The Controllino 100-200-00 is a Megai PLC DIN Rail Mountable Module that will provide an intelligent solution for the compatibility dilemma. This powerful module is able to connect open-source software with powerful PLC hardware for industrial applications or for building technology. By using a source code the inputs and outputs of the control unit are controlled individually.

The Controllino Mega is the top model using the ATmega2560 microcontroller with a clock speed of 16MHz. The control unit scores high with an Ethernet interface, extensive interface equipment (2x RS232, 1x RS485, 1x I2C, SPI 1x) and a total of 45 digital and analogue outputs.

This product focuses on the open-source Arduino programming language, which has an integrated developer environment (IDE).

The Controllino is simple to use. It has a pyramid shape so that all the In/Out connections can be seen in one glance.

• Additional product specs: ATmega2560 microcontroller
• 16 relay outputs
• 16 MHz clock speed
• Ethernet connector
• 2x RS232 interface
• 1x RS485 interface
• 1x SPI interface
• 1x I2C interface
• DIN rail mount (EN50022, 35mm)
• Storage temperature: -20°C to +70°C
• Colour: White/black
• Current consumption: max. 40A
• Digital inputs: 24
• Digital outputs: 12
• Operating voltage: 12V; 24V
• Manufacturer's part: Controllino 100-200-00 Mega

This Crouzet Millenium 3 logic controller can be used to automate small devices. The Millenium 3 logic functions can be used in numerous applications. It is easy to program (Ladder programming or using function blocks/Grafcet SFC).

The logic controller can be used in applications such as heating/air conditioning, access control, heat pumps, water and air treatment, waste treatment, lifting and handling, medical equipment, pump management and HVAC control. This logic controller is supplied with a display and rated at 24V DC.

• Budget solution with display
• Memory : 120 lines in LADDER language and up to 180 'typical' blocks in FBD language
• LCD with 4 lines of 18 characters and configurable backlighting
• Selective parameter setting : You can choose the parameters that can be adjusted on the front panel
• Analogue inputs 0-10 VDC or 0-20 mA/Pt 100 with converters
• No. of analogue inputs: 4
• No. of digital inputs: 8
• No. of inputs (max.): 4
• No. of relay outputs (max.): 4
• Dimensions, 90(H) x 59.5(L) x 71.2(W)mm
• Operating voltage: 24V DC
• Protection type: IP40
• Type (manufacturer type): Millenium 3 CD12
• Manufacturer part No.: 88970041

This Crouzet Millenium 3 XD10 R Expandable logic controller will give you enhanced performance. More memory, greater user comfort and increased modularity, the Expandable Millenium 3 offers all the advantages of the latest generation of logic controllers. It has a number of additional features, including a large backlit LCD screen, program password protection, a 10-year data backup function (even after a power failure), a choice of two programming languages (Ladder and Function Block/Grafcet SFC), as well as enhanced software performance with the addition of new functions and macro editing capability.

The logic controller can be used in applications such as heating/air conditioning, access control, heat pumps, water and air treatment, waste treatment, lifting and handling, medical equipment, pump management and HVAC control.

The enhanced logic controller is supplied with a display and rated at 24V DC.

• High-performance expandable solution with display
• Extended memory : 120 lines in LADDER language and up to 350 'typical' blocks in FBD language
• LCD with 4 lines of 18 characters and configurable backlighting
• Selective parameter setting : You can choose the parameters that can be adjusted on the front panel
• Analogue inputs 0-10V DC or 0-20mA/Pt 100 with converters
• Open to XN network communication extensions and digital I/O or analogue extensions
• No. of analogue inputs: 4
• No. of digital inputs: 6
• No. of inputs (max.): 4
• No. of relay outputs (max.): 4
• SPS component: SPS controller
• Dimensions, 90(H) x 59.5(L) x 71.2(W)mm
• Operating voltage: 24V DC
• Type (manufacturer type): Millenium 3 XD10 R
• Manufacturer part No.: 88970141

The Crouzet Millenium 3 EEPROM Memory Module (Cartridge) is a transfer tool for loading an application and updating the firmware at the same time, or for saving information from the Millenium 3.

• Brand/Series: Millenium 3
• For use with: Micro controllers
• Primary type: Option
• SPS component: SPS memory module
• Manufacturers part: EEPROM P/N 88 970 108

A smart relay from Schneider Electric's SR2 series.

• 10 I/O inputs
• Operating voltage: 24V DC
• With display
• Without clock
• 4 outputs
• Relay output
• Schneider Electric type SR2A101BD

A smart relay from Schneider Electric's SR2 series.

• 12 I/O inputs
• Operating voltage: 24V AC
• With display
• With clock
• 4 outputs
• Relay output
• Schneider Electric type SR2B121B

A smart relay from Schneider Electric's SR2 series.

• 12 I/O inputs
• Operating voltage: 100 to 240V AC
• With display
• With clock
• 4 outputs
• Relay output
• Schneider Electric type SR2B121FU

A connecting cable for use with smart relays from Schneider Electric's SR2 series.

Connects the relay to a PC loaded with Zelio Soft software.

• Cable type: USB
• Length 3m
• Schneider Electric type SR2USB01

Schneider Electric's XPSMCMCP0802 is an 8-input safety controller with 20 status LEDs showing the condition of the connected inputs and outputs.

• Functions include:
• Emergency stop conforming to EN/ISO 13850
• Guard monitoring conforming to EN/ISO 14119
• Enabling switch monitoring conforming to EN/IEC 60947-5-1
• Light curtain monitoring conforming to EN/IEC 61496-1
• Foot switch monitoring conforming to EN/IEC 60947-5-1
• Magnetic switch monitoring conforming to EN/ISO 14119
• Two-hand control conforming to EN 574
• Safety mat monitoring conforming to EN/ISO 14119
• Enabling switch monitoring conforming to EN 61326-1
• Muting function of light curtains conforming to EN/IEC 60947-5-1
• Counter functions conforming to EN/IEC 61800-5- 2
• Speed monitoring conforming to EN/IEC 61800-5- 2
• Schneider Electric type XPSMCMCP0802

The Siemens Logo Soft Comfort software is designed to allow you to quickly and easily develop programmes for Siemens’ programmable logic controllers using a drag and drop interface. Whilst developing the programmes you can make use of the offline simulation facility to ensure proper operation before putting it into a live operating environment. It also produces comprehensive documentation for each project with comments, parameter settings and switching programmes.

The latest version of the software features large, clear text and symbolic labels and messages for extra clarity plus it is able to store common programme blocks in a macro library to quickly perform standard tasks. In its network mode you can display up to 16 x nodes and up to 3 x programmes with drag and drop of signals from one to the other. With the LOGO! range’s Ethernet interfaces and integrated web server functions it is now possible to watch messages on a Smartphone or tablet.

The combination of these features makes your LOGO! control scheme easier to implement, maintain and troubleshoot than ever before.

• Category: PLC (SPS) software
• Programme Siemens PLCs
• Simulate your control scheme before roll-out
• Large labels for clarity
• Manufacturer part No.: 6ED1058-0BA08-0YA1