Precision machined carburettor jet cleaning and sizing kit. 20 Sizes ranging from 0.45-1.5mm in 0.05mm increments. For classic cars and larger jetted motorcycles. Folding design makes it easy for storage and small enough to carry. May also be used to clean gas jets on welding torches.

Suitable for supporting large multi-cylinder engines (maximum weight 100kg). The supports can rotate for accessibility to all parts of the engine. Width and length adjustable. Engine stand's frame elongates to allow adjustment for length between mounting points.

• Suitable for supporting large multi-cylinder engines (maximum weight 100kg).
• The supports can rotate for accessibility to all parts of the engine.
• Width and length adjustable.
• Engine stand's frame elongates to allow adjustment for length between mounting points.
• Model No. MES03

Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm(85lb.ft) of torque. Low profile design suitable for use in confined areas.

• Cap type filter wrench prevents damage to filter housing.
• Will withstand up to 115Nm(85lb.ft) of torque.
• Low profile design suitable for use in confined areas.
• Model No. MS044

Cap type filter wrench prevents damage to filter housing and will withstand up to 115Nm(85lb.ft) of torque. Low profile design suitable for use in confined areas.

• Cap type filter wrench prevents damage to filter housing.
• Will withstand up to 115Nm(85lb.ft) of torque.
• Low profile design suitable for use in confined areas.
• Model No. MS045

Suitable for removing and installing oil filters with diameters ranging from Ø65-86mm. 25mm Wide spring steel band with corrosion-resistant coating. PVC dipped multi-position handle can be applied at 180° to the filter. Automatically tightens as pressure is applied.

• Suitable for removing and installing oil filters with diameters ranging from Ø65-86mm.
• 25mm Wide spring steel band with corrosion-resistant coating.
• PVC dipped multi-position handle can be applied at 180° to the filter.
• Automatically tightens as pressure is applied.
• Model No. MS046

Set of three gauges with connectors and adaptors for testing compression and fuel pressure on motorcycles. Gauges range from 0-300psi for compression testing, 0-7bar (0-100psi) for fuel pressure and 0-1bar (0-100kPa) for low pressure fuel.

Constructed from composite materials and suitable for the extraction of engine or transmission oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Also suitable for low viscosity fluids such as water. Supplied with 2 suction probes, easy-pour spout and cover cap. Use probes to remove engine oil through the dipstick tube.

Double end, traditional style, long reach spark plug box spanners with L-bar. Supplied in a pouch for safe storage.

• Double end, traditional style, long reach spark plug box spanners with L-bar.
• Sizes: 14 x 16, 16 x 18, 17 x 21mm.
• Length: 150mm.
• Supplied in a pouch for safe storage.
• Model No. MS165

Quality construction with sprung steel wrap and friction action tension mechanism. Ideal for small engine pistons. Supplied with steel key.

• Quality construction with sprung steel wrap and friction action tension mechanism.
• Ideal for small engine pistons.
• Supplied with steel key.
• Depth: 50mm
• Model No. SMC15

Set includes three wrenches; 8mm, 9mm, 10mm and three types of adjuster shafts; flat blade type, 3mm and 4mm square type. The wrenches and shafts are interchangeable to give nine different combinations suitable for tappet adjustments on most motorcycle and ATV engines.

• Set includes three wrenches
• 8, 9, 10mm and three types of adjuster shafts
• flat blade type, 3mm and 4mm square type.
• Interchangeable wrenches and shafts to give nine different combinations.
• Suitable for tappet adjustments on most motorcycle and ATV engines.
• Model No. SMC24

Fully adjustable robust tool for assisting in the successful separation of the engine crankcases to allow access to the crank shaft, connecting rods and other internal components. Suitable for use on a variety of motorcycle and ATV engines. Supplied in storage case.

• Fully adjustable and suitable for use on a variety of motorcycle and ATV engines.
• Robust tool for assisting in the successful separation of the engine crankcases to allow access to the crank shaft, connecting rods and other internal components.
• Contents: Mounting Bolts: M8 x 1.25 x 90mm (x3), Mounting Bolt Adaptors
• M6 x 1 x 65mm, M6 x 1 x 57mm, M6 x 1 x 49mm, Main Threaded Bar
• M14 x 1.5 x 180mm.
• Supplied in storage case.
• Model No. SMC30

Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on motorcycles with 20 or 24mm lock nuts.

• Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.
• Manufactured from heavy-duty heat treated steel.
• Suitable for use on motorcycles with 20 or 24mm lock nuts.
• Model No. SMC6

Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on motorcycles with 24mm lock nuts.

• Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.
• Manufactured from heavy-duty heat treated steel.
• Suitable for use on motorcycles with 24mm lock nuts.
• Model No. SMC7

Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch. Manufactured from heavy-duty heat treated steel. Suitable for use on motorcycles with 20mm lock nuts.

• Designed to loosen and tighten the lock nut for the removal and installation of a motorcycle clutch.
• Manufactured from heavy-duty heat treated steel.
• Suitable for use on motorcycles with 20mm lock nuts.
• Model No. SMC9

Suitable for flywheel and clutch pulleys on a large range of motorcycles. Adjustable strap for use on different pulley sizes. Rotate handle so foot contacts against pulley to secure. To release, simply rotate in the opposite direction. Vinyl dipped strap and foot gives added grip.

• Suitable for flywheel and clutch pulleys on a large range of motorcycles.
• Adjustable strap for use on different pulley sizes.
• Rotate handle so foot contacts against pulley to secure, rotate in the opposite direction to release.
• Capacity: Ø45-120mm.
• Vinyl dipped strap and foot gives added grip.
• Model No. VS1811

Suitable for most motorcycle engines. Features two sizes of threaded adjusters for increased applications and five sizes of interchangeable jaws. Ø50-170mm Capacity and 120mm throat depth. Supplied in storage case.