoffs are moulded into case
• Battery compartment versions include clips for AA or PP3 (9V) batteries
• Bottom half of enclosure includes moulded-in label recess on back
• Manufacturer's part 1553TTGYBAT