Buy Flaw Detector 1 Cleaner Spray 400ml from Ambersil - a fast drying, powerful degreasing solvent blend free of 1,1,1-trichloroethane or other chlorinated solvents for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid penetrant inspection and to remove all visible, coloured traces of the penetrant.

• Quickly dissolves grease, oil, lubricants, tar and adhesives
• Effective wash-away of contaminants and coloured penetrant
• Fast evaporation to minimize downtime
• Leaves no residue
• Stable, non-staining and non-corrosive
• Safe on most plastics, coatings and rubbers (test prior to use)
• RCC-M Tome III Chap. MC4200, ASME Code Section V
• Ambersil type PAI3

Buy Flaw Detector 2 Penetrant Spray 400ml from Ambersil - a water-washable liquid penetrant easily visible under natural white light.

• Detects cracks, lack of fusion, and open cavities in welded parts
• Finds cracks and cavities caused by metal fatigue and cutting operations
• Checks for porosity or leaks in pipes, tanks, boilers, heat exchangers
• Identifies discontinuities, folds and cracks in castings, forgings and ceramics
• RCC-M Tome III Chap. MC4200, ASME Code Section V
• Ambersil type PAI3

Flaw Detector Developer is a dispersion of a white powder in a fast evaporating solvent, giving a high contrast visual reference when used with bright red penetrant.

• 400ml aerosol

Ambersil Leak Detector has a unique water-based formulation. It has been developed, without the use of harmful solvents, silicones or oils, to allow the safe and easy detection of all gas and air leaks. When applied, bubbles will appear at the precise location of the leak.

• Shows all leaks even under low pressure
• Invaluable in the gas, plumbing, heating, automotive, offshore, engineering and welding industries
• Ideal for QC tests, maintenance and safety checks on: pipework joints, valves, couplings, air lines, cylinders, air brakes, regulators, screw connections, exhaust systems, compressors, welding seams, inflatable equipment, etc.
• Ambersil type 31633-AA

This freezer spray from Ambersil is a rapid cooling agent ideal for locating faults in electronic components. It can also be used for cooling thermally sensitive parts during soldering or calibration processes.

Suitable for instant fault finding on electronic equipment such as printed circuit boards, transistors, resistors and condensers. Ambersil freezer spray should be sprayed directly onto the suspect component. If the fault disappears this confirms the component is defective and should be replaced.

This spray can also be used for shrink fitting metal assemblies and for making hard sticky substances such as chewing gum to facilitate removal.

• Formulated without the use of any CFCs or HCFCs
• Gas at room temperature
• Produces a temporary frosted finish
• Slight ethereal odour
• Supplied in aerosol of 400ml
• Manufacturer's part 33182-AA

Electrolube FRE400 Freezer Spray 400ml is a powerful non-corrosive refrigerant for use as a rapid and safe method of cooling small components, particularly in electrical and electronic equipment. It can also be used for the testing of thermostats and other thermosensitive components and to detect faulty soldered joints and overheating components.

Switch on and set up equipment so that the fault conditions caused by the 'dry' joint exist. Spray each joint in the circuit with the end of the extension tube approximately one inch from the joint. Spraying should continue until a layer of 'frost' appears on the joint, usually about 2 seconds. When the 'dry' joint is frozen, the fault condition will disappear but will return as the temperature of the joint returns to normal ambient. A similar procedure is adopted for tracing faulty components that are overheating.

• Cools rapidly down to at least -48°C: extension tube aids access to concealed components
• Prevents component damage due to overheating during soldering
• Non-flammable: can be used to find faulty solder joints and overheating components
• Compatible with most conformal coatings

Anti-Static Freezer Spray Minimal Charging 400ml from Electrolube - a specially formulated freezer spray containing additives which keep generated static voltages down to well below 100V, whilst still providing good frost formation down to at least –50°C.

• Ideal for heat-related fault diagnosis in computers and other static-sensitive equipment
• Electrolube part no. MCF400
• Supplied in ozone friendly 400ml aerosol

An extremely useful spray for the detection of thermal faults in equipment.

• Even the smallest of electronic components can be cooled off locally
• Completely non-toxic, non-flammable and will not attack components
• Will reduce temperature of components down to as low as –42°C
• The necessity of desoldering components is often removed as a sharp cooling shock will indicate the fault immediately
• Supplied in CFC free, ozone safe 200ml aerosol

This leak detector spray from Rocol is a specially formulated fluid designed specifically to identify even the smallest, positive pressure, gaseous leak on plastic and metallic pipework and fittings.

• Suitable for use with most positive pressure gas systems
• For use on pipework carrying natural gas and LPGSafe for use with refrigerant gases
• Non corrosive
• 360°C valve for use in difficult to reach areas
• Supplied in 300ml can
• Manufacturer's part 32030

Flawfinder from Rocol is a non-destructive inspection system designed to provide a fast and reliable method for the visual detection of cracks or flaws which would normally be unseen by the naked eye.

• Cuts through dirt, grease and grime
• Zero residue
• Prepares surface for non-destructive testing
• Supplied in 300ml spray
• Manufacturer's part 63125

This Flawfinder Developer from Rocol is an aerosol-applied white powder designed to draw the penetrant out of a flaw and to enhance the definition when used in conjunction with Flawfinder Dye Penetrant and Cleaner sprays.

• Highly absorbent white film for rapid results
• Highlights very fine cracks
• Sharp indication and geometry of defect to the naked eye
• Suitable for pressure testing and leak detection
• Supplied in 400ml spray
• Manufacturer's part 63135

This Flawfinder Dye Penetrant from Rocol is an aerosol applied red dye designed to penetrate the finest cracks and flaws to facilitate detection when used in conjunction with Flawfinder Developer and Cleaner sprays.

• Bright red even film
• Highly sensitive dye
• Water washable
• Supplied in 300ml can
• Manufacturer's part 63151

Flawfinder from Rocol is a non-destructive inspection system designed to provide a fast and reliable method for the visual detection of cracks or flaws which would normally be unseen by the naked eye. This Flawfinder testing kit (also known as PT inspection) includes the cleaner, penetrant and developer spray in a convenient carry pack.

• Ideal for the inspection of welded joints, castings and forgings
• Manufacturer's part 63181