A cost-effective leaf-spring and button type battery contact, designed to contact with a single A or AA size battery.

• Designed to 'snap-on' to panels and securely anchor to the flanges on a moulded battery compartment
• Ideal for use on plastic boxes
• Highly reliable
• Self-adjusting to accommodate a variety of battery lengths

Battery clips for PP3 and PP6 type 9V batteries.

• For 1x 9V battery
• Wire lead terminals
• 31mm long
• 14mm wide
• End entry
• Wires: 150mm black and red
• Suit PP3 and PP6 type 9V batteries

Battery clips for PP3 and PP6 type 9V batteries.

• For 1x 9V battery
• Wire lead terminals
• 31mm long
• 14mm wide
• End entry
• Wires: 200mm black and red
• Suit PP3 and PP6 type 9V batteries

A heavy duty battery clip with 300mm wires entering the cover at the side.

• Heavy duty battery clip
• PP3 size battery
• 24.5mm long, 11.8mm wide, 7.3mm high
• Side entry
• Hard moulded ABS cover makes the clip more robust
• Fitted with 300mm black and red leads with stripped and tinned ends

Snap-in battery clip for AAA battery, ideal for top-side PCB mounting.

• Reliable connections with a low contact resistance
• Manufactured from sprung steel with a nickel plated finish
• PCB to battery connection
• Shock and vibration resistant
• Unique snap-in mounting feature assures firm positioning
• Nickel-plated steel contact
• Battery clip adjusts and accept batteries with different overall lengths

Snap-in battery clip for AAA battery, ideal for top-side PCB mounting.

• Reliable connections with a low contact resistance
• Manufactured from sprung steel with a nickel plated finish
• PCB to battery connection
• Shock and vibration resistant
• Unique snap-in mounting feature assures firm positioning
• Nickel-plated steel contact
• Battery clip adjusts and accept batteries with different overall lengths

Economical and reliable surface mount coin cell battery retainer clip, designed for quick and easy battery installation and replacement. Suitable for use with CR2016, CR2020, CR2025 and CR2032 batteries.

• Low profile for densely packed PCBs
• Retains cell securely
• Withstands shock and vibration
• Reliable dual spring contacts
• Polarity clearly marked (+)
• Stable mount legs for increased strength
• Nickel plated phosphor bronze contacts
• Size 30.5 x 22.8 x 3.85mm

Economical and reliable through-hole coin cell battery retainer clip, designed for quick and easy battery installation and replacement. Suitable for use with CR2016, CR2020, CR2025 and CR2032 batteries.

• Low profile for densely packed PCBs
• Retains cell securely
• Withstands shock and vibration
• Reliable dual spring contacts
• Polarity clearly marked (+)
• Stable mount legs for increased strength
• Nickel plated phosphor bronze contacts
• Size 22.4 x 19.6 x 6.3mm

A spring metal clip for physically holding PP3 batteries.

• Single M3 fixing hole
• Dimensions: 24(W) x 26(H) x 17mm(D)

A heavy duty battery clip with 150mm wires entering the cover at the side.

• Heavy duty battery clip
• PP3 size battery
• 24.5mm long, 11.8mm wide, 7.3mm high
• Side entry
• Hard moulded ABS cover makes the clip more robust
• Fitted with 150mm black and red leads with stripped and tinned ends

A heavy duty battery clip with 200mm wires entering the cover at the side.

• Heavy duty battery clip
• PP3 size battery
• 24.5mm long, 11.8mm wide, 7.3mm high
• Side entry
• Hard moulded ABS cover makes the clip more robust
• Fitted with 200mm black and red leads with stripped and tinned ends

A heavy duty battery clip with 150mm long wires entering the cover at one end.

• Heavy duty battery clip
• PP3 size battery
• 24.5mm long, 11.8mm wide, 7.3mm high
• End entry
• Fitted with 150mm black and red wires with stripped and tinned ends

This battery connector is for use with PP3 (9V) type batteries. It has 45mm pre-stripped and tinned wires entering the end. The cover is hard moulded ABS.

• Heavy duty battery clip with side entry wires
• The hard moulded ABS cover makes this clip more robust
• Colour coded leads with stripped and tinned ends
• 45mm leads
• PP3 style clip

A heavy duty battery clip with 200mm long wires entering the cover at one end.

• Heavy duty battery clip
• PP3 size battery
• 24.5mm long, 11.8mm wide, 7.3mm high
• End entry
• Fitted with 200mm black and red wires with stripped and tinned ends

A heavy duty battery clip with 300mm long wires entering the cover at one end.

• Heavy duty battery clip
• PP3 size battery
• 24.5mm long, 11.8mm wide, 7.3mm high
• End entry
• Fitted with 300mm black and red wires with stripped and tinned ends

An economical PCB mount clip. The height of the clip is such that the battery lays on the surface of the PCB when connected.

• Positive battery clip
• PP3 size battery
• PCB tags
• 17mm long, 10.2mm wide, 7mm high
• Height above PCB 14mm
• Suitable for 9V batteries, e.g., PP3

An economical PCB mount clip. The height of the clip is such that the battery lays on the surface of the PCB when connected.

• Negative battery clip
• PP3 size battery
• PCB tags
• 17mm long, 10.2mm wide, 7mm high
• Height above PCB 14mm
• Suitable for 9V batteries, e.g., PP3

A nickel plated 0.5mm thick spring steel positive clip for retaining and connecting to coin cells. The clip is designed for PCB mounting in self-contained, custom moulded non-metallic battery compartments.

• Positive coin cell contact
• Nickel plated copper contact
• PCB terminal
• Length 21.4mm
• Height above PCB 8.3mm
• Width 3.2mm
• Contact stamped with + symbol
• Keystone type 105-2

Economical and reliable snap-on battery clip, 6.4mm long, 9.1mm high, for AAA/AAAA/N size batteries.

• Ideal for moulded cases with self contained battery compartments
• The contacts snap on to panel edges or lugs from 1.5 to 1.8mm thickness and are retained in position by barbs
• The design incorporates a solder 'ear' to facilitate soldering of wire leads

Economical and reliable snap-on single battery clip, 7.9mm long, 11.4mm high, for A/AA batteries.

• Ideal for moulded cases with self contained battery compartments
• The contacts snap on to panel edges or lugs from 1.5 to 1.8mm thickness and are retained in position by barbs
• The design incorporates a solder 'ear' to facilitate soldering of wire leads
• Separate single contact available with a raised circular ring to locate with the raised positive 'pip'

Economical and reliable snap-on dual battery clip, 20.8mm long, 11.4mm high, for A/AA batteries.

• Ideal for moulded cases with self contained battery compartments
• The contacts snap on to panel edges or lugs from 1.5 to 1.8mm thickness and are retained in position by barbs
• The design incorporates a solder 'ear' to facilitate soldering of wire leads
• Separate single contact is available with a raised circular ring to locate with the raised positive 'pip'

Spring battery contact from Keystone suitable for A and AA size batteries.

• Contacts are made from nickel plated spring steel
• Easy to assemble into cases/holders with eyelets or rivets
• Diameter 3.6mm
• Length 7.4mm

Spring battery contact from Keystone suitable for C and D size batteries.

• Contacts are made from nickel plated spring steel
• Easy to assemble into cases/holders with eyelets or rivets
• Diameter 7.6mm
• Length 21.6mm

The Keystone 233 9V Battery Clip PP3 is supplied with a vinyl base construction, available in 150mm lead length for economy.

• Battery Strap
• Nickel Plated Brass Contact
• Wire Lead Terminal
• 31.8 x 13.5mm
• 26AWG Wire
• Battery Strap with I Configuration
• Fully Insulated and Feature Brass
• Nickel Plated Snap-On Connectors
• Red and Black Tinned Lead Wires

The Keystone 234 9V Battery Clip PP3 is supplied with a vinyl base construction, available in 200mm lead length for economy.

• Battery Strap
• Nickel Plated Brass Contact
• Wire Lead Terminal
• 31.8 x 13.5mm
• 26AWG Wire
• Battery Strap with I Configuration
• Fully Insulated and Feature Brass
• Nickel Plated Snap-On Connectors
• Red and Black Tinned Lead Wires

Economical and reliable 12mm coin cell retainer with nickel-plated phosphor bronze surface mount terminal.

• Designed for quick and easy battery installation and replacement
• Perfect for memory backup applications where the ultra low profile allows high density packing of PCBs
• Negative battery connection is achieved by the battery contacting the PCB track directly
• Dimensions (L x W x H) 18.9 x 12.7 x 3.2mm

Economical and reliable 20mm coin cell retainer with nickel-plated phosphor bronze surface mount terminal.

• Designed for quick and easy battery installation and replacement
• Perfect for memory backup applications where the ultra low profile allows high density packing of PCBs
• Negative battery connection is achieved by the battery contacting the PCB track directly
• Dimensions (L x W x H) 30.7 x 19.9 x 4mm

PCB mounting, nickel-plated battery contacts for AA and PP3 size batteries.

• Sprung negative battery contact
• AA / PP3 size batteries
• Tin nickel plated spring steel contact
• PCB terminals
• 10.6mm long, 6.3mm wide, 11.4mm high
• Keystone type 590

A rigid battery clip from Keystone for 9V (PP3 type) batteries. The special safety design completely covers the exposed metal studs on the top of the battery once fitted.

• Nickel plated snap-on connectors
• Supplied with no trailing leads

A PCB mounting battery clip that securely holds and connects directly to a PCB.

• Battery clip
• Takes AAA and N size batteries
• Tin nickel plated steel contact
• PCB terminal
• 7.6mm wide, 12.7mm high
• Securely hold and connect directly to the PCB
• Various sizes of batteries including fractional sizes can be accommodated by varying the distance between two clips
• The spring clips allow batteries of varying diameters to be held securely
• The Snap-In design holds the clips securely in the PCB for wave or hand soldering
• Sold singly
• Keystone type 82

This cap will protect 9V battery packs when they are not in use.

• Snap fits onto battery contacts
• Both male and female contacts are covered
• Reduces the potential risk of a short circuit between battery poles
• Protects battery contacts from dirt, dust and contamination
• Supplied in black
• Impact resistant polypropylene
• Size 24.4 x 9.5 x 3mm

Battery clip with 150mm long wires entering the cover at one end. The ends of the wires are fitted with PCB connection pins.

• Battery clip
• PP3, 9V size battery
• Clip dimensions: 24.5mm long, 11.8mm wide, 7.3mm high
• End entry
• Fitted with 150mm black and red wires terminated with PCB pins
• Supplied Qty: 1

Twin 'mouse type' battery clips.

• Suitable for PP1 and PP9 type batteries
• 100mm flying leads

Twin 'mouse type' battery clips.

• Suitable for PP1 and PP9 type batteries
• 305mm flying leads