This Masterplug Metal Clad Light Switch has been designed to perform at 10AX inductive loads. Manufactured in heavy gauge steel and finished with a scratch resistant epoxy powder-coating. Flat profile with rounded edges, colour coded terminals with backed out captive screws for ease of installation.

Suitable for everyday use in a garage, shed, commercial and industrial environments.

1 x Masterplug Metal Clad 2-Way 1-Gang Light Switch

This Masterplug Metal Clad Light Switch has been designed to perform at 10AX inductive loads. Manufactured in heavy gauge steel and finished with a scratch resistant epoxy powder-coating. Flat profile with rounded edges, colour coded terminals with backed out captive screws for ease of installation.

Suitable for everyday use in a garage, shed, commercial and industrial environments.

1 x Masterplug Metal Clad 2-Way 2-Gang Light Switch

A stylish white ceiling rose from MK's Logic Plus Series.

• Simple wiring
• Quick and easy to install
• Four terminals: line, neutral, loop-in and earth
• Incorporates tunnel type terminals and knockouts
• Accommodates 3x 2.5mm² cables
• Transparent terminal block and equal length wire stripping
• Pre-cut aperture and clear markings for ease of installation
• Terminal layout allows cables to be cut to the same length
• Suitable for fittings of up to 5kg
• Heavy fittings must be installed using independent support e.g. ceiling hook
• Suitable for mounting over circular conduit boxes
• Colour white
• Diameter 84mm, depth 34mm (Cover)
• BS.3676: 1987 approved

This connection unit is ideal for domestic and commercial use.

• Supplied without neon indicator
• Flush fitting

This connection unit is ideal for domestic and commercial use.

• Supplied with neon indicator
• Flush fitting

White architrave single gang switch from the MK Logic Plus Series, ideal for fitting to door frames and for other uses where space is at a premium. This switch can be wired as either 1-way or 2-way.

• 250V AC 50Hz 10A
• Flush mounting
• Switches do not have to be derated when used with fluorescent or inductive loads
• BS.3676 Pt.1: 1989 approved
• Manufacturer's part K4841 WHI

Heavy duty double pole cooker control switch with neon indicator from the MK Logic Plus Series.

• Ideal for cookers and high power applications etc.
• Cooker switch 250V AC 50Hz, 45A
• Socket 250V AC 50Hz, 13A
• Flush mounting
• 120.6mm fixing centre
• On/Off clearly marked
• Suitable for domestic and commercial use
• Requires 25mm back boxes 145(W) x 85.7(H)mm
• Finished in white
• Supplied with fixing screws
• BS3676 and CE approved
• Manufacturer's part K5215CKWHI

This 1-way white moulded plate switch is from the Lisse family of wiring accessories. The switch is rated for use with fluorescent and inductive loads as well as standard loads (AX). The switch is a perfect blend of style and performance and is ideally suited to new construction and refurbishment projects. A high level of quality, reliability and value ensure a long life.

• Supplied in display packaging
• Future-proofed design
• Made from antimicrobial material
• Angled terminals for easier access
• Minimum back projection frees up space in the back box
• Large plate footprint
• Screw cap covers for a sleek finish
• 7mm raised edge profile
• M3.5 x 18mm fixing screws
• Conforms to BS 1363
• Requires 16mm deep mounting box

This 2-way white moulded plate switch is from the Lisse family of wiring accessories. The switch is rated for use with fluorescent and inductive loads as well as standard loads (AX). The switch is a perfect blend of style and performance and is ideally suited to new construction and refurbishment projects. A high level of quality, reliability and value ensure a long life.

• Supplied in display packaging
• Future-proofed design
• Made from antimicrobial material
• Angled terminals for easier access
• Minimum back projection frees up space in the back box
• Large plate footprint
• Screw cap covers for a sleek finish
• 7mm raised edge profile
• M3.5 x 18mm fixing screws
• Conforms to BS 1363
• Requires 16mm deep mounting box

A 2-gang, white rocker-style plate switch with 2-way contacts rated at 10A.

• 2-gang, 2-way
• Size 87 x 87mm
• Depth 24mm
• Range: Lisse
• Manufacturer's type GGBL1022

Single gang 10A, 250V plate switch to BS3676.

• Supplied complete with M3 mounting screws
• Available in white
• Fits standard wall boxes
• Dimensions 86 x 86 x 9mm excluding rocker
• Covered by manufacturer's 10 year warranty

SMJ Traditional profile single or double light switch made from white plastic. Suitable for interior use.

Fixings supplied.

This SMJ 1-Gang Light Switch is ideal for controlling 1 circuit.

Supplied in a Trade Pack.

SMJ Traditional profile single or double light switch made from white plastic. Suitable for interior use.

Fixings supplied.

This SMJ 1-Gang Light Switch is ideal for controlling 1 circuit. 2-Way switch, make it possible to control the same light from 2 locations.

Supplied in a Trade Pack.

Ceiling Switches that are suitable for use in bathrooms and shower rooms etc. They have a traditional pull cord that can be easily adjusted for length.

6 amp 1-Way switch trade packaging.