Scotch-Weld™ DP6310NS is a non-sag two-component urethane adhesive from 3M™ suitable for bonding a variety of composites, plastics, metals and wood. This flexible adhesive has excellent elongation and stress strain properties for durable bonding of composite parts and multi-material assemblies.

With a 1:1 mix ratio, this green adhesive has a 10 minute open time and reaches handing strength in 45 minutes.

Please note: Mixing nozzles sold separately.

• Primerless on most surfaces
• Bonds most composites and dissimilar substrates
• Excellent water and humidity resistance
• Very good chemical resistance
• Cures at room temperature but can be accelerated with heat
• Supplied in Duo-Pak of 48.5ml
• Manufacturer's part 7100109829

Scotch-Weld™ DP8805NS is the standard low-odour two-part acrylic adhesive from 3M™. This non-sag toughened adhesive is ideal for a wide variety of industrial and commercial applications as it reaches structural strength twice as quickly as most other acrylic adhesives with a comparable open time.

With a 10:1 mix ratio and a 4-minute work life there is adequate time to position substrates prior to adhesion. Once fully cured DP8805NS will reach 1,000psi of overlap shear strength within about 9 minutes - half the time of similar adhesives.

• Low odour and non-flammable properties for a safer working environment
• Durable finished bond with excellent shear and high impact strength
• Bonds difficult surfaces such as powder coats and most plastics
• 18-month room temperature shelf life
• Green colour
• Supplied in dispenser of 45ml
• Manufacturer's part 7100098631

Scotch-Weld™ DP8810NS is a toughened low-odour two-part acrylic adhesive from 3M™. This non-sag adhesive is ideal for a wide variety of industrial and commercial applications as it reaches structural strength twice as quickly as most other acrylic adhesives with a comparable open time.

With a 10:1 mix ratio and a 10-minute work life there is plenty of time to position substrates prior to adhesion. Once fully cured DP8810NS will reach 1,000psi of overlap shear strength within about 21 minutes - far more efficiently than similar adhesives.

• Low odour and non-flammable properties for a safer working environment
• Durable finished bond with excellent shear, peel and high impact strength
• Bonds difficult surfaces such as powder coats and most plastics
• 18-month room temperature shelf life
• Green colour
• Supplied in dispenser of 45ml
• Manufacturer's part 7100097574

Scotch-Weld™ DP8010 is a two-part acrylic adhesive from 3M™ which has been formulated to bond low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation such as chemical etching or priming. Simply wipe the surfaces with isopropanol to remove mould release agents, dust etc.

This acrylic adhesive will also bond metals, ceramics, and wood and most other plastics.

• Slightly flexible when cured
• Resists many chemicals, water, humidity and corrosion
• Medium viscosity allows controlled dispensing
• 10 minute work life with 60 minute handling strength
• Strong adhesive can replace screws, rivets and welding
• Blue colour
• Supplied in 45ml cartridge
• Manufacturer's part 7100036717

Bostik Tensol 70 2-Part Acrylic Cement is a two-part catalyst cement which cures at ambient temperatures to produce high strength bonds with acrylic sheet and offers excellent weathering resistance.

• Ideal for face-to-face bonding (lamination)
• A 2-part, solvent-free, clear adhesive which produces a strong, clear bond that is durable in external applications
• Excellent gap filling properties mean that a water-tight join can be created with the right technique
• Supplied in a pack with 500g bottle plus catalyst
• Bostik type 620651

Bostik Tensol 12 Acrylic Cement is a single component cement which hardens due to solvent evaporation to produce a clear bond in cast acrylic sheets.

• Quickly and easily used direct from the bottle
• Excellent for edge bonding of acrylic sheet
• Offers good resistance to stress crazing, even on line-bent sections
• Produces high clarity, bubble-free bonds
• Supplied in a 550g bottle
• Bostik type 620803

Note: This product is only recommended for indoor use.

* Shelf life from date of manufacture-not date of purchase.

Electrolube TCOR has been designed to fill the gap between device and heat sink, thus reducing the thermal resistance of the junction. It is a single component, 100% solids, low odour silicone RTV which cures on exposure to atmospheric moisture. TCOR can be applied around components and power resistors to dissipate excess heat to heat sinks, avoiding potential overheating and subsequent failures. It can also be used as a low bond strength adhesive, sealant or gasketing compound.

• Higher bond strength than standard RTVs
• Combines adhesive properties with efficiency of heat dissipation
• Can be used as a sealant or thermal adhesive
• Properties ideal for the automotive market
• High thermal conductivity
• Ideal for applications requiring a higher viscosity product
• Very wide operating temperature range
• Single component, non-slump paste
• Supplied in 75ml syringe
• Electrolube type TCOR

Loctite AA 3494 is a clear, low yellowing, light-cured, universal, acrylic-based instant adhesive ideal for plastics and well suited to ceramics, glass and metals. It has a high, on-demand, curing speed.

• Single-part system
• Depth of cure >13mm
• Tack free time >30 seconds
• Fixturing time 8 seconds
• Shore hardness: D 65
• Very high viscosity 6,000 mPa/s
• Supplied in container of 25ml
• Manufacturer's part 1170169

Loctite AA 3525 is a clear, light-cured, acrylic-based adhesive that is toughened for high strength bonding. Although well suited to plastics and metals, it can also bond glass and ceramics. It offers low yellowing in a sunlit environment.

• Ideal for electric motor balancing applications
• Tack-free time 10 seconds
• Fixturing time 5 seconds
• Depth of cure >13mm
• Service temperature up to 140°C
• Supplied in 25ml container
• Manufacturer's part 1170171

Loctite AA 3491 cures in seconds, on exposure to ultraviolet radiation of 365nm, to form an impact-resistant bond which exhibits excellent resistance to prolonged humidity or water immersion. Typical applications include bonding, sealing and potting of glass to itself, or other materials, such as rough surfaced decorative glass, moulded glass tableware items and automotive lighting components.

• Colour: clear
• Viscosity 1,100 mPa.s
• Depth of cure 4mm
• Tack-free time* 15s
• Fixturing time** 12s
• Shore hardness: D 75
• Well suited for plastics
• Well suited for metals
• Suited for ceramics
• Well suited for glass
• Service temperature range: -40 to +130°C
• Supplied in a 25ml pack
• Loctite type AA 3491

*Cured with Loctite 97055, 100mW/cm² at 365nm

**Irradiated with 6mW at 365nm

Loctite AA 3526 is a translucent straw to amber-coloured single-part liquid modified acrylic adhesive. It cures rapidly to form flexible, transparent bonds when exposed to ultraviolet light and/or visible light of sufficient irradiance. The secondary cure system permits the cure of product in shadowed areas.

• Excellent adhesion to a wide variety of substrates including glass, plastics and metals
• Medium viscosity
• UV/visible light-cured
• Supplied in container of 25ml
• Manufacturer's part 1170630

This kit from Loctite includes a 50ml container of AA F246 adhesive together with a 5ml bottle of Ini5 activator. Loctite AA F246 is a straw yellow to brown, toughened, high viscosity, high strength, modified methacrylate ester, liquid acrylic adhesive system designed for structural bonding. It cures rapidly at room temperature on assembly of the joint.

• High viscosity, high strength
• Cures rapidly at room temperature
• Manufacturer's part 1290612

Loctite AA 330 is a no-mix, pale-yellow, general purpose structural bonder which is ideal for bonding dissimilar substrates like PVC, phenolic and acrylic compounds. With medium to high viscosity, it has good impact resistance as well as a service temperature range up to +100°C.

• Good impact resistance
• Requires activator Loctite SF 7388 or Loctite SF 7386
• Supplied in cartridge of 315ml
• Manufacturer's part 135407

Loctite AA 3038 is designed primarily to bond e-coated metals (ECS) to glass-fibre filled polypropylenes (PPGF) but can also be used on other low energy substrates such as LDPE and HDPE. It is designed to work without surface pre-treatment and contains 0.25mm fillers for bondline thickness control. The thixotropic nature of Loctite AA 3038 reduces the migration of the liquid product after application.

• 2-part adhesive with pre-mixing nozzle
• Very good adhesion to polyolefin substrates (PP, PE)
• Good impact resistance
• Good adhesion to e-coated metals
• Fixture time: >40 minutes
• Service temperature range: Up to +100°C
• Shear strength (GBMS): 13 (PBT) N/mm²
• Supplied in a 50ml cartridge with mixing nozzle
• Loctite type AA 3038

Loctite AA 3295 is a green-coloured two-part, green general purpose structural bonding premix liquid suitable for bonding metals, ceramics and plastics. It has good impact resistance and a service temperature range up to +120°C.

• Good impact resistance
• Fixture time 5 to 10 minutes
• Does not require an activator
• Supplied in container of 50ml
• Manufacturer's part 142482

The Loctite Output Adhesive Kit includes the 315 Output Syringe (25ml) and 7386 Activator Bottle (18ml) - a thermally conductive kit for bonding components to equipment such as heat sinks.

• Cures rapidly at room temperature
• Typical applications include power transistors, processors, etc.
• High thermal conductivity provides excellent heat dissipation
• Electrically insulating
• Produces consistent 0.15mm gap
• Controlled strength permits repair
• Supplied as a pack containing 25ml syringe of 315 adhesive and 18ml bottle of 7386 activator

Loctite AA 330 is a no-mix, pale-yellow, general purpose structural bonder which is ideal for bonding dissimilar substrates like PVC, phenolic and acrylic compounds. With medium to high viscosity, it has good impact resistance as well as a service temperature range up to +100°C.

• Good impact resistance
• Requires activator Loctite SF 7388 or Loctite SF 7386
• Supplied in tube of 50ml
• Manufacturer's part 142572

Loctite AA 3321 is primarily designed for bonding rigid or flexible PVC to polycarbonate where large gap filling capabilities and flexible joints are desired. It has excellent adhesion to a wide variety of substrates including glass, many plastics and most metals. The thixotropic nature of Loctite 3321 reduces the migration of liquid product after application to the substrate.

• Colour: transparent, light yellow
• Viscosity in mPa.s: 5,500
• Depth of cure >13mm
• Tack free time* >30s
• Fixturing time** 12s
• Shore hardness: D 53
• Suitable for ceramics and glass
• Well suited for plastics and metals
• Service temperature range: -40 to +150°C
• Supplied in a 25ml pack
• Loctite type AA 3321

*Cured with Loctite 97055, 100mW/cm² at 365nm.

**Irradiated with 6mW at 365nm.

This 2-part methacrylate adhesive system from Loctite is formulated to provide fixturing strength within 20 to 25 minutes while requiring little or no surface preparation. This adhesive forms resilient bonds and maintains its strength over a wide range of temperatures.

• Highly thixotropic
• Cures at room temperature
• 1:1 mix ratio
• Non-sagging gaps filled to 0.375in
• Suitable for bonding a variety of substrates
• Superior impact and peel strength
• Offers excellent tolerance to off-ratio mixing
• Rapid room temperature cure
• Excellent environmental resistance
• Supplied in container of 50ml
• Manufacturer's part 2064879

Loctite AA 366 is a yellow to amber-coloured structural bonder for which typical applications include bonding ferrites to plated materials in electric motors, loudspeaker hardware and jewellery where fast fixturing is required and where product outside the bondline must be completely cured.

• High temperature resistance
• Good impact resistance
• Good humidity resistance
• Low viscosity
• Additional UV Cure
• Service temperature range up to +120°C
• Shear strength 13.5N/mm²
• Requires activator Loctite SF 7649 (available here)
• Supplied in 250ml container
• Manufacturer's part 229967

Loctite AA 330 is a no-mix, pale-yellow, general purpose structural bonder which is ideal for bonding dissimilar substrates like PVC, phenolic and acrylic compounds. With medium to high viscosity, it has good impact resistance as well as a service temperature range up to +100°C.

• Good impact resistance
• Supplied as kit including 50ml of adhesive and 40ml of activator
• Manufacturer's part 135407

Typical applications for Loctite 326 include bonding ferrite magnets to plated materials in electric motors, loudspeaker hardware and jewellery where fast fixing is required.

• Product for magnet bonding
• Medium viscosity (thixotropic)
• Good adhesion to different types of ferrites
• No mixing required
• Activator: Loctite 7649
• Fixture time: 3 minutes
• Service temperature range: Up to +120°C
• Shear strength (GBMS): 15 N/mm²
• Supplied in a 50ml applicator
• Loctite type AA 326

Loctite AA 350 is a transparent, light amber, medium viscosity, UV light-cured acrylic adhesive with good resistance to chemicals and high humidity which is suitable for bonding glass and metals and can also be used on plastics and ceramics.

• Cures on demand
• Resistant to humidity and chemicals
• Tack-free time 20 seconds
• Fixture time 15 seconds
• Depth of cure 4mm
• Service temperature range -40ºC to +120ºC
• Supplied in 250ml container
• Manufacturer's part 232767

Loctite AA 317 is a single part anaerobic urethane-based methacrylate adhesive suitable for a wide range of uses. It cures when confined in the absence of air between close fitting surfaces with the aid of an activator. Typical applications include bonding close fitting rigid parts of metal or ceramic.

• Ideal for bonding rigid, metal and ceramic parts
• Supplied in a 50ml container
• Manufacturer's part 237189

Loctite AA 350 is a transparent, light amber, medium viscosity, UV light-cured acrylic adhesive with good resistance to chemicals and high humidity which is suitable for bonding glass and metals and can also be used on plastics and ceramics.

• Cures on demand
• Resistant to humidity and chemicals
• Tack-free time 20 seconds
• Fixture time 15 seconds
• Depth of cure 4mm
• Service temperature range -40ºC to +120ºC
• Supplied in 50ml container
• Manufacturer's part 267423

Loctite AA 3342 is a yellow-opaque, high viscosity, no-mix structural bonder which has high temperature resistance, good impact resistance and good humidity resistance.

• Fixture time 3 to 3.5 minutes
• Service temperature range up to +180°C
• Tensile shear strength 15 to 30N/mm²
• Supplied in container of 300ml
• Manufacturer's part 537444

Note: Requires an activator.

Loctite AA 358 is an amber, single-part, medium viscosity, UV light-cured, urethane methacrylate ester acrylic adhesive. It is used to bond and seal glass to glass and glass to metal, for example in decorative glassware and jewellery.

• Suitable for gaps up to 0.5mm
• High speed curing
• Supplied in 50ml container
• Manufacturer's part 88491