Meter, mix and apply two-part adhesives and potting compounds with this 3M™ Scotch-Weld™ EPX™ 1:1 plunger. The plunger works with the 3M™ Scotch-Weld™ EPX Applicator and 50ml cartridges to precisely measure out your exact requirements for easy uniform application.

• Designed for use with 50ml 3M™ Scotch-Weld™ Duo-Pak cartridges
• Provides exact ratio of components
• Approved accessory for 3M™ Scotch-Weld™ EPX applicator

Meter, mix and apply two-part adhesives and potting compounds with this 3M™ Scotch-Weld™ EPX™ 10:1 Plunger. The plunger works with the 3M™ Scotch-Weld™ EPX Applicator and 50ml cartridges to precisely measure out your exact requirements for easy uniform application.

• Designed for use with 50ml 3M™ Scotch-Weld™ Duo-Pak cartridges
• Provides exact ratio of components
• Approved accessory for 3M™ Scotch-Weld™ EPX Applicator

The 3M™ Scotch-Weld™ EPX™ Dispenser is a manual applicator for dispensing EPX adhesives in 38, 45 and 50ml duo-pak cartridges It is supplied with standard plunger. A special plunger, available separately, is required when using 38ml cartridges.

• Dispenses 3M™ Scotch-Weld™ adhesives
• Suitable for use with 38*, 45 and 50ml duo-pak cartridges
• *Requires additional plunger
• 3M type 7000033012

The Loctite 1034026 dual cartridge manual applicator is a hand-held unit, made of impact-resistant plastic. It provides a convenient, cost-effective method of applying two-component adhesives and acrylics.

• Suitable for 10:1 mixing ratio cartridges
• Typical fluid handled: Loctite 3038 Polyolefin Bonder
• Loctite type 1034026

The Loctite 142240 300ml syringe dispenser is a hand-held, manually-operated dispensing tool that provides a convenient, cost-effective method of applying single-component adhesives, sealants, etc.

• Suitable for 300ml cartridges
• Typical fluids handled: elastic adhesives, sealants, e.g. silicone, silane modified polymers
• Loctite type 142240 (IDH 142240)

The Loctite 98815 30ml syringe dispenser is a hand-held, manually-operated dispensing tool that provides a convenient, cost-effective method of applying single-component adhesives.

• Suitable for 30ml cartridges
• Typical fluids handled: all, including acrylics and light-cure adhesives
• Loctite type 98815 (IDH 1544934)

The LOCTITE® Pro Pump Hand Held Dispenser is a bottle-mounted adhesive dispenser that can be used with 50ml or 250ml bottles of LOCTITE anaerobic adhesives creating a complete dispensing system.

This dispenser utilises patented progressive cavity pump technology that is specifically designed to dispense LOCTITE anaerobic threadlockers and retaining compounds.

The ergonomic design allows the user to deliver a drop of adhesive with a single pull of the trigger. The multi-position nozzle delivers adhesive in three different orientations, horizontal, 45° up and 45° down and can also be folded down 90° for storage.

The LOCTITE Pro Pump Hand Held Dispenser enables more accurate and consistent application while eliminating waste and mess.

• No assembly required
• Fits on both 50ml and 250ml LOCTITE® adhesive bottles
• Compatible with all LOCTITE anaerobic Threadlockers and Retaining Compounds
• Easy to setup and easy to use Eliminates spills, waste and mess
• Articulating nozzle with slip luer feature for dispense tips
• Can be used to apply to difficult to reach blind holes
• Provides precise drop placement
• Average dispense volume = 30 mg
• Manufacturer's part 2564842

The Loctite 96001 50ml dual cartridge applicator is a hand-held, manually-operated dispensing tool that provides a convenient, cost-effective method of applying two-component adhesives.

• Can be used for 1:1 and 2:1 mix ratio products
• Typical fluids handled: Loctite 2-component epoxies and acrylics packaged in 50ml twin cartridges or syringes
• Loctite type 96001 (IDH 267452)

The Loctite 983438 400/415ml dual cartridge applicator is a hand-held, manually-operated dispensing tool that provides a convenient, cost-effective method of applying two-component epoxy, acrylic, silicone and polyurethane adhesives and sealants.

• Can be used for 1:1 and 2:1 mix ratio products
• Typical fluids handled: Loctite 2-component epoxies and acrylics packaged in 400/415ml twin cartridges or syringes
• Loctite type 983438 (IDH 218312)

The Loctite 96005 50/80ml syringe dispenser is a hand-held, manually-operated dispensing tool that provides a convenient, cost-effective method of applying single-component adhesives, etc.

• Suitable for 50/80ml cartridges
• Typical fluids handled: elastic adhesives, sealants and gasket products
• Loctite type 96005 (IDH 363544)

The Loctite 98414 50ml volumetric hand pump is a manually operated peristaltic dispenser tool that provides a highly controllable and accurate method of applying anaerobic thread-lockers, thread sealants and retaining compounds supplied in 50ml bottles.

• Can be used for adhesives supplied in 50g bottles
• Typical fluids handled: anaerobic thread-lockers, thread sealants and retaining compounds
• Loctite type 98414 (IDH 608966)

The Loctite 97001 250ml volumetric hand pump is a manually operated peristaltic dispenser tool that provides a highly controllable and accurate method of applying anaerobic thread-lockers, thread sealants and retaining compounds supplied in 250ml bottles.

• Can be used for adhesives supplied in 250g bottles
• Typical fluids handled: anaerobic thread-lockers, thread sealants and retaining compounds
• Loctite type 97001 (IDH 88631)

An angled plunger rod for use with the Metcal 910-MSG manual syringe gun.

• Metcal type 71000ROD

An angled plunger rod for use with the Metcal 930-MSG manual syringe gun.

• Metcal type 73000ROD

Metcal's 910-MSG manual 10cc syringe gun is a lightweight barrel applicator gun that provides excellent control for medium/high viscosity products. It is easy to use and does not drip or produce mess.

• Manual syringe gun
• Capacity 10cc
• Lightweight barrel applicator gun
• Provides excellent control for medium/high viscosity products
• Easy to use
• No dripping or mess
• Plunger rod available separately
• Metcal type 910-MSG

Metcal's 930-MSG manual 30cc syringe gun is a lightweight barrel applicator gun that provides excellent control for medium/high viscosity products. It is easy to use and does not drip or produce mess.

• Manual syringe gun
• Capacity 30cc
• Lightweight barrel applicator gun
• Provides excellent control for medium/high viscosity products
• Easy to use
• No dripping or mess
• Plunger rod available separately
• Metcal type 930-MSG