The Ansmann ALCS 2-12/0.4 is a Lead Acid Battery Charger for 2V, 6V and 12V batteries. The compact and lightweight charger is ideal for cars, boats, motorcycles, scooters, wheeled garden equipment or children's vehicles.
The LED indicators of the charger clearly show the charge progress and lets you know when the battery is ready. The charger can be left connected without fear of overcharging making it a great choice for vehicles that are stored over winter, or for keeping emergency backup batteries charged and ready for use. A long cable of 3.5m is particularly handy and allows charges without an extension cord.
Lead acid charger for 2V, 6V and 12V lead acid, SLA batteries
With 3.5m charging cable
Protection against short-circuit, wrong polarity and overcharge
Suitable for standby and parallel charging mode
Charging according to IU characteristic
Automatic recharge, if the battery is left connected to the charger
Ideal maintenance of lead acid batteries during winter time saves deep discharge
Battery charging capacity: 1.2Ah to 40Ah
Weight: only 135g due to modern switch mode power supply technology
The Ansmann ALCT 6-24/2 UK is a Lead Acid Battery Charger for 6V, 12V and 24V batteries. The 2A compact and lightweight charger is ideal for HGV's, cars, boats, motorcycles, scooters, wheeled garden equipment or children's vehicles.
The LED indicators of the charger clearly show the charge progress and lets you know when the battery is ready.
This high quality lead acid battery charger can be used for full recharging of batteries or for a gentle top-up during the winter, especially for motor bikes and vintage cars.
The charger has two modes:
COLD TEMPERATURE mode: At temperatures below 5 °C (41 °F) the battery will be fully charged to 100% despite the cold.
REFRESH mode: If the battery is completely discharged, the charger automatically switches to refresh mode and charges the battery for 20min. by pulse charging until a sufficient voltage for the normal charging process has been reached. After the completion of the refresh mode a normal charging process can be started.
Lead acid charger for 6V/12V/24V lead acid, SLA batteries
With the help of high-quality pole terminals a fast and reliable contact of lead acid batteries is possible
Automatic voltage identification/ Autosensing
Clear LED display - easy to use
Adjustable charging current
Automatic REFRESH mode, if the battery is completely discharged
Selectable COLD TEMP mode at cold temperatures
Faulty cell detection
Protection against short-circuit, wrong polarity and overcharge
Automatic start of recharge, if the battery is left connected to the charger
Ideal maintenance of lead acid batteries during winter time - no deep discharge
Power cable 1.8m, charging cable 2m
Protected against dirt and water jets thanks to IP65
Manufacturer's part: Ansmann 1001-0016-UK, ALCT 6-24/2 UK
The Ansmann ALCT 6-24/4 UK is a Lead Acid Battery Charger for 6V, 12V and 24V batteries. The 4A compact and lightweight charger is ideal for HGV's, cars, boats, motorcycles, scooters, wheeled garden equipment or children's vehicles.
The LED indicators of the charger clearly show the charge progress and lets you know when the battery is ready.
This high quality lead acid battery charger can be used for full recharging of batteries or for a gentle top-up during the winter, especially for motor bikes and vintage cars.
The charger has two modes:
COLD TEMPERATURE mode: At temperatures below 5 °C (41 °F) the battery will be fully charged to 100% despite the cold.
REFRESH mode: If the battery is completely discharged, the charger automatically switches to refresh mode and charges the battery for 20min. by pulse charging until a sufficient voltage for the normal charging process has been reached. After the completion of the refresh mode a normal charging process can be started.
Lead acid charger for 6V/12V/24V lead acid, SLA batteries
With the help of high-quality pole terminals a f ast and reliable contact of lead acid batteries is possible
Automatic voltage identification / Autosensing
Clear LED display - easy to use
Adjustable charging current
Automatic REFRESH mode, if the battery is completely discharged
Selectable COLD TEMP mode at cold temperatures
Faulty cell detection
Protection against short-circuit, wrong polarity and overcharge
Automatic start of recharge, if the battery is left connected to the charger
Ideal maintenance of lead acid batteries during winter time - no deep discharge
Power cable 1.8m, charging cable 2m
Protected against dirt and water jets thanks to IP65
The ACS48 Traveller is a charger designed for 4 to 8 cells NiMH/NiCd battery packs of 4.8 to 9.6V. The charger has a universal voltage input and features eight invertible output plugs, plus an output cable with a Tamiya socket for use with racing packs.
This travel charger is a USB adaptor that features 2x USB ports and an output current of 2.4A. Intelligent charge control detects the highest charge current possible for the connected device and the adaptor can be used to charge most smartphones and USB devices. The travel charger has a compact and efficient design, and the interchangeable mains plus make the device perfect for wheen travelling, enabling hassle-free charging of devices.
Suitable for most smartphones and USB applications
The Powerline 4 Smart from ANSMANN is an intelligent and simple to use charger for 1-4 AA or AAA NiMH batteries.
With its automatic diagnosis and individual monitoring of inserted batteries, the Powerline 4 Smart can handle different sizes and capacities of battery at the same time and will attempt to recover deeply discharged batteries.
Compact and flexible in design, the charger features a changeable plug system on the back for use with UK or EU mains sockets.
Simple to use intelligent charger for 1, 2, 3 or 4 AAA or AA NiMH rechargeable batteries
Auto-diagnosis of inserted batteries – if necessary automatic repair mode is used to re-activate deeply discharged batteries
Gentle pre-charging before fast charging at 500mA per position
Charging occurs automatically as soon as a rechargeable battery is inserted correctly
Faulty batteries and reverse polarity detection
Battery status is displayed clearly by coloured LEDs
Battery full detection and automatic switch to impulse maintenance charging
Multiple overcharge protection through voltage monitoring (-dV) and safety timer (8hrs)
The Lithium 2 battery charger is designed for charging both NiMH AA/AAA batteries and Li-Ion cylindrical batteries from one device. The charger accepts many common sizes of 3.6V/3.7V Li-Ion batteries. Charging slots are individually monitored and have automatic detection of chemistry so both a Li-Ion and a NiMH battery at the same time. The charger is powered by 5V DC, so that it can be powered via USB from a USB charger or a PC/laptop.
Compatible with Li-Ion (3.6V/3.7V) and AA/AAA NiMHbatteries (1.2V)
Li-Ion sizes: 26650, 22650, 18650, 18500, 17670, 16340, 14500 and more
Includes Micro-USB charge cable
Single slot monitoring
Automatic detection of chemistry
Automatic start
Microcontroller-monitored charge control (CC-CV with Li-Ion, 0dV/-dV with NiMH)
Automatic battery-full detection and termination of the charge process
The Ansmann 1001-0080-UK Powerline 4 Ultra is a NiMH & Li-Ion battery charger suitable for AAA, AA, C & D NiMH rechargeable batteries as well as Lithium-Ion 10400 - 32650 rechargeable batteries.
LCD display shows battery voltage, current, capacity, charge time, charge mode and charge status
No. of charging positions: 4
Max. charging capacity: 12000mAh
Input 12V DC, 3A
Separate plug-in power supply
Charger unit includes USB output 5V, 2A
Dimensions - charger: 170 x 109.8 x 37.5mm
Dimensions - power supply: 90 x 49 x 40.4 (62.4 including plug pins)
The Ansmann Comfort Mini battery charger is the next level in NiMH charging technology.
The good people at Ansmann have developed the Perfect 7 technology as a safer and more efficient way of charging your NiMH batteries, prolonging your battery's life as well as using USB power for the charging source.
At the start of charging the charger will check the battery and if the charger thinks the battery is not up to scratch it will flash red to let you know that the battery is no good. After the charging is complete the charger will give a gentle pulsed trickle charge, making sure your batteries are ready when you need them.
A clever feature of the charger is that if the USB power supply doesn't give sufficient current for the charger to fully operate, the charger will put the process on hold for one or two of the batteries (with an orange flashing light) and charge those once the others are fully charged
Fast charger for 1 or 2 NiMH AA or AAA batteries
Batteries not supplied
Microprocessor PERFECT 7 technology
Powered by USB (home USB charger, laptop or PC, powerbank)
Micro USB socket
3 Colour status LED
Includes micro USB cable
Multiple protection
Typical charge times AAA 1000mAh 3 hours, AA 2100mAh 3 hours
The Ansmann Comfort Mini battery charger is the next level in NiMH charging technology.
The good people at Ansmann have developed the Perfect 7 technology as a safer and more efficient way of charging your NiMH batteries, prolonging your battery's life as well as using USB power for the charging source.
At the start of charging the charger will check the battery and if the charger thinks the battery is not up to scratch it will flash red to let you know that the battery is no good. After the charging is complete the charger will give a gentle pulsed trickle charge, making sure your batteries are ready when you need them.
A clever feature of the charger is that if the USB power supply doesn't give sufficient current for the charger to fully operate, the charger will put the process on hold for one or two of the batteries (with an orange flashing light) and charge those once the others are fully charged
Fast charger for 1 or 2 NiMH AA or AAA batteries
Supplied with batteries
Microprocessor PERFECT 7 technology
Powered by USB (home USB charger, laptop or PC, powerbank)
Micro USB socket
3 Colour status LED
Includes micro USB cable
Multiple protection
Typical charge times AAA 1000mAh 3 hours, AA 2100mAh 3 hours
The Ansmann Comfort Smart battery charger is the next level in NiMH charging technology.
The good people at Ansmann have developed the Perfect 7 technology as a safer and more efficient way of charging your NiMH batteries, prolonging your battery's life as well as using USB power for the charging source.
At the start of charging the charger will check the battery and if the charger thinks the battery is not up to scratch it will flash red to let you know that the battery is no good. After the charging is complete the charger will give a gentle pulsed trickle charge, making sure your batteries are ready when you need them.
A clever feature of the charger is that if the USB power supply doesn't give sufficient current for the charger to fully operate, the charger will put the process on hold for one or two of the batteries (with an orange flashing light) and charge those once the others are fully charged
Fast charger for 1 to 4 NiMH AA or AAA batteries
Batteries not supplied
Microprocessor PERFECT 7 technology
Powered by USB (home USB charger, laptop or PC, powerbank)
Micro USB socket
3 Colour status LED
Includes micro USB cable
Multiple protection
Typical charge times AAA 1000mAh 3 hours, AA 2100mAh 3 hours
The Ansmann Comfort Smart battery charger is the next level in NiMH charging technology.
The good people at Ansmann have developed the Perfect 7 technology as a safer and more efficient way of charging your NiMH batteries, prolonging your battery's life as well as using USB power for the charging source.
At the start of charging the charger will check the battery and if the charger thinks the battery is not up to scratch it will flash red to let you know that the battery is no good. After the charging is complete the charger will give a gentle pulsed trickle charge, making sure your batteries are ready when you need them.
A clever feature of the charger is that if the USB power supply doesn't give sufficient current for the charger to fully operate, the charger will put the process on hold for one or two of the batteries (with an orange flashing light) and charge those once the others are fully charged
Fast charger for 1 to 4 NiMH AA or AAA batteries
Supplied with batteries
Microprocessor PERFECT 7 technology
Powered by USB (home USB charger, laptop or PC, powerbank)
Micro USB socket
3 Colour status LED
Includes micro USB cable
Multiple protection
Typical charge times AAA 1000mAh 3 hours, AA 2100mAh 3 hours
The Ansmann Comfort Multi battery charger is the next level in NiMH charging technology.
The good people at Ansmann have developed the Perfect 7 technology as a safer and more efficient way of charging your NiMH batteries, prolonging your battery's life as well as using USB power for the charging source.
At the start of charging the charger will check the battery and if the charger thinks the battery is not up to scratch it will flash red to let you know that the battery is no good. After the charging is complete the charger will give a gentle pulsed trickle charge, making sure your batteries are ready when you need them.
A clever feature of the charger is that if the USB power supply doesn't give sufficient current for the charger to fully operate, the charger will put the process on hold for one or two of the batteries (with an orange flashing light) and charge those once the others are fully charged
Fast charger for 1 to 4 NiMH AA, AAA, C, D and 9V batteries
Batteries not supplied
Microprocessor PERFECT 7 technology
Powered by USB (home USB charger, laptop or PC, powerbank)
This Comfort Plus Battery Charger charges AAA, AA & PP3 9V batteries precisely and quickly. All thanks to the 'Perfect 7' charge technology this battery charger maximises the service life and performance of the rechargeable batteries.
The simple 3-colour LED display makes it easy to read the individual cell status.
Supplied without batteries.
Charging status indicator via LED
Individual charging of each cell position
For round cells: Capacity quick test for approx. 5 seconds after inserting the cells
Microprocessor controlled charging
Automatic charging current adjustment Multiple over-charging protection
This battery charger has an automatic shut down, over charge protection, single shaft monitoring and safety timer after 5.5hrs. The battery charger also detects defective batteries and non-rechargeable batteries giving you peace of mind.
This Comfort Plus Battery Charger charges AAA, AA & PP3 9V batteries precisely and quickly. All thanks to the 'Perfect 7' charge technology this battery charger maximises the service life and performance of the rechargeable batteries.
The simple 3-colour LED display makes it easy to read the individual cell status.
Supplied with 4 x AA 2100mAh batteries.
Time to charge 4 x 2100mAh batteries approx. 4 hours 45 minutes
Charging status indicator via LED
Individual charging of each cell position
For round cells: Capacity quick test for approx. 5 seconds after inserting the cells
Microprocessor controlled charging
Automatic charging current adjustment Multiple over-charging protection
This battery charger has an automatic shut down, over charge protection, single shaft monitoring and safety timer after 5.5hrs. The battery charger also detects defective batteries and non-rechargeable batteries giving you peace of mind.
This Comfort Plus Battery Charger charges AAA, AA & PP3 9V batteries precisely and quickly. All thanks to the 'Perfect 7' charge technology this battery charger maximises the service life and performance of the rechargeable batteries.
The simple 3-colour LED display makes it easy to read the individual cell status.
Supplied with 4 x AA 2500mAh batteries.
Time to charge 4 x 2500mAh batteries approx. 5 hours 15 minutes
Charging status indicator via LED
Individual charging of each cell position
For round cells: Capacity quick test for approx. 5 seconds after inserting the cells
Microprocessor controlled charging
Automatic charging current adjustment Multiple over-charging protection
This battery charger has an automatic shut down, over charge protection, single shaft monitoring and safety timer after 5.5hrs. The battery charger also detects defective batteries and non-rechargeable batteries giving you peace of mind.
The Lithium 4 from ANSMANN is an intelligent and versatile charger which offers charging for both NiMH and cylindrical Li-Ion batteries from a single unit.
The Lithium 4 monitors each slot individually and can charge both Li-Ion and NiMH batteries at the same time, and automatically detects which type of battery has been inserted. The charger also offers a manually selectable mode for Lithium Iron Phosphate (LiFePO4) batteries.
Supplied without batteries.
Charger for up to 4 Li-Ion rechargeable batteries (3.6V/3.7V) / LiFePO4 (3.2V) 26650, 22650, 18650, 18500, 17670, 16340, 14500 etc. or 1-4 NiMH rechargeable batteries (1.2V) / AAA / AA or 1-2 C size
Includes a USB type-C charging cable
Single slot monitoring
Automatic detection of Li-Ion and NiMH rechargeable batteries, manual selection of LiFePO4 rechargeablebatteries
Charging starts automatically once the batteries have been inserted with the correct polarity
Microcontroller-monitored charging control (CC-CV with Li-Ion/LiFePO4, 0dV/-dV with NiMH)
Temperature monitoring of each individual slot, regardless of the battery type
Automatic battery-full detection and termination of the charging process
Trickle charging for NiMH rechargeable batteries
Display of the charging status and the battery parameters via the LCD display
The ANSMANN WiLine 5 is a compact wireless charger for your Qi-capable devices, with 5 watt technology and 1x micro USB input
The 5W inductive charger has built-in LED indications to show charging status, including detection of foreign objects on the receiver and is compatible with all Qi-capable smartphones and Qi receivers.
Wireless Inductive Charger
Maximum 5W Output Power
Compatible with all Qi-capable smartphones & Qi receivers
The ANSMANN WiLine 15R wireless charger is a inductive wireless charger with integrated LED display which is compatible with all Qi-capable smartphones and Qi receivers. It is extremely compact with a light housing.
This battery charger is IP30 rated and has UK, EU, US and AUS input plugs so can be used worldwide. Included is a set of 8 output plugs that allow this charger to be used for many battery packs. The charger is protected against short-circuits and wrong polarity to ensure safety.
The Ansmann BCA 120-350 is a Low Cost Plug-In charger for most types of small 12V Lead Acid Batteries (including Gel filled, Maintenance Free and VRLA). Recommended for 0.7Ah - 9Ah batteries, but it can charge larger batteries over a longer period of time.
This fully automatic battery charger has Short Circuit, Overload and Reverse Connection protection and switches to a trickle charge once the battery is fully charged allowing it to be left connected to your battery indefinitely.
This Ansmann Lead Acid Battery Charger has 6.35mm F01A Spade (Faston) connectors and is suitable for stand-by as well as parallel operation of lead acid/sealed lead acid batteries.
The LED charge indicator lets you know when the battery is charging and when the charger has switched to a trickle charge.
350mA main charge current switches to a low 5mA - 15mA trickle charge once the battery reaches a full charge
Charger can be left on continually without risk of damaging or overcharging your battery
The Powerline 2 from Ansmann is an intelligent NiMH battery charger can charge 1 or 2, 9V PP3 rechargeable batteries and can significantly lengthen their service life by always charging them at optimum levels. Each of the 2 slots are individually monitored to ensure that the performance of one battery does not have any influence on the charging of the other.
The charger has a high-quality, microcontroller-controlled charging system that utilises several methods to protect the rechargeable battery from rapid wear. These include the automatic shutdown of the charge process as soon as the cells are fully charged as well as protective maintenance charging for all batteries after the actual charge process, amongst others. High-capacity cells in particular must be treated with great care due to their high energy density.
A colour-coded LED display is integrated above each slot to enable quick and simple reading of the charge status for your rechargeable batteries.
Intelligent charger for 1 or 2x 9V PP3 NiMH rechargeable batteries with 8.4V nominal voltage
Automatic charge start after rechargeable battery is inserted
Microcontroller-monitored charge control
Multiple over-charging protection through voltage monitoring (-dU) and safety timer
Fully-charged detection and automatic changeover to pulse maintenance charging
Individual slot monitoring (separate charging for each rechargeable battery)
Reverse polarity protection
Defective battery detection
Indication of the rechargeable battery status via a multicolour LED for each charge slot
This high quality battery charger with 4 free batteries from Duracell provides good charging capability at an affordable price. Charges both AA and AAA rechargeable batteries.
Typically charges in 6 hours
Lasts up to 3 times longer in digital cameras (compared to ordinary alkaline)
Duracell rechargeable batteries help keep your devices running longer
LED indicator to indicate status of charging process
The GP GPACSB631010 Recyko Universal Charger B631 can simultaneously charge AAA, AA, C D and 9 V batteries. The compact charger is also equipped with a practical cover that protects batteries from dust and dirt. It has an Auto Power Off mechanism which means batteries can remain in the charger whether fully charged or not.
The GP GPACSM452000 Recyko Speed Charger M452 can charge AAA & AA batteries. The compact charger is also equipped with a practical cover that protects batteries from dust and dirt. It has an Auto Power Off mechanism which means batteries can remain in the charger whether fully charged or not.
The GP GPACSM452001 Recyko Speed Charger & Dock is a compact charger which is also equipped with a practical cover that protects batteries from dust and dirt. It has an Auto Power Off mechanism which means batteries can remain in the charger whether fully charged or not.
An AC/DC Desk Top Power Supply from Ideal Power. The DC output power rating of this model is 14.7V 1A, 15W. The PSU has a C14 universal input with approvals to International standards exceeding the latest efficiency levels.
An AC/DC Desk Top Power Supply from Ideal Power. The DC output power rating of this model is 14.7V 2A, 29W. The PSU has a C14 universal input with approvals to International standards exceeding the latest efficiency levels.
This miniature multi-step battery charger from Ideal Power has an auto shutdown feature when the battery is fully charged. This compact charger will charge lead acid batteries at a fast, normal and trickle rate. It is supplied with crocodile clip connectors for ease of use.
Multi step charger set-up and auto shutdown (tri step)
Fast charge, normal charger, average charger
Voltage with auto sensor battery
Output short circuit protection
Universal input voltage suitable for worldwide operation
This miniature multi-step battery charger from Ideal Power has an auto shutdown feature when the battery is fully charged. This compact charger will charge lead acid batteries at a fast, normal and trickle rate. It is supplied with crocodile clip connectors for ease of use.
Multi step charger set-up and auto shutdown (tri step)
Fast charge, normal charger, average charger
Voltage with auto sensor battery
Output short circuit protection
Universal input voltage suitable for worldwide operation
This compact multi-step battery charger from Ideal Power has an auto shutdown feature when the battery is fully charged. This metal bodied compact charger will charge lead acid batteries at a fast, normal and trickle rate. It is supplied with crocodile clip connectors for ease of use.
Multi step charger set-up and auto shutdown (tri step)
Fast charge, normal charger, average charger
Voltage with auto sensor battery
Full charge with auto shut down
Output short circuit protection
Universal input voltage suitable for worldwide operation
A compact multi-step 5A battery charger with an auto shutdown feature when the battery is fully charged. This metal bodied compact charger will charge lead acid batteries at a fast, normal and trickle rate. It is supplied with crocodile clip connectors for ease of use.
Max. output current 5A
Multi step charger set-up and auto shutdown (tri step)
Fast charge, normal charger, average charger
Voltage with auto sensor battery
Full charge with auto shut down
Output short circuit protection
Universal input voltage suitable for worldwide operation
This compact multi-step battery charger from Ideal Power has an auto shutdown feature when the battery is fully charged. This metal bodied compact charger will charge lead acid batteries at a fast, normal and trickle rate. It is supplied with crocodile clip connectors for ease of use.
Multi step charger set-up and auto shutdown (tri step)
Fast charge, normal charger, average charger
Voltage with auto sensor battery
Full charge with auto shut down
Output short circuit protection
Universal input voltage suitable for worldwide operation
This compact multi-step battery charger from Ideal Power has an auto shutdown feature when the battery is fully charged. This metal bodied compact charger will charge lead acid batteries at a fast, normal and trickle rate. It is supplied with crocodile clip connectors for ease of use.
Multi step charger set-up and auto shutdown (tri step)
Fast charge, normal charger, average charger
Voltage with auto sensor battery
Full charge with auto shut down
Output short circuit protection
Universal input voltage suitable for worldwide operation
A compact multi-step 10A battery charger with an auto shutdown feature when the battery is fully charged. This metal bodied compact charger will charge lead acid batteries at a fast, normal and trickle rate. It is supplied with crocodile clip connectors for ease of use.
Max. output current 10A
Multi step charger set-up and auto shutdown (tri step)
Fast charge, normal charger, average charger
Voltage with auto sensor battery
Full charge with auto shut down
Output short circuit protection
Universal input voltage suitable for worldwide operation
This compact multi-step battery charger from Ideal Power has an auto shutdown feature when the battery is fully charged. The metal bodied compact charger will charge lead acid batteries at a fast, normal and trickle rate. It is supplied with crocodile clip connectors for ease of use.
Output voltage 24V DC
Output current 25A
Multi step charger set-up and auto shutdown (tri step)
Fast charge, normal charger, average charger
Voltage with auto sensor battery
Full charge with auto shut down
Output short circuit protection
Universal input voltage suitable for worldwide operation
This compact multi-step battery charger from Ideal Power has an auto shutdown feature when the battery is fully charged. The metal bodied compact charger will charge lead acid batteries at a fast, normal and trickle rate. It is supplied with crocodile clip connectors for ease of use.
Output voltage 12V DC
Output current 50A
Multi step charger set-up and auto shutdown (tri step)
Fast charge, normal charger, average charger
Voltage with auto sensor battery
Full charge with auto shut down
Output short circuit protection
Universal input voltage suitable for worldwide operation
A 1A LiPo battery charger for use with LiPo battery packs of between 2 and 3 cells. The charger is user-friendly as well as fast and efficient, needing only to be plugged in to the mains and connected to the battery to commence the charging process. An integrated balance ensures that all cells in a battery pack are charged evenly and the charger shuts down when the shut-down voltage is achieved.
Suitable for LiPo rechargeable battery packs
Universal input voltage
LED Indication of charge status
Built-in power supply
Includes charger, power cable and operating instructions
The Electronics in Meccano Circuits Shop is an affiliate of Rapid Electronics, and any purchases you make help support this website without affecting the price you pay! Any enquiries regarding products or order status should be directed to Rapid Electronics at www.rapidonline.com.
The Circuits Shop
