This liquid sensor from Comus has two gold plated metal probes fitted close to the body. When the probes detect the presence of liquids the change in resistance will activate the internal reed switch contacts and cause the contact to close and the circuit to be made.

• Liquid drains away from the probes and resistance will drop and the switch contacts will open
• Liquids of very poor viscosity may not drain away from the probes and will cause the switch contacts to remain closed

The EMAS SKF1A 10m PVC Bulb Float Switch is easy to assemble with a feature to adjust the requested operation interval with weight.There are different cable length options and this has a rating of IP68.

• PVC cable type
• Contact Material AgNi
• Phase Number 1 Phase
• Cable 10M
• Feature with Standard Weight

The EMAS SKF 10m Float Switch is easy to assemble and has a feature to adjust the requested operation interval with weight. Different cable lengths are an option with a rating of IP68.

• PVC cable type
• Contact Material - AgNi
• Phase Number - 1 Phase
• Cable length 10m
• With Standard Weight

This horizontally mounted liquid Level sensor uses a reed switch operated by a float-mounted magnet to give a very reliable device that has the ability to sense high or low liquid levels from the side of the tank. The sensor has an easy rapid push fit installation and is suitable for applications such as water high or low level, un-pressurised central heating systems, drinking water levels, organic solvents, etc.

• Horizontal - side entry
• Terminated by 2 x 100mm 22AWG 16/0.2mm wires
• NO or NC by sensor rotation
• Acetal housing with polypropylene float
• EPDM Sealing grommet

A side entry, horizontally mounted float switch type liquid level sensor that is manufactured in nylon 6.6 and is suitable for fuels and oils. Can be used for sensing rising or falling liquid levels (switch normally open or normally closed) simply by rotating mounting by 180°. Typical applications include level sensing of cooking oil, fuel, alcohol, sump levels, etc.

• External or internal fitting
• Easy installation
• Reliable reed switch operation
• High operating temperature
• Sealing components Nitrile washer and grommet
• Normally closed with float horizontal
• 2x 18AWG 32/0.2mm PVC insulated, 0.5m length
• UL E98428 listed model
• Gentech LS303-51N