Re mount adhesive gives a temporary bond, often used in the design industry but also suitable for applications in the home and office like stencilling, posters, collages, etc.

• Easy re-positioning
• Suitable for lightweight materials such as paper card and fabrics
• Clear, non-staining
• Will not transfer
• Supplied in 400ml aerosols

3M Display Mount Adhesive is a maximum strength spray adhesive for permanent mounting and bonding.

• Ideal for exhibition boards and point-of-display boards
• Provides permanent bonding for many porous and non-porous materials, such as fabrics, heavy cardboard, wood, foam, and coated papers
• Fast drying spray provides instant hold combined with rapid strength build-up to form a strong, secure and permanent bond
• Supplied in a 400ml aerosol

Buy 3M Photo Mount Adhesive 400ml – a strong, permanent ozone-friendly aerosol adhesive, ideal for reproductions, illustrations, maps, posters and signs.

• Allows time for positioning before bonding takes place
• pH neutral, making it photo safe
• Will not show through, discolour, bleed or wrinkle
• Resists heat and moisture for more permanent bond
• Supplied in 400ml cans

3M™ Hi-Strength 90 Spray Adhesive is an all-around adhesive capable of forming extremely strong bonds on a wide array of materials, including paper, cardboard, fabric and insulation. It also works well with plastic, metal, wood and much more.

Its permanent bond provides fast results to keep projects moving ahead. The spray formula is easy to dispense, offering a variable-width spray pattern, and applies directly onto surfaces and materials where needed.

Hi-Strength 90 spray adhesive offers a high initial grab, sufficient bonding range and fast dry time. The high-solids content provides higher per square foot coverage than competing spray adhesives. The combination of maximum-strength bond and clean appearance make it ideal for projects of all kinds.

• Professional, industrial strength for demanding applications
• Fast, contact type adhesive
• Bonds laminate, wood, concrete, metal, plastic and more
• High temperature and moisture resistance
• Variable-width web spray pattern
• Applications:
• General maintenance and repairs
• Attaching fibreglass insulation and drywall corner beads
• Installing acoustic panels
• Bonding thin films, foils and fabrics
• Picture framing and mounting displays
• Ideal for crafts and hobbies
• 3M type high strength 90

You can adhere materials in seconds for display or in preparation for final assembly with Scotch-Weld™ 75 repositionable spray adhesive from 3M™. This versatile pressure sensitive spray adhesive is ideal for temporarily holding or positioning lightweight materials thanks to an extra-long tack range that permits lifting and repositioning of materials.

The low soak-in formula allows it to join delicate substrates without damaging the material. This spray adhesive dries clear, makes a smooth glue line and resists wrinkling on most materials for a clean appearance.

• Suitable for bonding paper, tissue, cardboard, acetate film, foils, fabrics, plastic sheeting, rubber, etc
• Supplied in a container of 500ml
• Manufacturer's part 7000116775

Foam Fast 74 from 3M™ is a fast-drying spray adhesive that permanently bonds foam and fabric to a wide range of substrates quickly and easily. The non-yellowing formula dispenses in a lace-spray pattern and applies directly onto surfaces and materials where needed.

Foam Fast 74 has an aggressive tack that offers a high initial grab with foam-tearing strength, yet allows sufficient open time to position materials properly. It also provides higher coverage than competing spray adhesives and helps create soft, non-dimpling glue lines.

• Provides professional, industrial strength for demanding applications
• Offers a fast, aggressive tack for a quick assembly of high-stress bonds
• Allows for a bond time of 15 seconds to 30 minutes
• Ideal for crafts and hobbies
• Supplied in a container of 500ml
• Manufacturer's part 7000116771

This non-chlorinated adhesive from Ambersil is perfect for fixing and bonding a wide range of materials. The product has been formulated without methylene chloride or other chlorinated solvents. Ideal for numerous applications in areas such as the foam converting, upholstery, carpet fitting and automotive industries. Quickly provides high-strength, permanent bonds on many different substrates, including: upholstery, carpets, flooring, paper, rubber, plastics, fabrics, foam, card, wood, metals, cork and felt.

• Appearance: clear, amber liquid
• Odour: acetone
• SG @ 25°C: 0.81
• Pressure @ 25°C: 3 Bar
• Discharge rate: Low setting - 0.9g/sec Medium setting - 1.1g/sec High setting - 1.3 g/sec
• Polymer type: Styrene butadiene rubber
• Open joint time: 1 to 10 minutes
• Bonding time: approximately 60 minutes; maximum adhesion in 12/24 hours
• Solubility: soluble in some solvents, insoluble in water
• Flammability: classified as extremely flammable under CHIP regulations
• Flashpoint: not applicable in sealed aerosol
• Packaging: 500ml aerosol
• Manufacturer's part 6190009000

A multipurpose fast drying, strong spray adhesive.

• Fast tack time
• Ideal for instant contact and bonding
• High strength, permanent bond
• Volume of spray is selectable by rotating aerosol nozzle
• Use on carpets, flooring, chipboard, concrete, canvas, leather, paper, cork, wood, metals, rubber and many plastics
• Ambersil type MP 100
• Supplied in 500ml aerosol

Bostik Fast Tak is a strong contact aerosol adhesive ideal for household repairs, craft and much more.

• Adhesive allows for some repositioning for better, more accurate results
• Ideal for use in DIY, household repairs, crafts and hobbies as well as upholstery and furniture
• Supplied in a 500ml aerosol
• Bostik type 80215

Suitable for applications where good initial strength is required. Effective on glass, rubber, wood, metals and most lightweight materials. CFC free. Sold loose.

Sprayable medium duty glue which fixes P.U. and foam backed carpets, carpet tiles, underlay, paper felt and cork to most common substrates. Economical and time saving. Foaming formula gives low soak into substrates.

Stick 2 Spray Contact Adhesive is a sprayable glue which bonds to most common materials including wood, concrete, stone, tiles, rubber, foam, metals, rigid plastics, polyethylene, canvas fabrics, cardboard, paper and cork. Ideal for securing most carpets/floor coverings. Suitable for internal and external use, giving permanent or temporary adhesion.

A general purpose spray adhesive suitable for indoor and outdoor applications. Easy to use and an ideal substitute for double sided tape. Ideal for fixing floorings, upholstery, fabric, foam, polythene, foils, loose lay materials, cardboard and many other materials.Not suitable for use on vinyl or for mounting photographs.Test before use on new applications or unfamiliar materials to confirm suitability before use. Each 500ml can cover an area of 60 sq ft approximately (medium setting). Non-chlorinated and CFC free.

PlastiKote Trade Permanent Spray Adhesive is suitable for bonding paper, cardboard, wood, textiles and various types of plastic. Provides permanent adhesion.

PlastiKote Trade Repositional Spray Adhesive is suitable for bonding paper, cardboard, wood, textiles and various types of plastic. Provides temporary adhesion.

Repairs and maintains most types of substrate and trim. Excellent for use on roof and trim lining, upholstery and backed carpet. Suitable for paper, card, fabric, foam and other similar materials or onto metals and ceramics, glass and wood.

• Repairs and maintains most types of substrate and trim.
• Excellent for use on roof and trim lining, upholstery and backed carpet.
• Suitable for paper, card, fabric, foam and other similar materials or onto metals and ceramics, glass and wood.
• Model No. SCS039S

The Tesa® 60022 Professional Spray Glue Extra Strong 500ml is an extra strong, film-forming glue for permanently bonding materials such as fabric, plastic, cardboard, foam rubber, insulating materials, vinyl, leather, faux leather and rubber to each other or to metal and wood.

The Tesa® 60020 Professional Permanent Spray Glue 300ml is a very versatile glue for permanently bonding materials such as paper, card-board, felt, fabric, film, wood, leather, polystyrene and many different plastics.

The Tesa® 60021 Professional Permanent Spray Glue 500ml is a very versatile glue for permanently bonding materials such as paper, card-board, felt, fabric, film, wood, leather, polystyrene and many different plastics.

An exceedingly strong adhesive in an aerosol for easy application.

• Very high initial tack
• Particularly suited for bonding foam to foam
• Also ideal for fabrics, wood, concrete, metal, plastic, rubber and polythene
• Laying foam backed carpets
• Securing under-felts
• Dust sealing concrete floors
• Fitting vehicle interior trimmings
• Fixing insulation materials
• Supplied in a 500ml aerosol