The Conrad CMFR-66 is a DIN Rail Multi-functional Timer Relay with 6 time functions and 6 time ranges. This versatile timer is ideal for many applications.

The timer has 6 time functions: On-delay, Interval, Symmetrical flasher, Off-delay with control signal, On- and off-delay with control signal, Interval with control signal on.

• 6 time ranges: 0.1 - 2 secs, 1 - 20 secs, 0.1 - 2 mins, 1 - 20 mins, 0.1 - 2 hrs, 1 -24 hrs
• 12 to 240V DC/AC multi-voltage input
• Manufacturer's part: Conrad CMFR-66

The EMAS PTM110 Thermostat is a DIN rail mounted thermostat for control panel heating applications.

Normally closed contact opens at setpoint, breaking the heating circuit when correct internal temperature has been reached.

• Product: Thermostat
• Feature: Single
• Contact: 1NC
• Colour: Red
• Current: (Ie) - 10 A (230V AC)
• Usage Category: AC15
• Mechanical Life (Min Qty): 50000
• Electrical Life (Min Qty: 50000
• Operating Frequency (On-Off/Hour): Mech. 900 Elec. 900
• Insulation Voltage (Ui): 300V
• Impulse Withstand Voltage (Uimp): 2.5 kV
• Dielectric Strength (Body-Contact): 2.500V AC
• Dielectric Strength (Contact-Contact): 1.500V AC
• Isolation Resistance: 10 MΩ min. (500V DC)
• Operating Temperature: -25 / +80 °C
• Pollution Degree: 3
• Protection Degree: IP20
• Contact Material: AgNi
• Cable Section: 1-2.5 mm²
• Screw Torque: ,5 Nm
• Short Circuit Breaking Capacity (Ics): 1 kA
• Serial: PTM Series

The EMAS Klemensli Timer is a simple, flush mounted timer which fits a standard cutout. It outputs a PNP signal after delay period has elapsed. Illumination - Red/Green LED indicator.

• Analogue control
• Time range 0.1-30 seconds
• Compact design
• Fast and silent switching
• Long life
• Fingerproof design

The EMAS Klemensli Timer is a simple, flush mounted timer. It outputs a PNP signal after delay period has elapsed. Illumination - Red/Green LED indicator.

• Analogue control
• Time range 0.1-60 seconds
• Compact design
• Fast and silent switching
• Long life
• Fingerproof design

This panel mounting PID temperature controller has a Pt100 type input. Outputs are of the C/A2 relay or SSR types and the controller features selectable dual-set value and programmable relay outputs. Parameter setting is via front panel keys and the display is a 4-digit, 12mm character height red LED.

• Outputs for soft start or self-tuning functions
• Programmable alarm or control output
• Selectable SSR output
• Three level parameter access protection
• Selectable heat/cool control
• Input offset feature
• Can be flush mounted
• Screw terminal connection

This panel mounting PID temperature controller has a thermocouple type input. Outputs are of the C/A2 relay or SSR types and the controller features selectable dual-set value and programmable relay outputs. Parameter setting is via front panel keys and the display is a 4-digit, 12mm character height red LED.

• Outputs for soft start or self-tuning functions
• Programmable alarm or control output
• Selectable SSR output
• Three level parameter access protection
• Selectable heat/cool control
• Input offset feature
• Can be flush mounted
• Screw terminal connection

A 48 x 48 x 87mm panel mounting PID temperature controller with a choice of selectable control outputs including relay, alarm and SSR. There are inputs for a range of Pt100 temperature sensor types and the unit has 2x 4-digit LED displays, with parameter control set via front panel keys.

• Outputs for soft start or self-tuning functions
• Selectable SSR or relay control output
• Alarm output
• Three level parameter access protection
• Programmable relay output
• Selectable heat/cool control
• Input offset feature
• Can be flush mounted
• Screw terminal connection

An analog Pt100 temperature controller with a linear output that is designed for DIN rail mounting. Temperature range is 0°C to +200°C and the unit has a 0 to +10V output.

• High accuracy
• DIN Rail mounting
• Reverse polarity protection
• 2 or 3-wire Pt100 connection
• Screw terminals

This multifunction timer has a 12 to 240V AC/DC input and a SPDT 16A output. Easy to set dials give 0.1s to 100 hours time range. 10 functions include a volt-free start contact for remote control.

• Process timer
• 10x Timing functions
• 8x Time ranges
• DIN rail mounting
• EN 61812

The Daily Time Switch (Finder 12.11.8.230.0000) is rated at 230VAC, 16A. This 1 NO (SPST-NO) is 17.6mm wide. The timeswitch has a quartz-controlled motor drive. This is for mounting on 35mm DIN rail. Approvals: CE, GOST. Applications: Ideal for in-house distribution cabinets.

• Mechanical daily time switch
• 1 NO (SPST-NO)
• 35mm rail (EN 60715) mount
• 15 minute minimum interval
• Contact load capacity: (at 230V): Glow lamps 2000W, compensated fluorescent lamps 750W, uncompensated fluorescent lamps 1000W, halogen lamps 2000W
• Dimensions: 90(L) x 17,6(W)mm
• Operating voltage: 230V AC
• Product Specifications: Shortest switching interval: 15 minutes
• Power reserve 70 hours
• Protection type: IP20
• Specification: Daytime program
• Switching capacity: (AC1) 16 A/250V AC
• Switching current: 16A
• Switching voltage: 250V AC
• Manufacturer's part: Finder 12/11/08.230.0000

The Finder 80.01.0.240.0000 is a Time Delay Relay from the 80 Series. This Multi-voltage/ Multi-function modular timer is 17.5mm width and 35mm DIN rail mountable. It has six time scales from 0.1 second to 24 hour. This flexibility of operation means that specification is simplified and inventory levels can be kept to a minimum.

This multi-function timer has On-delay (AI) , Interval (DI), Symmetrical flasher (SW (starting pulse on)), Off-delay with control signal (BE), On- and off-delay with control signal (CE) and Interval with control signal on (DE). The contact configuration is 1 CO (SPDT). Rated at 1A and with a flexible voltage range of 24 to 240V AC means that specification is simplified and inventory levels can be kept to a minimum

Both flat blade and cross head screw drivers can be used to adjust the function selector, the timing trimmer, and to disengage the 35mm rail mounting clip.

• Monofunction, multivoltage
• 17.5mm wide
• Six time scales from 0.1s to 24h
• 35mm DIN rail (EN 60715) mount
• Contact material: AgCdO
• Contact type: 1 CO (SPDT)
• Dimensions: 60.8(H) x 17.5(W)mm
• Operating voltage: 14 - 240V DC/AC
• Protection type: IP20
• Specification: Timer delay relay switch
• Switching current: 16/30A
• Switching voltage: 250/400V AC
• Temperature range: -10°C to +50°C
• Time range(s): 6 time domains upto 20 hrs
• Manufacturer's part: Finder 80.01.0.240.0000

The Finder 80.41.0.240.0000 Multi Voltage / Mono Function Timer is from the 80 Series. This high input/ output isolation modular timer is 17.5mm width and 35mm DIN rail mountable. It has six time scales from 0.1 second to 24 hour. This flexibility of operation means that specification is simplified and inventory levels can be kept to a minimum.

The Off Delay with Control Signal (BE) timer has a contact configuration of 1 CO (SPDT). Rated at 16/30A and with a flexible voltage range of 24 to 240V AC means that specification is simplified and inventory levels can be kept to a minimum.

Both flat blade and cross head screw drivers can be used to adjust the function selector, the timing trimmer, and to disengage the 35mm rail mounting clip.

• Monofunction, multivoltage
• 17.5mm wide
• Six time scales from 0.1s to 24h
• High input/output isolation
• 35mm DIN rail (EN 60715) mount
• Contact material: AgCdO
• Contact type: SPDT-CO
• Dimensions: 60.8(H) x 17.5(W)mm
• Operating voltage: 24 - 240V DC/AC
• Product Specifications: Pulse duration: (if control via B1) 50ms
• Recovery duration: 50ms
• Protection type: IP20
• Specification: Time relay drop-out delay
• Switching capacity: (AC1) Max 4000VA, at 16 A contact AC 15 (230V/ AC) 750VA, motor load at 16A contact (1-phase motor AC-3 operation - 230V/ AC) 0.55kW
• Switching current: 16A
• Switching voltage: 400V AC
• Temperature range: -10°C to +50°C
• Time range(s): 6 time ranges up to 20 hrs
• Timer functions: Drop-out delay
• Manufacturer's part: Finder 80.41.0.240.0000

The Finder 240V Plug-In timer (miniature) coil is a miniature 4-pole, 7A, multifunction, plug-in timer relay manufactured to a high standard.

• Timer range from 0.05s to 100hrs
• Available with either 12V, 24V or 240V coils
• Multifunction options include ON delay, ON pulse, symmetrical recycler (ON start) and fixed pulse delayed

The Finder Plug-In Base 85 Series (Type 94.74) is from an industry standard range of miniature 4-pole changeover relays.

• Manual test button
• Mechanical flag indication
• DIN rail/surface socket has touchproof terminals
• Accepts all modules and a user defined legendable identification tab
• Relays approved to IMQ, SEMKO, CSA (4.5A), DEMKO, VDE, SEV and UL
• Sockets approved to CSA and UL
• Finder 55-34 series

The Muller BW 4017 DC Operating Hours Counter is suitable for installation in control panels and uses a 12-48V DC power supply. The digits on the front panel are large and easy to read. The counter is easy to install and quick to mount using the spring clip and the finger-safe connections in line with VBG4.

• Front panel installation 48 x 48mm
• Low-noise
• Quick mounting with spring clip
• Quartz stabilised
• Assembly dimensions: 45 x 45 mm
• Connections: Universal connector: Screw, solder and AMP connector 6.3 x 0.8mm
• Counter range: 999999.9
• Digit height: 4.4mm
• Display: Counter rolls
• No. of digits: 7-digit
• Operating voltage: 12 - 48V DC
• Product Specifications: Permissible ambient temperature: -10°C to +50VC
• Voltage tolerance: ±10%
• Protection type: IP50
• Specification: Panel mount
• Manufacturer's part:: Muller BG4017

The Muller BW4018 is a reliable 230V AC Operating Hours Counter that records operating times in electrical systems, machines, heaters etc. The counter is easy to install using the quick fix retaining clip and the easy to connect screw terminals are accessible from the rear. Mounting in the panel requires an aperture of 45 x 45mm. The large 4.4mm white digits and red decimals are clear and easy to read.

• Front panel installation 48 x 48 mm
• Low-noise
• Quick mounting with spring clip
• Assembly dimensions 45 x 45 mm
• Connections: Universal connector: Screw, solder and AMP connector 6.3 x 0.8 mm
• Counter range: 99999.99
• Digit height: 4.4 mm
• Dimensions, height: 48 mm
• Dimensions, width: 48 mm
• Display: Counter rolls
• No. of digits: 7-digit
• Operating voltage: 230 V/50 Hz
• Product Specifications: Permissible ambient temperature: -10 to +50 °C
• Voltage tolerance: ±15 %
• Protection type: IP50
• Specification: Panel mount
• Manufacturer's part:: Muller BW4018

The Muller BW 7018 Operating Hours Counter is suitable for installation in DIN Rail and uses a 230V DC power supply. The 5-digit, 7-segment counter on the front panel is easy to read. The counter is easy to install and has screw terminals and touch proof connections. The slim-fit flush mount counter measures 85 x 17.5mm.

• Installation dimensions 45 x 17.5mm
• Slim design
• Screw terminals
• Colour: Black
• Connections: Screw terminals
• Counter range: 99999.99
• Digit height: 2.6 mm
• Dimensions, height: 85mm
• Dimensions, width: 17.5mm
• Display: Counter rolls
• No. of digits: 7-digit
• Operating voltage: 230V AC/50Hz
• Product Specifications: Permissible ambient temperature: -15°C to +50°C
• Voltage tolerance: ±15%
• Protection type: IP50
• Manufacturer's part:: Muller BW7018

The Muller BG 7029 Operating Hours Counter is suitable for installation in DIN Rail and uses a 230V DC power supply. The 4.4mm numeral height 5-digit, 6-segment counter on the front panel is easy to read. The counter is easy to install and has screw terminals and touch proof connections. The slim-fit flush mount counter measures 90 x 35mm.

• Installation dimensions 45 x 35mm
• Screw terminals
• Colour: Black
• Connections: Screw terminals
• Counter range: 99999.9
• Digit height: 4.4 mm
• Dimensions, height: 90mm
• Dimensions, width: 35mm
• Display: Counter rolls
• No. of digits: 6-digit
• Operating voltage: 230V AC/50Hz
• Product Specifications: Permissible ambient temperature: -15°C to +50°C
• Voltage tolerance: ±15%
• Protection type: IP50
• Manufacturer's part:: Muller BW7029

The Muller SC2410PRO is a Panel Mount 1-Channel Digital Timer with 40 program memory storage. The timer has been designed to be panel mounted, requiring a 48 x 48mm cut-out.

The high resolution LCD screen is clear and easy to read. The switching functions are On/Off, holiday and pulse (pulse duration 0.1 seconds to 59.59 minutes), permanent and manual override activation. The MR10.28PRO can be programmed with supply disconnected for up to six years on the reserve battery power.

• 1 channel
• Daily and weekly program
• 46 memory locations
• Minimum interval 1 minute
• Switching capacity 8A
• Permanent by date / holiday function
• Manual permanent mode (channel key)
• Manual override
• Automatic sorting of switching times
• Unrestricted block programming
• Fully automatic daylight saving time
• Elapsed time and pulse counter
• Pulse function
• External input (manual override)
• Security by PIN-code
• Text based menu and self-explanatory symbols
• Display with two text lines
• Easy handling
• Quick and intuitive programmable time switch
• Can be programmed with supply disconnected (6 years battery-reserve)
• Manufacturer's part: Muller SC24.10PRO

This Muller SC2811PRO is a DIN Rail Timer that has a text-based menu navigation and self-explanatory symbols. The large and clear display with two high-resolution text lines is easy to use for fast and intuitive programming. This timer can be programmed without mains connection up to 6 years on its own power reserve.

The timer can be set for both daily and weekly programs. Other settings include permanent switching, duration of switch Off or switch On via manual switch, manual switching pre-emption, automatic sorting of switching times when reading and free block programming of weekdays.

• DIN rail mount timer
• Astro function: No
• Cycle: No
• Data key: Yes (optional)
• Dimensions: 90(H) x 63(L) x 35.8(W)mm
• Display backlighting: No
• External input: No
• Impulse: Yes
• Memory slots: 46
• Min. power reserve: 10 years
• Operating voltage (num.): 12V DC
• Product Specifications: Quartz accuracy (at 20°C): ± 1s / day
• Display: High resolution display (field of view : 7.5cm²)
• Ambient temperature: -10°C to +55°C
• Switching channels: 1 x UM
• Time switch type: digital
• Manufacturer's part: Muller SC 28.11 pro

This Muller SC2813PRO is a DIN Rail Timer that has a text-based menu navigation and self-explanatory symbols. The large and clear display with two high-resolution text lines is easy to use for fast and intuitive programming. This timer can be programmed without mains connection up to 6 years on its own power reserve.

The timer can be set for both daily and weekly programs. Other settings include permanent switching, duration of switch Off or switch On via manual switch, manual switching pre-emption, automatic sorting of switching times when reading and free block programming of weekdays.

• DIN rail mount timer
• Astro function: Yes
• Cycle: No
• Data key: No
• Dimensions: 90(H) x 63(L) x 35.8(W)mm
• Display backlighting: No
• External input: No
• Impulse: No
• Memory slots: 60
• Min. power reserve: 10 years
• Operating voltage (num.): 230V AC
• Product Specifications: Quartz accuracy (at 20°C): ±1 s / day
• Display: High resolution display (field of view : 7.5cm²)
• Ambient temperature: -10°C - +55°C
• Switching channels: 1 x UM
• Time switch type: digital
• Manufacturer's part: Muller SC 28.13 pro

This Muller SC2823PRO is a DIN Rail Timer that has a text-based menu navigation and self-explanatory symbols. The large and clear display with two high-resolution text lines is easy to use for fast and intuitive programming. This timer can be programmed without mains connection up to 6 years on its own power reserve.

The timer can be set for both daily and weekly programs. Other settings include permanent switching, duration of switch Off or switch On via manual switch, manual switching pre-emption, automatic sorting of switching times when reading and free block programming of weekdays.

• DIN rail mount timer
• Astro function: Yes
• Cycle: No
• Data key: No
• Dimensions: 90(H) x 63(L) x 35.8(W)mm
• Display backlighting: No
• External input: No
• Impulse: No
• Memory slots: 60
• Min. power reserve: 10 years
• Operating voltage (num.): 230V AC
• Product Specifications: Quartz accuracy (at 20°C): ± 1 s / day
• Display: High resolution display (field of view : 7.5cm²)
• Ambient temperature: -10°C to +55°C
• Switching channels: 2 x change-over
• Time switch type: digital
• Manufacturer's part: Muller SC 28.23 pro

This Muller Digital-Timer TC 14.21 is a universal countdown timer with switching output for panel mounting. It is supplied with a tensioning bracket for a 46 x 46 mm cut-out. The adjustable timing range is a minimum 1.0 second to maximum of 9 hours 59 min 59 seconds. An optical and audible signal notifies the user on completion of set time. The output (1x changeover) is active during the timing cycle.

There are three buttons below the clear display for Start/Stop, Reset and Prog (Program). Connection is by pluggable screw terminals on the rear.

• Countdown timer
• 1x change-over relay
• Max. time TC 14.21: 09:59:59 hh:mm:ss
• Repeatability accuracy 100%
• Time set accuracy 1 second
• Output rating 8A/230V AC
• Inputs for start and stop (230V AC)
• Start stop button
• Optical and acoustic signal on completion of time
• Easy to program and operate
• Special functions/ models on request
• Time switch type: digital
• Dimensions: 41(L) x 48(H) x 48(W)mm
• Manufacturer's part: Müller Digital-Timer TC 14.21

The Muller VS 30.18 is a DIN Rail Mount Analogue Timer with a 24 hour program. The Electromechanical timer is easy to program, and the switching sequence is easy to read. The timer can be read to the exact second. Settings can be set to Automatic, continuous ON and continuous OFF.

• Switching channels: 1 x UM
• Time switch type: analogue
• Power rating: 250V 16A
• Shortest switching distance: 30 minutes
• Distributor installation: 35mm of profile rail (DIN EN 50022)
• Connection type: Screw terminal
• Protection type: IP 20 according to DIN EN 60529
• Accuracy = 1.5 sec/d
• Dimensions: 105(H) x 52.5(W)
• Manufacturer's part: Muller VS 30.18

The Trumeter 7954 is a multi-function digital time relay, offering 8 operating modes which can be easily configured on the 3 digit LCD display. The 7954 features a wide timing range of 0.1 second to 999 hours to suit all applications with a clear indication of the changeover relay status via the front panel LCD.

The 7954 comes in a compact 17.5mm DIN-Rail mountable case and can accept a wide range of operating voltages for most installations. In addition, the 7954 is tamper-proof due to the key lock feature, meaning 100% reliable operation.

Features:

• Compact 17.5mm DIN rail mountable
• 3 digit LCD for easy programming
• Tamper proof with key lock feature
• Wide timing range: 0.1 seconds to 999 hour
• Multi-function: 8 non-signal and signal based functions
• Multi-voltage: 24 to 240VAC/VDC
• Option to select up/down counting
• CE, UL and cUL approved

Operating Modes:

• ON Delay
• Cyclic OFF/ON
• Cyclic ON/OFF
• Signal ON/OFF
• Signal OFF Delay
• Interval
• Signal OFF/ON

The Trumeter 7957 is a multi-function digital time relay, offering 18 operating modes which can be easily configured on the 3 digit LCD display. The 7957 features a wide timing range of 0.1 second to 999 hours to suit all applications with a clear indication of the changeover relay status via the front panel LCD.

The 7957 comes in a compact 17.5mm DIN-Rail mountable case and can accept a wide range of operating voltages for most installations. In addition, the 7957 is tamper-proof due to the key lock feature, meaning 100% reliable operation.

Features:

• Compact 17.5mm DIN rail mountable
• 3 digit LCD for easy programming
• Tamper proof with key lock feature
• Wide timing range: 0.1 seconds to 999 hours
• Multi-function: 18 non-signal and signal based functions
• Multi-voltage: 24 to 240VAC/VDC
• Option to select up/down counting
• CE, UL and cUL approved

Operating Modes:

• ON Delay
• Cyclic OFF/ON
• Cyclic ON/OFF
• Impulse on Energizing
• Accumulative Delay on Signal
• Accumulative Delay on Inverted Signal
• Accumulative Impulse on Signal

The Voltcraft DHHM 230 operating hours timer is designed to DIN dimensions with an added countdown timer feature for installation in power supplies, lab equipment and control panels. It fits into a standard module with DIN dimensions 48 by 24mm and and the 6 display digits are 10mm high. The unit can be configured with an alarm set to trigger an optional LED or buzzer upon reaching a pre-set value. Alternatively it can be set-up as a count down timer and the alarm will trigger when the time reaches zero. Instructions are included with the device to connect four optional keys to aid its programming and operation.

• Counter range: 99999.9 hrs
• Height x width 45 x 22mm
• Temperature range from -10 °C to +50 °C.
• Requires a 3VDC supply @ 50µA

This thermostat can be used with a cooling function (ETC-100+). Suitable for all kinds of high temperature cold storage, direct-cooling cabinet and high temperature refrigerating equipment.

• Temperature upper and lower limit setting
• Supplied with temperature controller, temperature sensor, operating instructions
• Dimensions: 75(W) x 34.5(H) x 88(D)mm
• Measurement temperature (range) -40°C up to +120°C
• Protection type IP54 (front)
• Type (manufacturer type) ETC-100+

This thermostat can be used with a cooling or heating function (ETC-200+). Suitable for all kinds of high temperature cold storage, direct-cooling cabinet and high temperature refrigerating equipment.

• Temperature upper and lower limit setting
• Supplied with temperature controller, temperature sensor, operating instructions
• Dimensions (W x H x D) 7(W) x 34.5(H) x 88(D)mm
• Measurement temperature (range) -40°C up to +120°C
• Protection type IP54 (front)
• Type (manufacturer type) ETC-200+