A two-component polyurethane potting compound that is totally transparent to normal light and forms an excellent water-resistant barrier around encapsulated components. Specially designed divided cartridges and syringes, with disposable mixing nozzles, provide freshly mixed, accurately placed compound.
Each 250ml cartridge (1x 87-7172) has 2 compartments inside that keep the resin and hardener separated. When the cartridge is compressed in a caulking gun, both resin and hardener are emitted in the correct proportion. Inside the mixing nozzle (87-7174) is a matrix of tubes that mix the resin with the hardener as it progresses, exiting the nozzle completely mixed.
One 250ml cartridge produces 250ml of mixed resin and hardener, ready for use. If not all the 250ml is used at once, a new mixing nozzle (87-7174, available separately) will be required.
Mixing nozzle ensures correct quantities and uniform mixing
Replaceable nozzle allows multiple uses of the cartridge, reducing waste
Twin 250ml cartridge fits standard caulking guns
ALH Systems type NP1480
Supplied in a twin 250ml cartridge
Please note that no nozzles are included with the cartridge.
A two-component polyurethane potting compound that is totally transparent to normal light and forms an excellent water-resistant barrier around encapsulated components.
This specially designed twin 50ml syringe and mixing nozzle (supplied separately) provides freshly mixed, accurately placed compound.
Mixing nozzle ensures correct quantities and uniform mixing
Replaceable nozzle allows multiple uses of the syringe, reducing waste
Electrolube ER2188 is a UL approved, general purpose, two-part potting and encapsulating compound. The system utilises a hardener free from DDM and other aromatic amines. The flame retardant technology used is of a 'clean' type leading to relatively low toxicity fumes and low smoke emission.
Electrolube ER2218 is a low viscosity, flame retardant, two part potting and encapsulating compound. It has been specifically designed for compatibility with reflow applications, remaining stable during short periods of high temperature.
Exceptionally low viscosity
Ideal for applications with complex shapes or limited space
Combines flame retardancy with ease of application
Excellent thermal stability
Can withstand short term excursions at high temperatures
This product has been formulated to give a semi-rigid, flame retardant casting resin for use in potting or cable jointing applications. Polyurethane resins are softer and more flexible than epoxies and therefore cause less stress on delicate components.
Has good water and impact resistance and excellent adhesion to a wide variety of substrates
Supplied in a divided pack containing separate sections of hardener and resin in the correct proportions. To mix, the central clip is removed and the two sections mixed in the bag before opening
Electrolube UR5604 is a two-part, high performance polyurethane resin especially formulated for potting and encapsulating. It is also ideal as a general purpose UL approved resin.
General purpose polyurethane resin
Ideal for a wide variety of challenging environments
High level of flame retardancy
Low mixed viscosity ensures quick and efficient potting
Excellent adhesion to a wide variety of substrates
UL approved to UL94 V-0
Supplied in a 250g pack containing resin and hardener
Prysmian Weatherproof Plastic Compound prevents electrical leakage or short circuits due to dampness.
It prevents corrosion of electrical contacts in industrial atmospheres and seals irregular openings, cable entries, screw threads and covers of electrical equipment. The compound can be also used for many non-electrical applications whenever a reliable non-hardening moisture or water seal is required.
Prysmian Weatherproof Plastic Compound is soft enough to be readily moulded around terminals or intricate contours or pressed into cavities. The compound is highly resistant to water permeation, acids and alkalis in liquid or vapour form under normal conditions. It has no deleterious effect on metals and plastics or on natural rubber, synthetic rubber, PVC or other cable materials. It is ideal for sealing cable ends and cable entries to enclosures.
Prevents ingress of moisture
Non-hardening
Protects exposed terminals against corrosion
Easily applied to intricate contours
Good adhesion to metal, plastic, wood, rubber, PVC, etc.
Suitable for temperatures between -20°C and +80°C
Vibration resistant
Long shelf life when stored in original packaging (under normal conditions)
The Raytech Magic Gel utilises the latest in insulating technology. The unique cross linking polymer sets in just under 10 minutes creating huge labour saving advantages. The product also benefits from a zero shelf life providing less waste to the customer and can be used according to the amount required. Other advantages also include: completely non toxic, unlike conventional potting materials, can be accidentally ingested with complete safety. No need for protective gloves. Can be used safely in unventilated and confined areas. Waste packaging can be disposed of in a normal manner; when mixed, the gel has more fluid characteristics than resin for example, enabling it to pour more easily and successfully reach confined areas within an enclosure, there is also no exothermic reaction during mixing. The gel can be partially removed if necessary to change a configuration, then resealed by 'topping up' the gel, the gel has a high resistance to shock because of its flexibility, and increases resistance to water ingress as submersion depth increases. The cross linking process will complete even in sub zero conditions and is fully RoHS and WEEE directive compliant.
Magic Gel utilises the latest in insulating technology. The unique cross linking polymer sets in just under 10 minutes creating huge labour saving advantages. The product also benefits from a zero shelf life providing less waste to the customer and can be used according to the amount required. Other advantages also include: completely non toxic, unlike conventional potting materials, can be accidentally ingested with complete safety. No need for protective gloves. Can be used safely in unventilated and confined areas. Waste packaging can be disposed of in a normal manner; when mixed, the gel has more fluid characteristics than resin for example, enabling it to pour more easily and successfully reach confined areas within an enclosure, there is also no exothermic reaction during mixing. The gel can be partially removed if necessary to change a configuration, then resealed by 'topping up' the gel, the gel has a high resistance to shock because of its flexibility, and increases resistance to water ingress as submersion depth increases. The cross linking process will complete even in sub zero conditions and is fully RoHS and WEE directive compliant.
The Raytech Magic Gel 2 x 500ml Bottles utilises the latest in insulating technology. The unique cross linking polymer sets in just under 10 minutes creating huge labour saving advantages. The product also benefits from a zero shelf life providing less waste to the customer and can be used according to the amount required. Other advantages also include: completely non toxic, unlike conventional potting materials, can be accidentally ingested with complete safety. No need for protective gloves. Can be used safely in unventilated and confined areas. Waste packaging can be disposed of in a normal manner; when mixed, the gel has more fluid characteristics than resin for example, enabling it to pour more easily and successfully reach confined areas within an enclosure, there is also no exothermic reaction during mixing. The gel can be partially removed if necessary to change a configuration, then resealed by 'topping up' the gel, the gel has a high resistance to shock because of its flexibility, and increases resistance to water ingress as submersion depth increases. The cross linking process will complete even in sub zero conditions and is fully RoHS and WEE directive compliant.
Magic Gel utilises the latest in insulating technology. The unique cross linking polymer sets in just under 10 minutes creating huge labour saving advantages. The product also benefits from a zero shelf life providing less waste to the customer and can be used according to the amount required. Other advantages also include: completely non toxic, unlike conventional potting materials, can be accidentally ingested with complete safety. No need for protective gloves. Can be used safely in unventilated and confined areas. Waste packaging can be disposed of in a normal manner; when mixed, the gel has more fluid characteristics than resin for example, enabling it to pour more easily and successfully reach confined areas within an enclosure, there is also no exothermic reaction during mixing. The gel can be partially removed if necessary to change a configuration, then resealed by 'topping up' the gel, the gel has a high resistance to shock because of its flexibility, and increases resistance to water ingress as submersion depth increases. The cross linking process will complete even in sub zero conditions and is fully RoHS and WEE directive compliant.
The Raytech Magic Gel 2 x 150ml Bottles utilises the latest in insulating technology. The unique cross linking polymer sets in just under 10 minutes creating huge labour-saving advantages. The product also benefits from a zero shelf life, providing less waste to the customer and can be used according to the amount required. Other advantages include: completely non toxic, unlike conventional potting materials, and can be accidentally ingested with complete safety. No need for protective gloves. Can be used safely in unventilated and confined areas.
When mixed, the gel has more fluid characteristics than resin, for example, enabling it to pour more easily and successfully reach confined areas within an enclosure. There is no exothermic reaction during mixing. The gel can be partially removed if necessary to change a configuration, then resealed by 'topping up' the gel, which has a high resistance to shock because of its flexibility, and increases resistance to water ingress as submersion depth increases.
The cross linking process will complete even in sub zero conditions and is fully RoHS and WEE directive compliant.
Raytech's Ray RTV rubber potting compound has the advantage of being non-toxic, so can be used safely in unventilated areas, and has a zero shelf life, meaning it can be used according to the amount required for each job, reducing wastage.
Reacting quickly at room temperature, the two components transform into a rubber with high mechanical, thermal and elastic characteristics. It sets in less than eight minutes and is fully re-enterable.
Manufacturer's part Ray-RTV 1000-N
Applications include glass sealing, pit sealing, rubber gaskets, anti-corrosion protection and moulds for models and industry
Raytech's Techno Gel Gum is a polymeric potting compound ideal for insulating and sealing. In suitable applications it gives a degree of protection of IP 68. It sets fast at room temperature and becomes sticky and adhesive. It is ideal for filling and can be re-entered for repair work. The gel is also suitable for anticorrosion protection and is non toxic and safe. It has a high resistance to natural ageing.
The gel is supplied in 2 parts which are mixed immediately prior to use, making it economical in use, as only the required amount needs to be mixed at one time.
Viscous, opaque light blue fluid with good flowability
Gel time approx. 10 minutes at 23°C
Supplied in a divided bottle with beaker and stirrer
A multi-purpose, semi-rigid, polyurethane encapsulant, suitable for a wide range of electrical and electronic applications requiring environmental protection. The resin has high thermal conductivity and is heat resistant to 120°C. When mixed, the uncured liquid has very low viscosity ensuring good contact with the item being potted, and that no air pockets or voids are produced.
Halogen-free
Flame retardant to UL94V-0
Supplied in a 500g separated twin pack of resin and hardener, which can be mixed before opening
Robnor PX700K-1 twin-pack potting compound is a general-purpose, black, flame-retardant potting and encapsulating compound suitable for high voltage transformers, circuit boards, high voltage capacitors, anti-tamper security, etc.
Drop-in replacement for Robnor PX700K
Supplied in twin-packs enabling the resin and hardener to be mixed in the bag, preventing air entrapment and direct contact
Good thermal conductivity
High electrical insulating characteristics
High adhesion
Low shrinkage
UL94 V-0 @ 1.5mm
Excellent chemical & water resistance
Does not contain halogens or heavy metals
Each 50g makes approx. 29ml of compound
Supplied in a 50g pack
Robnor type PX700K-1
Once used, the containers must be kept sealed to prevent effects from water, air or contaminants.
Robnor PX700K-1 twin-pack potting compound is a general-purpose, black, flame-retardant potting and encapsulating compound suitable for high voltage transformers, circuit boards, high voltage capacitors, anti-tamper security, etc.
Drop-in replacement for Robnor PX700K
Supplied in twin-packs enabling the resin and hardener to be mixed in the bag, preventing air entrapment and direct contact
Good thermal conductivity
High electrical insulating characteristics
High adhesion
Low shrinkage
UL94 V-0 @ 1.5mm
Excellent chemical & water resistance
Does not contain halogens or heavy metals
Each 50g makes approx. 29ml of compound
Supplied in a 100g pack
Robnor type PX700K-1
Once used, the containers must be kept sealed to prevent effects from water, air or contaminants.
Robnor PX700K-1 twin-pack potting compound is a general-purpose, black, flame-retardant potting and encapsulating compound suitable for high voltage transformers, circuit boards, high voltage capacitors, anti-tamper security, etc.
Drop-in replacement for Robnor PX700K
Supplied in twin-packs enabling the resin and hardener to be mixed in the bag, preventing air entrapment and direct contact
Good thermal conductivity
High electrical insulating characteristics
High adhesion
Low shrinkage
UL94 V-0 @ 1.5mm
Excellent chemical & water resistance
Does not contain halogens or heavy metals
Each 50g makes approx. 29ml of compound
Supplied in a 1kg pack
Robnor type PX700K-1
Note: Once used, the containers must be kept sealed to prevent effects from water, air or contaminants.
Robnor PX700K-1 twin-pack potting compound is a general-purpose, black, flame-retardant potting and encapsulating compound suitable for high voltage transformers, circuit boards, high voltage capacitors, anti-tamper security, etc.
Drop-in replacement for Robnor PX700K
Supplied in twin-packs enabling the resin and hardener to be mixed in the bag, preventing air entrapment and direct contact
Good thermal conductivity
High electrical insulating characteristics
High adhesion
Low shrinkage
UL94 V-0 @ 1.5mm
Excellent chemical & water resistance
Does not contain halogens or heavy metals
Each 50g makes approx. 29ml of compound
Supplied in a 250g pack
Robnor type PX700K-1
Once used, the containers must be kept sealed to prevent effects from water, air or contaminants.
Robnor PX700K-1 twin-pack potting compound is a general-purpose, black, flame-retardant potting and encapsulating compound suitable for high voltage transformers, circuit boards, high voltage capacitors, anti-tamper security, etc.
Drop-in replacement for Robnor PX700K
Supplied in twin-packs enabling the resin and hardener to be mixed in the bag, preventing air entrapment and direct contact
Good thermal conductivity
High electrical insulating characteristics
High adhesion
Low shrinkage
UL94 V-0 @ 1.5mm
Excellent chemical & water resistance
Does not contain halogens or heavy metals
Each 50g makes approx. 29ml of compound
Supplied in a 500g pack
Robnor type PX700K-1
Once used, the containers must be kept sealed to prevent effects from water, air or contaminants.
A general-purpose, black flame-retardant epoxy potting and encapsulating compound ideal for potting electrical and electronic components and assemblies.
The compound is supplied in a divided pack containing pre-measured amounts of resin and hardener. When the dividing clip is removed, the two parts can be mixed in the bag, preventing air entrapment and direct contact.
PCB potting and encapsulation
Capacitors
Transformers
Deep sea electronics
Approved to UL94 V-0 @ 3mm
High electrical insulating characteristics
Low shrinkage
Good thermal conductivity
High adhesion
Good chemical and water resistance
Low exothermic temperature rise protects components during cure
Compatible with most electronic components including polystyrene capacitors
Supplied in a 50g divided pack containing both resin and hardener
A general-purpose, black flame-retardant epoxy potting and encapsulating compound ideal for potting electrical and electronic components and assemblies.
The compound is supplied in a divided pack containing pre-measured amounts of resin and hardener. When the dividing clip is removed, the two parts can be mixed in the bag, preventing air entrapment and direct contact.
PCB potting and encapsulation
Capacitors
Transformers
Deep sea electronics
Approved to UL94 V-0 @ 3mm
High electrical insulating characteristics
Low shrinkage
Good thermal conductivity
High adhesion
Good chemical and water resistance
Low exothermic temperature rise protects components during cure
Compatible with most electronic components including polystyrene capacitors
Supplied in a 100g divided pack containing both resin and hardener
A general-purpose, black flame-retardant epoxy potting and encapsulating compound ideal for potting electrical and electronic components and assemblies.
The compound is supplied in a divided pack containing pre-measured amounts of resin and hardener. When the dividing clip is removed, the two parts can be mixed in the bag, preventing air entrapment and direct contact.
PCB potting and encapsulation
Capacitors
Transformers
Deep sea electronics
Approved to UL94 V-0 @ 3mm
High electrical insulating characteristics
Low shrinkage
Good thermal conductivity
High adhesion
Good chemical and water resistance
Low exothermic temperature rise protects components during cure
Compatible with most electronic components including polystyrene capacitors
Supplied in a 1000g divided pack containing both resin and hardener
A general-purpose, black flame-retardant epoxy potting and encapsulating compound ideal for potting electrical and electronic components and assemblies.
The compound is supplied in a divided pack containing pre-measured amounts of resin and hardener. When the dividing clip is removed, the two parts can be mixed in the bag, preventing air entrapment and direct contact.
PCB potting and encapsulation
Capacitors
Transformers
Deep sea electronics
Approved to UL94 V-0 @ 3mm
High electrical insulating characteristics
Low shrinkage
Good thermal conductivity
High adhesion
Good chemical and water resistance
Low exothermic temperature rise protects components during cure
Compatible with most electronic components including polystyrene capacitors
Supplied in a 250g divided pack containing both resin and hardener
A general-purpose, black flame-retardant epoxy potting and encapsulating compound ideal for potting electrical and electronic components and assemblies.
The compound is supplied in a divided pack containing pre-measured amounts of resin and hardener. When the dividing clip is removed, the two parts can be mixed in the bag, preventing air entrapment and direct contact.
PCB potting and encapsulation
Capacitors
Transformers
Deep sea electronics
Approved to UL94 V-0 @ 3mm
High electrical insulating characteristics
Low shrinkage
Good thermal conductivity
High adhesion
Good chemical and water resistance
Low exothermic temperature rise protects components during cure
Compatible with most electronic components including polystyrene capacitors
Supplied in a 500g divided pack containing both resin and hardener
The Electronics in Meccano Circuits Shop is an affiliate of Rapid Electronics, and any purchases you make help support this website without affecting the price you pay! Any enquiries regarding products or order status should be directed to Rapid Electronics at www.rapidonline.com.
The Circuits Shop
