SF20 is a low viscosity, modified ethyl cyanoacrylate based adhesive, formulated for bonding absorbent, porous or difficult to bond surfaces such as paper, wood or leather. It also offers ultra-high-speed bonding of plastics, rubbers and other common substrates.
Recommended for use on close-fitting parts and smooth, even surfaces
Cure speed can be increased by using AC11 activator, order code 87-0282
Scotch-Weld™ PR100 is a low viscosity instant adhesive from 3M™ which has been formulated to give exceptional performance on difficult-to-bond substrates, such as nylon, polypropylene and polyethylene with an appropriate primer. Once applied, the glue has a fast handling time and cure. This cyanoacrylate adhesive is dispensed from a flexible container - just pinch a precise drop or squeeze for a steady bead.
Low viscosity
Strong, durable and long lasting bond on a variety of substrates
Bison Professional Super Glue is a single-part, fast-curing, low viscosity cyanoacrylate adhesive for general purpose use on most synthetics, metal, rubber, porcelain, wood and cork.
Handling time: Approx. 10 seconds to 1 minute, depending on material
After 2-5 minutes glue joint is strong enough to be handled
Full bond strength after approx. 24 hours
Supplied in 7.5g non-clog bottles with child-proof safety cap
Not suitable for earthenware, PE, PP, PTFE and silicones.
Ultra-fast and extremely strong liquid super glue in a shockproof dispenser with easy grip system. Facilitates exact dosing drop-by-drop and is very easy and clean to handle. Dishwasher proof and water resistant.
Ideal for small-area bonds. Glues almost all solid and flexible materials like many plastics (such as rigid PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), and phenolic resins (Bakelite®)), porcelain, ceramics, leather, metal, wood, cork, felt, cloth (check suitability first), and rubber. Only partly suitable for glass (over a certain period of time the bond becomes brittle, causing it to weaken). Not suitable for PE, PP, silicone resins, PTFE, Styrofoam®, fabrics and leather clothing.
Bondloc B401 is a Medium Viscosity Cyanoacrylate. It bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials.
Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation.
Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding.
Bondloc B415 is a high viscosity Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials.
Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation.
Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding.
Bondloc B454 is a Thixotropic Non-Drip Gel Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials.
Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation.
Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding.
Bondloc B480 is a black rubber toughened Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials.
Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation.
Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding.
Bostik Super Glu Gel is a cyanoacrylate adhesive effective on a range of surfaces including china, metals and laminates. It has a Gel formulation for porous surfaces.
Bonds porcelain, many rubbers, most common metals, jewellery and most plastics
Medium viscosity cyanoacrylate adhesive designed for quick strong bonding of metals, plastic, wood, ceramics, rubber, leather, card, glass etc. Requires a clean surface on which to bond. Display packed.
Medium viscosity formula fills gaps to 0.1mm. For use on perfect fit surfaces where fast set is required. Bonds non porous surfaces eg most plastics, metals, glass, PVCu, rubber and EPDM. Viscosity at 25°c - 100cps. Set time 5 to 15 seconds. Packed in self merchandising display boxes.
Medium viscosity formula fills gaps to 0.1mm. For use on perfect fit surfaces where fast set is required. Bonds non porous surfaces eg most plastics, metals, glass, PVCu, rubber and EPDM. Viscosity at 25°c - 100cps. Set time 5 to 15 seconds. Packed in self merchandising display boxes.
High viscosity formula for porous and non porous substrates where a slightly delayed set is required. For use on MDF, rubber, metals, PVCu and plastics. Viscosity at 25°C - 1500 cps. Set time 10 to 30 seconds. Packed in self merchandising display boxes.
High viscosity formula for porous and non porous substrates where a slightly delayed set is required. For use on MDF, rubber, metals, PVCu and plastics. Viscosity at 25°C - 1500 cps. Set time 10 to 30 seconds. Packed in self merchandising display boxes.
Mitre Fast Bonding Kit is a two part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator. Mitre Fast is mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives. Also suitable for bonding of MDF, rubber, PVCu, metals etc. Now also available in an industrial shrink-wrapped pack.
Mitre Fast Bonding Kit is a two part instant adhesive system comprising a cyanoacrylate adhesive and aerosol activator. Mitre Fast is mainly used in the furniture, timber, kitchen and plastics industries where its instant bonding properties dramatically reduce assembly times for mitre joints when compared to conventional wood adhesives. Also suitable for bonding of MDF, rubber, PVCu, metals etc. Now also available in an industrial shrink-wrapped pack.
Stick 2 Superglue Gel will bond most common materials. The high viscosity formula is ideal for non-drip, vertical, porus or small gap filling applications.
Stick 2 All Purpose Superglue Tube fills gaps up to 0.1mm and bonds non-porous surfaces such as plastics, metals, PVCu, rubber, ceramics and much more. 1 minute instant bond.
Stick 2 All Purpose Superglue fills gaps up to 0.1mm and is perfect where a fast set is required. Bonds non-porous surfaces such as plastics, metals. PVCu, rubber, ceramics and much more.
You can use this 2-part adhesive from Evo-Stik to bond mitre corners and repairs on a variety of materials including wood, plastics and rubber. This adhesive will provide clean and accurate joints without requiring clamping.
Pack contains 50g of adhesive and 200ml of brushable activator
These 2 x 3g tubes of Gorilla Superglue are perfectly named – for it is the king of the adhesive jungle, the strongest, most powerful household glue on the market. Gorilla Superglue handles the toughest jobs in and around the home, bonding wood, stone, metal, ceramics, foam and glass.
Just hold in place for 30-60 seconds while the formula sets, no clamping necessary. Once applied, Gorilla Superglue expands during curing, and once set is paintable and stainable.
This 15g tube of Gorilla Superglue is perfectly named – for it is the king of the adhesive jungle, the strongest, most powerful household glue on the market. Gorilla Superglue handles the toughest jobs in and around the home, bonding wood, stone, metal, ceramics, foam and glass.
Just hold in place for 30-60 seconds while the formula sets, no clamping necessary. Once applied, Gorilla Superglue expands during curing, and once set is paintable and stainable.
This 3g tube of Gorilla Superglue is perfectly named – for it is the king of the adhesive jungle, the strongest, most powerful household glue on the market. Gorilla Superglue handles the toughest jobs in and around the home, bonding wood, stone, metal, ceramics, foam and glass.
Just hold in place for 30-60 seconds while the formula sets, no clamping necessary. Once applied, Gorilla Superglue expands during curing, and once set is paintable and stainable.
Gorilla Superglue Gel has a non-run control gel formula, allowing controlled application and making it ideal for use on vertical surfaces. The glue bonds in 10 seconds and is impact-tough.
Gorilla Superglue has a fine bristled brush for controlled coverage with less mess. Precision tip nozzle for quick, easy dispensing. Its high strength and quick set-time make it the go-to for a variety of household projects.
Developed for long-lasting repairs in an instant, dries in 10–30 seconds and is Impact-Tough® reinforced with rubber for increased impact resistance. It has an anti-clog cap with a metal pin inside to ensure an airtight seal for maximum reusability.
Gorilla Superglue Gel has a non-run control gel formula, allowing controlled application and making it ideal for use on vertical surfaces. The glue bonds in 10 seconds and is impact-tough.
Gorilla Superglue Micro Precise keeps holding strong, even when the bond takes a hit. Just hold in place for 10-45 seconds whilst the formula sets, no clamping necessary. It has an anti-clog cap that provides precise application exactly where you need it.
Suitable for use on nearly anything: wood, metal, ceramics, some plastics, rubber and much more.
Transparent, colourless ethyl-based instant adhesive gel from Loctite, suitable for plastics and polyolefins in combination with a primer. Can also be used for rubbers and metals.
Loctite 499 is a translucent, colourless, single-part, high viscosity, moisture-cured, ethyl cyanoacrylate adhesive gel. It is a general-purpose adhesive suitable for applications where heat resistance is required and has been formulated to resist thermal cycling. It also exhibits superior resistance to humidity.
Loctite 3090 is a two-component, fast curing, gap-filling adhesive with excellent bonding characteristics to a variety of substrates including plastics, rubbers and metals. It is designed for the assembly of parts with varying or undefined bond gaps up to 5mm (0.2in.), or for applications where complete cure of excess adhesive is a requirement. The gel consistency prevents adhesive flow even on vertical surfaces.
Loctite 3090 is also suited for bonding porous materials such as wood, paper, leather and fabric.
Loctite 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. It offers exceptionally low viscosity and when combined with Loctite primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
Rapid bonding of plastic and rubber, including EPDM
Loctite 415 is a transparent, colourless, high viscosity, methyl-based instant adhesive. Well suited to metals and suitable for rubbers and plastic, it can also be used for polyolefins.
Cures very quickly when confined between two surfaces
Loctite 416 is a transparent, colourless, high viscosity, general purpose ethyl-based instant adhesive which is suitable for use with metals, rubbers and plastic. It can also be used with polyolefins if used with a primer.
Cures very quickly when confined between two surfaces
Loctite 460 has low-odour and low-blooming properties and is particularly suitable for applications where vapour control is difficult. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. Loctite 460 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.
Loctite 460 has low-odour and low-blooming properties and is particularly suitable for applications where vapour control is difficult. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. Loctite 460 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.
Loctite 4204 is a general purpose adhesive suitable for applications where heat resistance is required. It is toughened with elastomers for flexibility, impact resistance and improved resistance to heat and humidity.
Fixture time: 10 to 30s
Colourless, transparent
Suited for plastics
Suited for polyolefines in combination with Loctite Primers 770 or 7239
Loctite 4090 is a two-component, general-purpose adhesive that provides a very fast fixture time at room temperature. It is designed to bond a variety of substrates including metals, most plastics and rubbers. Loctite 4090 provides good temperature and moisture resistance which also makes it suitable for applications in high temperature/humidity environments. Its thixotropic nature makes it suitable for applications where good gap filling properties on rough and poorly fitting surfaces are required.
Loctite 408 has low odour and low blooming properties and is particularly suitable for applications where vapour control is difficult. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. Loctite 408 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.
Fixture time: 5 to 10s
Colourless, transparent
Suitable for plastics, rubbers and metals
Suitable for polyolefines in combination with Loctite Primers 770 or 7239
Loctite 406 is an instant adhesive designed especially for the fast bonding of plastics and rubbers. It offers exceptionally low viscosity and when combined with Loctite primers for cyanoacrylates, it can also be used on difficult-to-bond plastics.
Rapid bonding of plastic and rubber, including EPDM
Loctite 403 is a low bloom, low odour, medium viscosity cyanoacrylate instant adhesive which is particularly suitable for applications where vapour control is difficult. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers.
Loctite 403 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.
Loctite 401 is designed for the assembly of difficult-to-bond materials which require uniform stress distribution and strong tension and/or shear strength. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers.
Loctite 401 is also suited for bonding porous materials such as wood, paper, leather and fabric.
Universal instant adhesive
Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics as well as most plastics)
Very high strength on close-fitting parts
Perfect for all quick repairs and all types of small emergency repairs
Loctite 4860 has been designed for the assembly of difficult to bond materials and is specifically formulated to provide flexible bondlines. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers.
When used to bond rubbers, for example, Loctite 4860 maintains the full compressibility of the joint. It is particularly suited for bonding porous or absorbent materials such as paper, leather and fabrics.
Fixture time: 3 to 10s
Colourless, transparent
Suited for plastics
Suited for polyolefines in combination with Loctite Primers 770 or 7239
Loctite 4850 is designed for the assembly of difficult to bond materials and is specifically formulated to provide flexible bond lines. It provides rapid bonding of a wide range of materials, including metals, plastics and elastomers. When used to bond rubbers for example, Loctite 4850 maintains the full compressibility of the joint. It is particularly suited for bonding porous or absorbent materials such as paper, leather and fabrics.
Instant, flexible adhesive
Low viscosity
Bonds a wide range of similar or dissimilar substrates (metals, rubber, wood, cardboard, ceramics as well as most plastics)
The Electronics in Meccano Circuits Shop is an affiliate of Rapid Electronics, and any purchases you make help support this website without affecting the price you pay! Any enquiries regarding products or order status should be directed to Rapid Electronics at www.rapidonline.com.