1.5mm side looking infrared emitting diode with a water clear lens. Through hole mount, high power output. Mechanically and spectrally matched to the L-610MP4BT/BD Phototransistor.

• Cathode short leg
• Kingbright type KM-4457F3C

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

A 3mm infrared emitting diode with a water clear lens. Mechanically and spectrally matched to the phototransistor.

• Through hole mount
• GaAs emitting colour material

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

A 3mm infrared sensor with a water clear lens- mechanically and spectrally matched to the L-34 series of infrared LED lamps.

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

This 940nm IR LED comes in a T-1 standard 3mm through-hole package. Mechanically and spectrally matched to the phototransistor (55-9203).

• Water clear lens
• Made with Gallium Arsenide

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

This IR phototransistor is mechanically and spectrally matched to the Kingbright range of IR LEDs.

• Made with NPN silicon phototransistor chips

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

T1 3/4 1.2V infrared emitting diode with a blue lens. Through hole mount. Mechanically and spectrally matched to the L-7113P3C phototransistor..

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

This IR LED comes in a T-1 3/4 standard 5mm through-hole package. The device is spectrally matched to the phtotransistor (55-9203).

• Water clear lens
• Made with Gallium Arsenide

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

NPN Silicon 5mm phototransistor with a radial case and water clear lens. Mechanically and spectrally matched to the L-7113F3BT infrared emitting diode.

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

This IR LED comes in a T-1 3/4 standard 5mm through-hole package. The device is spectrally matched to the phtotransistor (55-9203).

• Water clear lens
• Made with Gallium Aluminium Arsenide

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

A T-1 (3mm) infra red LED that is spectrally and mechanically matched to a complementary IR phototransistor (58-2005).

• Blue transparent lenses
• Viewing angle 34°
• Operating temperature -40°C to 85°C
• Readily interfaced with logic
• Cathode identified by flat on body
• Kingbright L-93 Series

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

A T-1 (3mm) infra red phototransistor that is spectrally and mechanically matched to an infra red LED (58-2006).

• Blue transparent lenses
• Operating temperature -40°C to 85°C
• Readily interfaced with logic
• Cathode identified by flat on body
• Kingbright L-93 Series

Rapid Electronics are Kingbright''s leading UK distributor of LEDs. To find out more about the full range of Kingbright products please visit Rapid''s Kingbright page.

A T1 3/4 (5mm) unfiltered PIN photodiode especially suitable for applications from 400nm to 1100nm. Suitable for use with industrial electronics, photo interrupters, fibre optic transmission systems and control and drive circuits.

• High speed PIN photodiode
• Housed in standard T1¾ (5mm) plastic packages

A Silicon PIN photodiode in a through-hole mounting package. Suitable for applications such as high speed photointerrupters, industrial electronics, control and drive circuits.

• 5mm LED T1 plastic package
• Fast switching time

Miniaturised receivers for infra-red remote control systems.

• PIN diode and pre-amplifier are assembled on lead frame, the epoxy package is designed as IR filter
• Demodulated output signal can directly be decoded by a microprocessor
• Highly reliable
• No external parts, inner shield
• Highly sensitive
• Long transmission range
• High immunity against ambient light, power noise and electromagnetic interference
• Low power consumption
• TTL and CMOS compatibility

This LED radiates in the infrared spectrum and has high radiant power. The device is suitable for IR type applications such as: IrDA, encoders, data communications and IR camers.

• High radiant power
• 5mm Standard directivity
• Superior weather resistance
• UV Resistant epoxy
• Water clear lens
• Narrow 15° beam angle

This oval beam pattern LED radiates in the infrared spectrum and has high radiant power. The device is suitable for IR type applications such as: IrDA, encoders, data communications and IR cameras.

• High radiant power
• 5.0 x 4.1mm Standard directivity
• Superior weather resistance
• UV Resistant epoxy
• Water clear lens
• 55° x 30° beam angle

A PIN photo diode encapsulated in an economical plastic package.

• High speed PIN photo diode with high sensitivity
• Low junction capacitance
• Housed in a black infra-red transmissive epoxy moulding

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.

This reflective sensor contains an infrared emitter and phototransistor in a leaded plastic package designed to exclude visible light. The specification and feature set of this optical sensor makes it ideal for line tracking and following and also suitable for applications such as position sensor for shaft encoder, detection of reflective materials, limit switch for mechanical motion, etc.

• Standard lead version
• Peak operating distance 2.5mm
• Operating range 0.2 to 15mm
• Typical output current 1mA
• Daylight blocking filter
• Emitter wavelength 950nm
• Dimensions 10.2 x 5.8 x 7mm
• Package includes 2x mounting clips

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.

This reflective sensor contains an infrared emitter and phototransistor in a leaded plastic package designed to exclude visible light. The specification and feature set of this optical sensor makes it ideal for line tracking and following and also suitable for applications such as position sensor for shaft encoder, detection of reflective materials, limit switch for mechanical motion, etc.

• Long lead version
• Peak operating distance 2.5mm
• Operating range 0.2 to 15mm
• Typical output current 1mA
• Daylight blocking filter
• Emitter wavelength 950nm
• Dimensions 10.2 x 5.8 x 7mm
• Package includes 2x mounting clips

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.

A high efficiency infrared emitting diode that is designed with GaAlAs on GaAs technology. The diode comes in a 5mm T-1¾ package with a clear, blue-grey tinted lens. In comparison with standard GaAs on GaAs technology this emitter achieves more than 100% improvement in radiant power output at a similar wavelength. The emitter has good spectral matching with Vishay TSOP IR receiver modules and is also ideal as a replacement for other standard emitters. Typical applications include IR remote controls with high power requirements, free air transmission systems, IR source for optical counters and card readers, IR source for smoke detectors, etc.

• IR transmitter diode for TSOP module 940 nm
• Extra high power and radiant intensity
• High reliability
• Low forward voltage
• Suitable for high pulse current operation

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.

A miniaturised infrared receiver module with a carrier frequency of 33kHz that has been designed for remote control systems. A PIN diode and a preamplfier are assembled on a lead frame with the epoxy package acting as an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. The module is optimised to suppress most spurious pulses from energy saving lamps such as CFLs.

• Package dimensions 10 x 12.5 x 5.8mm
• Very low supply currrent
• Internal filter for PCM frequency
• Improved shielding against EMI
• Insensitive to supply voltage ripple and noise
• Daylight-insensitive
• TTL and CMOS-compatible
• Low power requirement
• High fault protection

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.

A miniaturised infrared receiver module with a carrier frequency of 40kHz that has been designed for remote control systems. A PIN diode and a preamplfier are assembled on a lead frame with the epoxy package acting as an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. The module is optimised to suppress most spurious pulses from energy saving lamps such as CFLs.

• Package dimensions 10 x 12.5 x 5.8mm
• Very low supply currrent
• Internal filter for PCM frequency
• Improved shielding against EMI
• Insensitive to supply voltage ripple and noise
• Daylight-insensitive
• TTL and CMOS-compatible
• Low power requirement
• High fault protection

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.

A miniaturised infrared receiver module with a carrier frequency of 33kHz that has been designed for remote control systems. A PIN diode and a preamplfier are assembled on a lead frame with the epoxy package acting as an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. The module is optimised to suppress most spurious pulses from energy saving lamps such as CFLs.

• Package dimensions 6 x 6.95 x 5.6mm
• Very low supply currrent
• Internal filter for PCM frequency
• Improved shielding against EMI
• Insensitive to supply voltage ripple and noise
• Daylight-insensitive
• TTL and CMOS-compatible
• Low power requirement
• High fault protection

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.

A miniaturised infrared receiver module with a carrier frequency of 36kHz that has been designed for remote control systems. A PIN diode and a preamplfier are assembled on a lead frame with the epoxy package acting as an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. The module is optimised to suppress most spurious pulses from energy saving lamps such as CFLs.

• Package dimensions 6 x 6.95 x 5.6mm
• Very low supply currrent
• Internal filter for PCM frequency
• Improved shielding against EMI
• Insensitive to supply voltage ripple and noise
• Daylight-insensitive
• TTL and CMOS-compatible
• Low power requirement
• High fault protection

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.

This device is a miniaturised receiver for infrared remote control systems. A PIN diode and preamplifier are mounted on the lead frame and the epoxy package is utilised as an IR filter. The demodulated output signal can directly be decoded by a microprocessor. Deisgned for use in infrared PCM remote control systems.

To find out more about our range of Vishay resistors, diodes, capacitors and switches, please visit our Vishay brand page.