Search The Site...





Rapid ElectronicsThe Circuits Shop
Your link to the world of Rapid Electronics!
Return to the Homepage

Control Switch Enclosures

The Circuits Shop Enclosures Control Switch Enclosures

 Bookmark or Share This Page   

Europa Components
RC-1M 1-Hole Pushbutton Station Metal

 RC-1M 1-Hole Pushbutton Station Metal

This empty metal enclosure is designed as a self-assembly control station housing for 22.5mm push buttons and selector switches.

  • 1-hole Design
  • IP65 Rated
  • Metal clad in grey

Enclosure modification

 

Price

   

Rapid Electronics Code

22.44

   

56-9978

 

More info / buy

 

Europa Components
RC-2M 2-Hole Pushbutton Station Metal

 RC-2M 2-Hole Pushbutton Station Metal

Planning to buy a range of enclosures for your latest project?

This empty metal enclosure is designed as a self-assembly control station housing for 22.5mm push buttons and selector switches.
  • 2-hole Design
  • IP65 Rated
  • Metal clad in grey
 

Price

   

Rapid Electronics Code

27.04

   

56-9980

 

More info / buy

 

Europa Components
RC-2MS 2-Hole Pushbutton Station Metal With Shroud

 RC-2MS 2-Hole Pushbutton Station Metal With Shroud

Planning to buy a range of enclosures for your latest project?

This empty metal enclosure is designed as a self-assembly control station housing for 22.5mm push buttons and selector switches. The enclosure features a protective shroud that guards against inadvertent operation of the switch.
  • 2-hole Design
  • IP65 Rated
  • Top PG 16 x 1 cable entry
  • Metal clad in grey with yellow lid
 

Price

   

Rapid Electronics Code

30.50

   

56-9983

 

More info / buy

 

Europa Components
RC-3M 3-Hole Pushbutton Station Metal

 RC-3M 3-Hole Pushbutton Station Metal

Planning to buy a range of enclosures for your latest project?

This empty metal enclosure is designed as a self-assembly control station housing for 22.5mm push buttons and selector switches.
  • 3-hole Design
  • IP65 Rated
  • Metal clad in grey
 

Price

   

Rapid Electronics Code

27.82

   

56-9981

 

More info / buy

 

Europa Components
RC-3MS 3-Hole Pushbutton Station Metal With Shroud

 RC-3MS 3-Hole Pushbutton Station Metal With Shroud

This empty metal enclosure is designed as a self-assembly control station housing for 22.5mm push buttons and selector switches. The enclosure features a protective shroud that guards against inadvertent operation of the switch.

  • 3-hole Design
  • IP65 Rated
  • Top PG 16 x 1 cable entry
  • Metal clad in grey with yellow lid

Enclosure modification

 

Price

   

Rapid Electronics Code

38.95

   

56-9984

 

More info / buy

 

Hammond
1554MPB1 22.5mm Pushbutton Enclosure 90x90x60mm Polycarbonate Grey

 1554MPB1 22.5mm Pushbutton Enclosure 90x90x60mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 22mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 90 x 90 x 60mm
  • Number of holes: 1
  • Hole diameter: 22.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554MPB1

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

33.29

   

31-1645

 

More info / buy

 

Hammond
1554MPB1A 22.5mm Pushbutton Enclosure 90x90x90mm Polycarbonate Grey

 1554MPB1A 22.5mm Pushbutton Enclosure 90x90x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 22mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 90 x 90 x 90mm
  • Number of holes: 1
  • Hole diameter: 22.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554MPB1A

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

35.76

   

31-1646

 

More info / buy

 

Hammond
1554MPB2 22.5mm Pushbutton Enclosure 160x90x60mm Polycarbonate Grey

 1554MPB2 22.5mm Pushbutton Enclosure 160x90x60mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 22mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 160 x 90 x 60mm
  • Number of holes: 2
  • Hole diameter: 22.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554MPB2

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

40.25

   

31-1647

 

More info / buy

 

Hammond
1554MPB2D 22.5mm Pushbutton Enclosure 160x90x90mm Polycarbonate Grey

 1554MPB2D 22.5mm Pushbutton Enclosure 160x90x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 22mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 160 x 90 x 90mm
  • Number of holes: 2
  • Hole diameter: 22.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554MPB2D

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

33.95

   

31-1648

 

More info / buy

 

Hammond
1554MPB3 22.5mm Pushbutton Enclosure 200x120x90mm Polycarbonate Grey

 1554MPB3 22.5mm Pushbutton Enclosure 200x120x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 22mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 200 x 120 x 90mm
  • Number of holes: 3
  • Hole diameter: 22.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554MPB3

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

49.66

   

31-1649

 

More info / buy

 

Hammond
1554MPB4 22.5mm Pushbutton Enclosure 200x120x90mm Polycarbonate Grey

 1554MPB4 22.5mm Pushbutton Enclosure 200x120x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 22mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 200 x 120 x 90mm
  • Number of holes: 4
  • Hole diameter: 22.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554MPB4

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

53.60

   

31-1650

 

More info / buy

 

Hammond
1554MPB6 22.5mm Pushbutton Enclosure 240x160x90mm Polycarbonate Grey

 1554MPB6 22.5mm Pushbutton Enclosure 240x160x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 22mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 240 x 160 x 90mm
  • Number of holes: 6
  • Hole diameter: 22.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554MPB6

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

66.20

   

31-1651

 

More info / buy

 

Hammond
1554MPB6A 22.5mm Pushbutton Enclosure 240x160x90mm Polycarbonate Grey

 1554MPB6A 22.5mm Pushbutton Enclosure 240x160x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 22mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 240 x 160 x 90mm
  • Number of holes: 6
  • Hole diameter: 22.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554MPB6A

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

57.29

   

31-1652

 

More info / buy

 

Hammond
1554MPB6B 22.5mm Pushbutton Enclosure 240x160x120mm Polycarbonate Grey

 1554MPB6B 22.5mm Pushbutton Enclosure 240x160x120mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 22mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 240 x 160 x 120mm
  • Number of holes: 6
  • Hole diameter: 22.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554MPB6B

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

61.12

   

31-1653

 

More info / buy

 

Hammond
1554PB1 30.5mm Pushbutton Enclosure 90x90x60mm Polycarbonate Grey

 1554PB1 30.5mm Pushbutton Enclosure 90x90x60mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 30.5mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 90 x 90 x 60mm
  • Number of holes: 1
  • Hole diameter: 30.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554PB1

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

34.86

   

31-1654

 

More info / buy

 

Hammond
1554PB1A 30.5mm Pushbutton Enclosure 90x90x90mm Polycarbonate Grey

 1554PB1A 30.5mm Pushbutton Enclosure 90x90x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 30.5mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 90 x 90 x 90mm
  • Number of holes: 1
  • Hole diameter: 30.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554PB1A

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

28.08

   

31-1655

 

More info / buy

 

Hammond
1554PB2 30.5mm Pushbutton Enclosure 160x90x60mm Polycarbonate Grey

 1554PB2 30.5mm Pushbutton Enclosure 160x90x60mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 30.5mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 160 x 90 x 60mm
  • Number of holes: 2
  • Hole diameter: 30.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554PB2

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

41.69

   

31-1656

 

More info / buy

 

Hammond
1554PB2D 30.5mm Pushbutton Enclosure 160x90x90mm Polycarbonate Grey

 1554PB2D 30.5mm Pushbutton Enclosure 160x90x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 30.5mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 160 x 90 x 90mm
  • Number of holes: 2
  • Hole diameter: 30.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554PB2D

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

44.42

   

31-1657

 

More info / buy

 

Hammond
1554PB3 30.5mm Pushbutton Enclosure 200x120x90mm Polycarbonate Grey

 1554PB3 30.5mm Pushbutton Enclosure 200x120x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 30.5mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 200 x 120 x 90mm
  • Number of holes: 3
  • Hole diameter: 30.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554PB3

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

49.66

   

31-1658

 

More info / buy

 

Hammond
1554PB4 30.5mm Pushbutton Enclosure 200x120x90mm Polycarbonate Grey

 1554PB4 30.5mm Pushbutton Enclosure 200x120x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 30.5mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 200 x 120 x 90mm
  • Number of holes: 4
  • Hole diameter: 30.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554PB4

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

52.19

   

31-1659

 

More info / buy

 

Hammond
1554PB6 30.5mm Pushbutton Enclosure 240x160x90mm Polycarbonate Grey

 1554PB6 30.5mm Pushbutton Enclosure 240x160x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 30.5mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 240 x 160 x 90mm
  • Number of holes: 6
  • Hole diameter: 30.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554PB6

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

73.08

   

31-1660

 

More info / buy

 

Hammond
1554PB6A 30.5mm Pushbutton Enclosure 240x160x90mm Polycarbonate Grey

 1554PB6A 30.5mm Pushbutton Enclosure 240x160x90mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 30.5mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 240 x 160 x 90mm
  • Number of holes: 6
  • Hole diameter: 30.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554PB6A

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

57.26

   

31-1661

 

More info / buy

 

Hammond
1554PB6B 30.5mm Pushbutton Enclosure 240x160x120mm Polycarbonate Grey

 1554PB6B 30.5mm Pushbutton Enclosure 240x160x120mm Polycarbonate Grey

A pushbutton enclosure from the Hammond 1554 series, moulded in light grey polycarbonate. The enclosure is designed for mounting 30.5mm diameter control switches and accessories like pushbuttons and / or matching indicators.

  • Enclosure dimensions: 240 x 160 x 120mm
  • Number of holes: 6
  • Hole diameter: 30.5mm
  • Polycarbonate material carries a UL flammability rating of UL94 5V and is suitable for outdoor use
  • Lid and mounting holes are located outside of the gasket seal
  • Lid is secured with self captivating M4 stainless steel machine screws (included), threaded into integral stainless steel bushings (for repetitive assembly & disassembly)
  • All-stainless steel hardware avoids corrosion caused by dissimilar metals
  • Replaceable gasket is made from a pre-formed, high temperature UL listed silicone rubber
  • Gasketed lid with two piece 'tongue & groove' construction provides protection against ingress of oil, dust and water
  • Internal DIN rail mounting tabs
  • Threaded (M3) integral brass inserts & standoffs designed for M3.5 or #6 self-tapping screws for PCB or inner panel mounting
  • Vertical moulded PCB guides for 1.5mm thick PCBs
  • Material colour is light grey (RAL 7035)
  • Standards: IP66 NEMA 4, 4X, 6, 6P, 12 & 13 UL94 5V
  • Hammond type 1554PB6B

Hammond enclosure modification

 

Price

   

Rapid Electronics Code

61.12

   

31-1662

 

More info / buy

 

Schneider Electric
XALD01 Control Station 1 Way Empty

 XALD01 Control Station 1 Way Empty

Planning to buy a range of enclosures for your latest project?

This empty 1 cut-out polycarbonate control station is designed for use with Ø 22mm control and signalling components such as pushbuttons, pilot lights, selector switches, emergency pushbuttons, key switches, etc. The enclosure has a light grey base and a dark grey lid and can be front or rear mounted.
  • Dimensions H x W x L 68 x 68 x 53mm
  • Knock-outs for cable entry
  • Overvoltage class II
  • Ambient temperature -40C to +70C
  • Standards UL, JIS C, EN/IEC, CSA
 

Price

   

Rapid Electronics Code

14.60

   

64-9846

 

More info / buy

 

Schneider Electric
XALD02 Control Station 2 Way Empty

 XALD02 Control Station 2 Way Empty

Planning to buy a range of enclosures for your latest project?

This empty 2 cut-out polycarbonate control station is designed for use with Ø 22mm control and signalling components such as pushbuttons, pilot lights, selector switches, emergency pushbuttons, key switches, etc. The enclosure has a light grey base and a dark grey lid and can be front or rear mounted.
  • Dimensions H x W x L 106 x 68 x 53mm
  • Knock-outs for cable entry
  • Overvoltage class II
  • Ambient temperature -40C to +70C
  • Standards UL, JIS C, EN/IEC, CSA
 

Price

   

Rapid Electronics Code

19.68

   

64-9847

 

More info / buy

 

Page:    1


The Electronics in Meccano Circuits Shop is an affiliate of Rapid Electronics, and any purchases you make help support this website without affecting the price you pay! Any enquiries regarding products or order status should be directed to Rapid Electronics at www.rapidonline.com.

Top of Page | Homepage | About | Search | Topics | Features | Circuits Shop | yourEiM

© 1998 - 2024 Tim Surtell