A DIN rail mount power supply (PSU) designed especially for the industrial automation markets.

• Supplied as 120W option
• Compact design
• Universal input voltage

A DIN rail mount power supply (PSU) designed especially for the industrial automation markets.

• Supplied as 240W option
• Compact design
• Universal input voltage

A DIN rail mount power supply (PSU) designed especially for the industrial automation markets.

• Supplied as 60W option
• Compact design
• Universal input voltage

Ultra slim step shape power supply unit from the Mean Well HDR series, suitable for DIN rail mounting and ideal for a range of automation applications in the workplace and in the home.

• Output voltage 12V DC
• Output current 1.25A
• Rated power 15W
• Narrow width allows space saving inside cabinets
• Universal input
• Cooling by free air convection
• Short circuit, overload and over voltage protection
• Adjustable DC output voltage
• Isolation class II
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 90 x 54.5 x 17.5mm
• 3 year warranty
• Manufacturer's part HDR-15-12

Ultra slim step shape power supply unit from the Mean Well HDR series, suitable for DIN rail mounting and ideal for a range of automation applications in the workplace and in the home.

• Output voltage 24V DC
• Output current 1.5A
• Rated power 36W
• Narrow width allows space saving inside cabinets
• Universal input
• Cooling by free air convection
• Short circuit, overload and over voltage protection
• Adjustable DC output voltage
• Isolation class II
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 90 x 54.5 x 35mm
• 3 year warranty
• Manufacturer's part HDR-30-24

Single output industrial power supply unit from the Mean Well MDR series, suitable for DIN rail mounting.

• Output voltage 24V DC
• Output current 4A
• Rated power 96W
• Universal AC input
• LED indicator for power on
• Cooling by free air convection
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part MDR-100-24

Single output industrial power supply unit from the Mean Well MDR series, suitable for DIN rail mounting.

• Output voltage 12V DC
• Output current 0.84A
• Rated power 10W
• Universal AC input
• LED indicator for power on
• Cooling by free air convection
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part MDR-10-12

Single output industrial power supply unit from the Mean Well MDR series, suitable for DIN rail mounting.

• Output voltage 24V DC
• Output current 0.42A
• Rated power 10W
• Universal AC input
• LED indicator for power on
• Cooling by free air convection
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part MDR-10-24

Single output industrial power supply unit from the Mean Well MDR series, suitable for DIN rail mounting.

• Output voltage 12V DC
• Output current 1.67A
• Rated power 20.04W
• Universal AC input
• LED indicator for power on
• Cooling by free air convection
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part MDR-20-12

Single output industrial power supply unit from the Mean Well MDR series, suitable for DIN rail mounting.

• Output voltage 24V DC
• Output current 1A
• Rated power 24W
• Universal AC input
• LED indicator for power on
• Cooling by free air convection
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part MDR-20-24

Single output industrial power supply unit from the Mean Well MDR series, suitable for DIN rail mounting.

• Output voltage 12V DC
• Output current 3.33A
• Rated power 40W
• Universal AC input
• LED indicator for power on
• Cooling by free air convection
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part MDR-40-12

Single output industrial power supply unit from the Mean Well MDR series, suitable for DIN rail mounting.

• Output voltage 24V DC
• Output current 1.7A
• Rated power 40.8W
• Universal AC input
• LED indicator for power on
• Cooling by free air convection
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part MDR-40-24

Single output industrial power supply unit from the Mean Well MDR series, suitable for DIN rail mounting.

• Output voltage 12V DC
• Output current 5A
• Rated power 60W
• Universal AC input
• LED indicator for power on
• Cooling by free air convection
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part MDR-60-12

Single output industrial power supply unit from the Mean Well MDR series, suitable for DIN rail mounting.

• Output voltage 24V DC
• Output current 2.5A
• Rated power 60W
• Universal AC input
• LED indicator for power on
• Cooling by free air convection
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part MDR-60-24

Economical slimline single output power supply unit from the Mean Well NDR series, suitable for DIN rail mounting and ideal for a range of industrial applications. With a high working efficiency, the unit can operate at ambient temperatures between -20 and +70°C under air convection.

• Output voltage 12V DC
• Output current 10A
• Rated power 120W
• Dimensions 125.2 x 113.5 x 40mm
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part NDR-120-12

Economical slimline single output power supply unit from the Mean Well NDR series, suitable for DIN rail mounting and ideal for a range of industrial applications. With a high working efficiency, the unit can operate at ambient temperatures between -20 and +70°C under air convection.

• Output voltage 24V DC
• Output current 5A
• Rated power 120W
• Dimensions 125.2 x 113.5 x 40mm
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part NDR-120-24

Economical slimline single output power supply unit from the Mean Well NDR series, suitable for DIN rail mounting and ideal for a range of industrial applications. With a high working efficiency, the unit can operate at ambient temperatures between -20 and +70°C under air convection.

• Output voltage 24V DC
• Output current 10A
• Rated power 240W
• Dimensions 125.2 x 113.5 x 63mm
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part NDR-240-24

Economical slimline single output power supply unit from the Mean Well NDR series, suitable for DIN rail mounting and ideal for a range of industrial applications. With a high working efficiency, the unit can operate at ambient temperatures between -20 and +70°C under air convection.

• Output voltage 12V DC
• Output current 6.3A
• Rated power 75.6W
• Dimensions 125.2 x 102 x 32mm
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part NDR-75-12

Economical slimline single output power supply unit from the Mean Well NDR series, suitable for DIN rail mounting and ideal for a range of industrial applications. With a high working efficiency, the unit can operate at ambient temperatures between -20 and +70°C under air convection.

• Output voltage 24V DC
• Output current 3.2A
• Rated power 76.8W
• Dimensions 125.2 x 102 x 32mm
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• 3 year warranty
• Manufacturer's part NDR-75-24

Slimline single output power supply unit from the Mean Well SDR series with built-in active PFC function, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 12V DC
• Output current 10A
• Rated power 120W
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 113.5 x 40mm
• 3 year warranty
• Manufacturer's part SDR-120-12

Slimline single output power supply unit from the Mean Well SDR series with built-in active PFC function, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 24V DC
• Output current 5A
• Rated power 120W
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 113.5 x 40mm
• 3 year warranty
• Manufacturer's part SDR-120-24

Slimline single output power supply unit from the Mean Well SDR series with built-in active PFC function, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 24V DC
• Output current 10A
• Rated power 240W
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 113.5 x 63mm
• 3 year warranty
• Manufacturer's part SDR-240-24

Slimline single output power supply unit from the Mean Well SDR series with built-in active PFC function, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 24V DC
• Output current 20A
• Rated power 480W
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 128.5 x 85.5mm
• 3 year warranty
• Manufacturer's part SDR-480-24

Slimline single output power supply unit from the Mean Well SDR series, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 12V DC
• Output current 6.3A
• Rated power 75.6W
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 102 x 32mm
• 3 year warranty
• Manufacturer's part SDR-75-12

Slimline single output power supply unit from the Mean Well SDR series, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 24V DC
• Output current 3.2A
• Rated power 76.8W
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 102 x 32mm
• 3 year warranty
• Manufacturer's part SDR-75-24

Slimline single output power supply unit from the Mean Well SDR series with built-in active PFC function, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 24V DC
• Output current 40A
• Rated power 960W
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 150 x 110mm
• 3 year warranty
• Manufacturer's part SDR-960-24

Single output power supply unit from the Mean Well WDR series with built-in active PFC, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 12V DC
• Output current 10A
• Rated power 120W
• Wide input range
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Built in DC OK relay contact
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 113.5 x 40mm
• 3 year warranty
• Manufacturer's part WDR-120-12

Single output power supply unit from the Mean Well WDR series with built-in active PFC, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 24V DC
• Output current 5A
• Rated power 120W
• Wide input range
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Built in DC OK relay contact
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 113.5 x 40mm
• 3 year warranty
• Manufacturer's part WDR-120-24

Single output power supply unit from the Mean Well WDR series with built-in active PFC, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 24V DC
• Output current 10A
• Rated power 240W
• Wide input range
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Built in DC OK relay contact
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 113.5 x 63mm
• 3 year warranty
• Manufacturer's part WDR-240-24

Single output power supply unit from the Mean Well WDR series with built-in active PFC, suitable for DIN rail mounting and ideal for a range of industrial applications.

• Output voltage 24V DC
• Output current 20A
• Rated power 480W
• Wide input range
• Very high efficiency with low power dissipation
• Cooling by free air convection
• Short circuit, overload, over voltage and over temperature protection
• Metal case
• Built in DC OK relay contact
• Suitable for installation on DIN rail TS-35/7.5 or 15
• Dimensions 125.2 x 128.5 x 85.5mm
• 3 year warranty
• Manufacturer's part WDR-480-24

This DIN Rail mounting fuseholder in 3-pole configuration from Mersen accommodates 10 x 38mm industrial fuses.

• Current rating 32A
• Voltage rating 690V
• Incorporates an operating handle for non-load disconnection and electrical isolation
• Fuse replacement without tools

A power supply from Phoenix Contact with SFB technology for highest system availability. With 6-line operating current for 12MS, the standard-output switch also triggers reliably and fast. The preventive function monitoring indicates critical function status, before error occurrence. Offering a steady start in heavy load through Power boost, plus remote monitoring through active switching output and potential free relais contact. Balancing of voltage cases and charging of battery by adjustable output voltage, while high reliability through long mains buffering times> 20 ms Connectors: screw terminals, including max.10A service friendly screw/pluggable terminals. Efficient operation of 3-phase devices, even when a phase permanently fails.Worldwide use of wide-range output and international approval package, while other features include: higher operational safety in long power failure through buffering full load and higher MTBF > 500 000 h, parallel switch bar for increased output and redundancy, and simplified operation by LED fault monitoring.

• Input voltage range: 3x 320-575V AC, 450-800V DC
• Output: 24V DC 20A 480W, 3 phase
• Switched Mode
• Termination type: Screw terminals
• Preventive function monitoring
• Power boost-Reliable start of heavy loads
• SFB technology-fast trigger standard circuit breaker
• Manufacturer's part 2866792

This power supply from Phoenix Contact offers low no-load losses and high efficiency energy saving. High power density, especially in compact switch boxes for the perfect solution.

• Worldwide compatible for input voltage range
• Input voltage 85V AC-264V AC
• Entrance 1-phase
• Highest plant availability through reliable supply of 12V DC/2.5A
• Maximum energy efficiency through optimized efficiency over the entire operating range of the power supply and low idling losses
• Compact: 30W of power from only 22.5mm wide power supply
• Connections: Screw
• Temperature: -25 to 70°C
• Manufacturer's part 2902998

This DIN rail power supply from PULS has been manufactured to a high standard, with a compact design that is ideal for installation in an enclosure. It is intended for professional use in areas such as industrial control, office, communication, and instrumentation equipment.

Some of the main features include the high efficiency, advanced inrush current limitation, active PFC and wide operational temperature range. It also includes a power reserve of 20%, which can be used continuously at temperatures up to +45°C. Additionally, the CP10 can deliver three times the nominal output current for at least 12ms, helping to trip fuses on faulty output branches.

The PSU is equipped with quick-connect spring-clamp terminals for a fast and reliable electrical connection. Spring-clamp terminals are the preferred terminals when applications are exposed to mechanical vibration. The unit also offers high immunity to transients and power surges, as well as low electromagnetic emission and a DC-OK relay contact.The CP10.241 unit comes with a manufacturer's three-year warranty and a large international approval package for a variety of applications, making it suitable for nearly every situation.

• AC 100-240V wide-range Input
• Width only 39mm
• Efficiency up to 95.2%, excellent partial load efficiency
• 20% output power reserves
• Easy fuse breaking due to high overload peak current
• Active power factor correction
• Minimal inrush current surge
• Full power between -25°C and +60°C
• DC-OK relay contact
• Meets ITE, ATEX, Class I Div2 and SEMI F47 requirements
• Manufacturer's part CP10.241

This DIN rail power supply from PULS is a cost-efficient device with no compromises in quality, reliability, size, and power reserves. Features include: single-phase, 20% power reserve (power boost), adjustable output voltage, active power current limiting, full power from -25 to +60°C and large screw terminals.

• Input voltage range: 115/230V AC
• 1 phase
• Output: 24V DC 10A 240W
• Termination type: Screw terminal
• Dimensions 60 x 124 x 117mm
• Manufacturer's part CS10.241

This DIN rail power supply from PULS is a cost-efficient device with no compromises in quality, reliability, size, and power reserves. Features include: single-phase, 20% power reserve (power boost), adjustable output voltage, active power current limiting, full power from -25 to +60°C and large screw terminals.

• Input voltage range: 115/230V AC
• 1 phase
• Output: 48V DC 5A 240W
• Termination type: Screw terminal
• Dimensions 60 x 124 x 117mm
• Manufacturer's part CS10.481

This DIN rail power supply from PULS is a cost-efficient device with no compromises in quality, reliability, size, and power reserves. Features include: single-phase, AC/DC wide input range, 20% power reserve (power boost), adjustable output voltage, active power current limiting, full power from -25 to +60°C and large screw terminals.

• Input voltage range: 115/230V AC
• 1 phase
• Output: 24V DC 5A 120W
• Synchronised
• Termination type: Screw terminal
• Dimensions 32 x 124 x 117mm
• Manufacturer's part CS5.241

This power supply from PULS belongs to the MiniLine series, covering lower power requirements and supplied in rugged plastic housing, both highly efficient and compact. Takes just seconds to install and offers superb reliability.

• Input voltage range: 85-264 V AC, 85-375V DC
• 1 phase
• Output: 5V DC 3A 15W
• Switched Mode
• Termination type: Screw terminals
• Dimensions 23 x 75 x 91mm
• Manufacturer's part ML15.051

This MiniLine power supply from PULS covers lower power requirements and is equipped with rugged plastic housing, both highly efficient and compact. The supply takes just seconds to install and offers superb reliability. Features include: spring-loaded connecting terminals, robust plastic housing and worldwide approvals (UL, EN, CSA, CB Scheme) for industry and office/home.

• Input voltage range: 85-264 V AC, 85-375V DC
• 1 phase
• Output: 24V DC 2.1A 50W
• Switched Mode
• Termination type: Spring cage terminal
• Dimensions 45 x 75 x 91mm
• Manufacturer's part ML50.100

This power supply from PULS belongs to the MiniLine series, covering lower power requirements and supplied in rugged plastic housing, both efficient and compact. Takes just seconds to install and offers superb reliability.

• Input voltage range: 85-264 V/AC, 88-375V DC
• 1 phase
• Output: 12V DC 4.5A 54W
• Switched Mode
• Termination type: Screw terminals
• Manufacturer's part ML60.121

This MiniLine power supply from PULS covers lower power requirements and is equipped with rugged plastic housing, both highly efficient and compact. The supply takes just seconds to install and offers superb reliability. Features include: spring-loaded connecting terminals, robust plastic housing and worldwide approvals (UL, EN, CSA, CB Scheme) for industry and office/home.

• Input voltage range: 115/230 V AC, 220-375V DC
• 1 phase
• Output: 24V DC 3A 72W
• Switched Mode
• Termination type: Spring cage terminal
• Dimensions 45 x 75 x 91mm
• Manufacturer's part ML70.100

This protection module from PULS fulfills two basic functions. First it distributes the current of a large power source to four lower current output channels and therefore allows for smaller wires to be used. The second function is to permit only so much current on the outputs that the input voltage of this unit (which corresponds to the output voltage of the power supply) does not fall below 21V. This ensures a safe and an uninterrupted supply voltage for sensitive equipments, such as PLCs, controls or sensors, when they are connected directly to the same power supply as the PISA module. Less critical loads that are not affected to short voltage interruptions, or could even be the cause of a fault on the 24V power supply, are connected to one of the four current controlled output channels of the PISA module.

• Single 24V DC input with 4 current controlled outputs (2 x 3A, 2 x 6A)
• Each output with on/off function
• Remote monitoring and control
• Ensures sufficient supply voltage for critical loads even in the event of a fault
• Protects thin cables against overload
• Hassle-free turn-on of loads with large input capacitors
• NEC Class 2 compliant (1A and 2A models)
• -25 to +70°C operating temperature range
• Compact 45mm width design
• 3-year Manufacturer's warranty
• Manufacturer's part PISA11.203206

This replacement battery from PULS is for the UBC10.241 power supply.

• Dimensions: 90 x 106 x 70mm (W x H x D)
• Weight: 2000g
• Manufacturer's part UZB12.051

This redundancy module from PULS has been manufactured to a high standard, with a compact design that is ideal for installation in an enclosure, and intended for general professional use such as in industrial control, office, communication, and instrumentation equipment.The PSU can be used to build 1+1 and N+1 redundant systems. It is equipped with two input channels, which can be connected to power supplies with up to 20A output current and one output, carrying nominal currents up to 40A.

One of the main features is the utilisation of mosfets instead of diodes for the decoupling of the two input channels. This reduces the heat generation and the voltage drop between input and output. The redundancy module does not require an additional auxiliary voltage.Due to the low power losses, the unit is very slender and only requires 36mm width on the DIN-rail.The YR40.242 unit comes with a manufacturer's three-year warranty and a large international approval package for a variety of applications, making it suitable for nearly every situation.

• Dual input with single output
• Suitable for all DIMENSION power supplies except QT20 and QTD20 Series
• Only 72mV voltage drop at 20A output current
• Only 1.7W loss at 20A and 5.9W at 40A output current
• 160% (65A) peak load capability
• Reverse input polarity protection
• Full power between -40°C and +60°C
• Width only 36mm
• Rugged metal housing
• Easy wiring: distribution terminal for negative pole included
• Large connection terminals allow for a safe and fast installation
• Manufacturer's part YR40.242

Mounting rails for Dimension power supplies and other units on the wall or panel, without using a DIN rail.

• Compatible with: PULSE DIMENSION-series QS5.
• Specification: Wall mounting rail ZM12.SIDE
• 145 x 65 x 44mm (W x H x D)
• Manufacturer's part ZM12.SIDE

Mounting rails for Dimension power supplies and other units on the wall or panel, without using a DIN rail.

• Compatible with: PULSE DIMENSION-series QS10/CS10.
• Specification: Wall mounting rail ZM13.SIDE
• 145 x 65 x 63mm (W x H x D)
• Manufacturer's part ZM13.SIDE

The TracoPower TPC 030-124 is an Industrial DIN Rail Power Supply from the TPC 030 Series. This is a lightweight power supply has an excellent price/performance ratio, consuming sparse standby power. The power supply operates with high efficiency to comply with the requirements of the European Ecodesign directive.

The power supply has a universal input of 85-264VAC or 90-375VDC, and is designed for Class I operation in industrial and residential environments, and provides a very reliable true redundant DC supply.

• For industrial, office and residential environments
• Meets European ErP directive (green mode), <0.3W no load power consumption
• High efficiency across full load range
• Compact plastic casing
• Reliable snap-on mounting on DIN-rails or with wall mounting bracket (not included)
• Universal input 85 to 264VAC, 47 to 63Hz
• Output voltage adjustable
• Power good signal
• Low ripple and noise
• Overload and short-circuit protection
• Optional module for parallel and redundant operation
• Worldwide safety approval package
• 3-year product warranty
• Supplied with an Output Power of 30W
• Supplied with an Output Voltage of 24VDC output
• Manufacturer's part: TracoPower TPC 030-124

The TracoPower TPC 055-124 is an Industrial DIN Rail Power Supply from the TPC 055 series. This lightweight DIN Rail power supply has an excellent price/performance ratio, consuming sparse standby power. It operates with high efficiency to comply with the requirements of the European Ecodesign directive.

The power supply has a universal input of 85 to 264VAC or 90 to 375VDC, and has been designed for Class I operation in industrial and residential environments, and will provide a very reliable true redundant DC supply.

• For industrial, office and residential environments
• Meets European ErP directive (green mode), <0.3W no load power consumption
• High efficiency across full load range
• Compact plastic casing
• Reliable snap-on mounting on DIN-rails or with wall mounting bracket (not included)
• Universal input 85 to 264VAC, 47 to 63Hz
• Output voltage adjustable
• Power good signal
• Low ripple and noise
• Overload and short-circuit protection
• Optional module for parallel and redundant operation
• Worldwide safety approval package
• 3-year product warranty
• Supplied with an Output Current of 2.3A
• Supplied with an Output Voltage of 24VDC output
• Manufacturer's part: TracoPower TPC 055-124

The TracoPower TPC 080-124 is an Industrial DIN Rail Power Supply that has an excellent price/performance ratio, consuming sparse standby power. It operates with high efficiency to comply with the requirements of the European Ecodesign directive.

The power supply has a universal input of 85 to 264VAC or 90 to 375VDC, and has been designed for Class I operation in industrial and residential environments, and will provide a very reliable true redundant DC supply.

• For industrial, office and residential environments
• Meets European ErP directive (green mode), <0.3W no load power consumption
• High efficiency across full load range
• Compact plastic casing
• Reliable snap-on mounting on DIN-rails or with wall mounting bracket (not included)
• Universal input 85 to 264VAC, 47 to 63Hz
• Output voltage adjustable
• Power good signal
• Low ripple and noise
• Overload and short-circuit protection
• Optional module for parallel and redundant operation
• Worldwide safety approval package
• 3-year product warranty
• Supplied with an Output Current of 3.3A
• Supplied with an Output Voltage of 24VDC
• Manufacturer's part: TracoPower TPC 080-1124

The TracoPower TPC 120-124 is an Industrial DIN Rail Power Supply that has an excellent price/performance ratio, consuming sparse standby power. It operates with high efficiency to comply with the requirements of the European Ecodesign directive.

The power supply has a universal input of 85 to 264VAC or 90 to 375VDC, and has been designed for Class I operation in industrial and residential environments, and will provide a very reliable true redundant DC supply.

• For industrial, office and residential environments
• Meets European ErP directive (green mode), <0.3W no load power consumption
• High efficiency across full load range
• Compact plastic casing
• Reliable snap-on mounting on DIN-rails or with wall mounting bracket (not included)
• Universal input 85 to 264VAC, 47 to 63Hz
• Output voltage adjustable
• Power good signal
• Low ripple and noise
• Overload and short-circuit protection
• Optional module for parallel and redundant operation
• Worldwide safety approval package
• 3-year product warranty
• Supplied with an Output Current of 5.0A
• Supplied with an Output Voltage of 24VDC output
• Manufacturer's part: TracoPower TPC 120-124